Arnott makes air suspension parts and complete systems for vehicles that use air springs instead of traditional coil springs

Arnott is a manufacturer of air suspension components — primarily air springs, compressors, and control modules — sold as replacement parts and complete assemblies. The company does not make suspension for every vehicle; they focus on models where air suspension is either the original equipment or a common upgrade path. Their parts are sold through retailers, repair shops, and directly to consumers.

If your vehicle has air suspension that has failed, you will encounter Arnott parts in two ways: as individual components you buy separately, or as a complete assembly that replaces the entire air suspension system at once. The choice between them depends on what has actually broken, how much labor you want to pay for, and whether you want to keep the original system design or switch to a different one.

Key Takeaways

  • Arnott manufactures air springs, compressors, and electronic control modules as both individual parts and complete pre-assembled systems.
  • Their products are designed as replacements for failed original equipment, not as upgrades to working suspension systems.
  • A complete Arnott assembly costs more upfront but eliminates the labor of sourcing and installing multiple individual components.
  • Installation requires a shop familiar with air suspension work, as the job involves electrical connections and pressure testing that differ from conventional spring replacement.

What breaks in an air suspension system and what Arnott sells to fix it

Air suspension systems have three main failure points: the air spring itself (the rubber and metal bladder that holds pressurized air), the compressor (which pressurizes the air), and the electronic control module (which tells the compressor when to run and manages the system's height and stiffness).

When an air spring leaks or ruptures, the vehicle sags on that corner and the compressor runs constantly trying to maintain pressure. When the compressor fails, the system cannot build pressure at all and the vehicle drops. When the control module fails, the system may not respond to height adjustments, may run the compressor continuously, or may shut down entirely. Arnott sells replacement parts for each of these components individually, or sells a complete assembly that includes all three plus the necessary hoses and fittings, already wired and tested.

Individual parts versus complete assemblies

Buying individual Arnott components costs less per part but requires your shop to diagnose which component has actually failed, source each piece separately, and install them one at a time. This approach makes sense if only one component is clearly bad — for example, if a single air spring is leaking but the compressor and module are still working. It also makes sense if you want to keep your original system design and only replace what broke.

A complete Arnott assembly arrives as a kit with all components pre-matched and pre-wired. Installation is faster because the shop installs one unit instead of three, and there is no risk of mixing incompatible parts. The tradeoff is higher upfront cost. Complete assemblies are typically chosen when multiple components have failed, when the original system is old enough that other parts may fail soon, or when the vehicle owner wants to avoid a second repair visit in a year.

Arnott systems versus original equipment suspension

Arnott air suspension is not identical to the original equipment that came on your vehicle. The components are engineered to function the same way — they pressurize air, hold it in springs, and respond to electronic commands — but they are built by a different manufacturer using different materials and tolerances. Some Arnott systems are designed to be direct replacements that bolt in without modification; others require minor bracket adjustments or hose routing changes.

The practical difference is usually small. Arnott parts are widely used in the repair industry and have a track record across thousands of vehicles. The main consideration is whether your shop has experience installing them on your specific vehicle model. A shop that regularly repairs air suspension will know whether an Arnott assembly is a straightforward swap or requires custom work.

Cost comparison: repair versus replacement

Repairing air suspension by replacing individual failed components typically costs between the price of the part itself plus 2 to 4 hours of labor, depending on which component failed and how accessible it is. Replacing a single air spring might run $400 to $800 total; replacing a compressor might run $600 to $1,200. A complete Arnott assembly typically costs $1,200 to $2,500 depending on the vehicle, plus 3 to 5 hours of installation labor.

The decision point is usually whether you trust that only one component has failed. If your air suspension is 10+ years old and multiple components show signs of wear, a complete assembly often costs less in total labor than replacing parts one at a time over the next few years. If only one component is clearly bad and the rest of the system is working, individual parts are usually the cheaper route.

Where to buy Arnott suspension parts

Arnott parts are sold through online retailers including RockAuto, Amazon, eBay, and specialized suspension retailers. They are also stocked by some local repair shops and suspension specialists. Prices vary between retailers; it is worth checking three or four sources before ordering, as the same part can differ by $100 or more depending on the seller.

If you are buying parts to install yourself, you will need a shop to do the installation and pressure testing — air suspension work requires specialized equipment and knowledge that most DIY mechanics do not have. If you are buying through a repair shop, the shop will source the parts and handle installation as part of the repair estimate.

Installation and what to expect at the shop

Installing Arnott air suspension parts requires the vehicle to be lifted, the old components removed, new components installed, hoses connected and tested for leaks, the electronic module programmed or connected to the vehicle's computer, and the system pressurized and tested for proper height and response. The work is not difficult for a shop that does it regularly, but it is not a job for a general mechanic unfamiliar with air suspension.

Before you take your vehicle to a shop, ask whether they have experience with air suspension on your specific vehicle model. A shop that specializes in suspension or that regularly repairs luxury vehicles (which often use air suspension) will have the right tools and knowledge. A general repair shop may need to send the work out to a specialist, which adds time and cost.

Frequently Asked Questions

Can I install Arnott air suspension parts myself?

Not without specialized equipment. Air suspension requires pressure testing, electronic module programming, and height calibration that need a shop with air suspension experience. You can remove the old parts yourself if you are mechanically inclined, but installation and testing must be done by a professional.

Will Arnott parts work on my specific vehicle?

Arnott makes parts for many vehicles, but not all. Check the product listing for your vehicle's year, make, and model before ordering. If Arnott does not make a part for your vehicle, your shop can tell you what alternatives exist.

How long do Arnott air suspension parts last?

Arnott parts are designed to last as long as original equipment — typically 8 to 12 years depending on driving conditions and maintenance. They are not a permanent fix; they are a replacement for failed original parts.

What is the difference between an Arnott assembly and buying parts separately?

An assembly is pre-matched and pre-wired, so installation is faster and there is no risk of incompatible parts. Buying separately costs less upfront but requires your shop to diagnose each failure and install multiple components over time.

Should I replace my whole air suspension system or just the part that failed?

If only one component is clearly bad and the rest of the system is working, replace just that part. If multiple components show wear or if the system is very old, a complete assembly often costs less in total labor over the next few years.