BDS lift kits raise your truck or SUV's frame and suspension to increase ground clearance and accommodate larger tires

BDS Suspension is a manufacturer that makes bolt-on lift kits for trucks and SUVs—primarily Chevrolet, GMC, Ford, and Ram vehicles. A BDS kit lifts your vehicle's frame higher off the ground by replacing or modifying your suspension components. The result is more space between your tires and the undercarriage, which lets you fit larger tires and clear obstacles that would otherwise catch your vehicle's belly.

BDS kits come in different heights, typically ranging from 2 inches to 6 inches or more, depending on the vehicle model and kit type. The height you choose affects how much your truck sits up, how it handles on the road, and what other modifications you may need to make—like adjusting your driveshaft, brake lines, or steering components.

Whether you need a BDS kit depends on what you plan to do with your vehicle. If you want to fit 35-inch or larger tires, tow heavy loads, or drive on rough terrain, a lift kit may be necessary or helpful. If you drive mostly on paved roads and have no plans to change your tires, a lift kit is optional and will mainly affect how your truck looks.

Key Takeaways

  • BDS lift kits raise your vehicle's frame by replacing springs, shocks, or control arms, with heights ranging from 2 to 6 inches depending on the model.
  • A lift kit lets you fit larger tires and clear obstacles, but it also changes your vehicle's handling, fuel economy, and how high your center of gravity sits.
  • Installation requires mechanical work and often takes 8 to 16 hours; many owners have it done at a shop rather than attempting it themselves.
  • Lifting your vehicle may require additional modifications to your driveshaft, brake lines, steering, and suspension geometry to work safely.
  • Check your vehicle's warranty and your state's vehicle height regulations before purchasing, as some lifts can void coverage or exceed legal limits.

How BDS lift kits work and what they replace

A BDS lift kit modifies your suspension by replacing or adjusting the components that connect your frame to your wheels. The most common approach is to replace your factory springs with longer, stiffer springs that sit higher. Some kits also replace your shocks (the dampers that control bouncing) with longer shocks designed to work with the new spring height.

Other BDS kits use a different strategy: they add spacers or blocks between your frame and axle, or they replace control arms—the metal rods that link your frame to your wheels—with longer versions. The method depends on your vehicle's suspension type (independent front suspension, solid axle, coil springs, leaf springs, and so on) and how much lift you want.

When you raise your frame, the angle of your driveshaft (the shaft that carries power from your transmission to your rear axle) changes. A BDS kit often includes a new driveshaft or a CV joint to keep power flowing smoothly. Similarly, your brake lines and steering components may need adjustment so they don't stretch or bind as your suspension moves.

Lift heights and what each one means for your vehicle

BDS offers kits in several standard heights. A 2-inch lift is the mildest option—it raises your truck slightly, fits tires up to about 33 inches, and usually requires minimal additional work. A 4-inch lift is more common for serious off-road use and fits tires up to 35 inches. A 6-inch lift or higher is for extreme terrain and larger tires, but it also changes your vehicle's balance and handling more dramatically.

The height you choose affects ride quality, fuel economy, and how your truck behaves on the highway. A 2-inch lift often feels nearly stock; a 6-inch lift will feel noticeably different, with a higher center of gravity and a different steering feel. Taller lifts also make it harder to load cargo into a truck bed and can make entering and exiting the cab more difficult.

Your choice also depends on what tires you want to run. If you plan to fit 35-inch tires, you typically need at least a 4-inch lift. If you want 37-inch tires, you may need 6 inches or more, plus additional modifications like trimming your fenders or adjusting your suspension geometry. BDS publishes compatibility charts for each vehicle model showing which lift height pairs with which tire size.

Installation, cost, and what to expect at a shop

Installing a BDS lift kit is not a straightforward bolt-on job for most people. The work involves removing your wheels, unbolting your suspension components, installing new springs or spacers, and reassembling everything while keeping your vehicle level and aligned. The process typically takes 8 to 16 hours, depending on the kit type and your vehicle's condition.

Many owners choose to have a shop install their kit rather than doing it themselves. A professional shop will have the tools to safely lift your vehicle, remove and install suspension parts, and perform a wheel alignment afterward—a critical step that ensures your tires wear evenly and your steering feels right. Alignment alone costs $100 to $300 and is not optional after a lift.

The total cost of a BDS kit plus installation varies widely. A basic 2-inch kit might cost $400 to $800 for the parts alone, while a 6-inch kit can run $1,500 to $3,000 or more. Labor at a shop typically adds $500 to $1,500 depending on your location and the shop's rates. Budget for alignment, new shocks if your kit doesn't include them, and possibly new brake lines or a driveshaft.

How a lift kit affects your vehicle's handling and safety

Lifting your vehicle changes how it drives. Your center of gravity moves higher, which means your truck is more prone to tipping in sharp turns or emergency maneuvers. A taller vehicle also has a longer stopping distance because the weight transfer during braking is different. On the highway, a lifted truck may feel less stable in crosswinds, especially if you've also installed larger, heavier tires.

These changes are manageable if you understand them and adjust your driving accordingly. Most lifted trucks are still safe on public roads when properly installed and maintained. However, a poorly installed lift or one that's not matched to your vehicle's suspension geometry can cause premature wear on tires, joints, and bearings, and can make your truck handle unpredictably.

Fuel economy typically drops after a lift, especially if you've also installed larger tires. The added weight and increased aerodynamic drag mean your engine works harder. Expect a 5 to 15 percent reduction in miles per gallon, depending on your driving habits and how aggressive your setup is.

Warranty, legal limits, and what to check before buying

Installing a lift kit may void your vehicle's factory warranty, particularly the suspension and drivetrain coverage. Check your warranty documents or call your dealer before purchasing. Some manufacturers are more lenient than others, and some dealers will honor warranty claims even after a lift if the failure is unrelated to the modification.

Your state may also have regulations on how high your vehicle can sit. Some states limit vehicle height to a certain number of inches above the manufacturer's specification, and some require that your headlights and taillights remain at legal heights. A few states require an inspection after a lift kit installation. Check your state's vehicle code or contact your local DMV to learn the rules in your area.

Before you buy, verify that BDS makes a kit for your specific vehicle year, make, and model. Suspension geometry varies between model years and body styles, and a kit designed for a 2019 truck may not fit a 2020 the same way. BDS publishes detailed fitment information on their website and through retailers.

Alternatives to a full lift kit

If you want more ground clearance but don't want the cost or complexity of a full lift kit, you have other options. A leveling kit is a smaller, cheaper modification that raises only your front end to match your rear, giving you a level stance without a dramatic height increase. Leveling kits typically cost $200 to $600 and take 2 to 4 hours to install.

You can also straightforward install larger tires on your stock suspension, though this limits your options. A 33-inch tire usually fits on a stock truck without modification, but anything larger may rub against your fenders or suspension components, especially when you turn or hit a bump.

If you're interested in off-road performance without a permanent lift, some owners use adjustable air suspension systems or coilover shocks that let you raise and lower your vehicle as needed. These are more expensive and more complex than a traditional lift kit, but they offer flexibility.

Frequently Asked Questions

Will a BDS lift kit fit my truck?

BDS makes kits for many popular truck and SUV models, but not all. Check BDS's website or contact a retailer with your vehicle's year, make, model, and engine size. Fitment varies by model year, so a kit for a 2020 truck may not work on a 2019.

Can I install a BDS lift kit myself?

You can if you have mechanical experience, the right tools, and a safe way to lift your vehicle. Most owners take their truck to a shop because the work requires precision and specialized equipment. A poor installation can damage your suspension and make your truck unsafe.

Do I need new tires after a lift kit?

Not necessarily. A 2-inch lift often works with your stock tires. Larger lifts (4 inches or more) usually pair with larger tires to fill the extra space and maintain your speedometer accuracy. Larger tires also improve ground clearance and off-road capability.

Will a lift kit hurt my truck's resale value?

It depends on the buyer. Some buyers prefer lifted trucks, while others see modifications as a red flag that the vehicle was driven hard. A quality BDS kit installed professionally is less likely to hurt value than a cheap or poorly installed lift. Keep your factory suspension parts if you remove them, in case a future owner wants to restore the truck to stock.

How often do I need to service my suspension after a lift?

Your suspension should be inspected more frequently after a lift, especially if you drive off-road. Check your shocks, springs, and joints every 10,000 to 15,000 miles for wear. Wheel alignments should be checked annually or whenever you notice uneven tire wear or steering drift.