Shock absorber replacement typically costs between $300 and $1,000 per axle for parts and labour combined, depending on your vehicle, which shocks you choose, and where you have the work done.

A single shock absorber usually runs $150 to $400 in parts alone. Labour to remove and install them is typically $150 to $300 per axle. If you replace both front shocks, expect to pay $300 to $800 total. Both rear shocks usually cost $300 to $800. Many shops recommend replacing shocks in pairs on the same axle — front pair or rear pair — because worn shocks on one side create uneven handling and uneven tyre wear.

The final bill depends on three things: what vehicle you drive, whether you choose original equipment (OE) shocks or aftermarket alternatives, and whether you go to a dealership, independent shop, or chain store. A Honda Civic shock replacement will cost less than a full-size truck or luxury sedan. A premium shock with adjustable damping costs more than a basic replacement. A dealership charges more labour per hour than a local independent shop.

Key Takeaways

  • Shock absorber parts alone range from $150 to $400 each, with labour adding $150 to $300 per axle on top of that.
  • Replacing both shocks on one axle at the same time prevents uneven handling and uneven tyre wear that happens when only one side is worn.
  • OE shocks from the dealership cost more than aftermarket shocks from independent shops or chain retailers, but may last longer on some vehicles.
  • The total cost varies significantly by vehicle make and model — luxury cars and trucks typically cost more to service than compact sedans.

Why shocks wear out and when replacement becomes necessary

Shocks absorb the energy from bumps and keep your tyres in contact with the road. Over time, the internal seals wear, the fluid inside leaks out, and the shock loses its ability to dampen motion. A worn shock lets your car bounce excessively after hitting a bump, dive forward under braking, and squat backward under acceleration. Your tyres wear unevenly because they are not staying flat against the road surface.

Most shocks last 50,000 to 100,000 kilometres, though some vehicles go longer and others wear them out faster depending on road conditions and driving style. Rough roads, potholes, and frequent hard braking accelerate wear. You will notice the problem when the car feels bouncy, when the front end dips sharply when you brake, or when you see uneven tyre wear across the tread. At that point, replacement is not optional — worn shocks reduce your ability to steer and brake effectively, especially on wet roads or during emergency manoeuvres.

OE shocks versus aftermarket alternatives and what the difference costs

Original equipment (OE) shocks are made by the same manufacturer that supplied your car when it was new. They are engineered specifically for your vehicle's weight, suspension geometry, and intended use. OE shocks typically cost $200 to $400 per unit and are usually available only through a dealership or specialist suppliers. They tend to last longer and maintain the car's original handling characteristics.

Aftermarket shocks are made by independent manufacturers like Monroe, KYB, Bilstein, and others. They cost $100 to $250 per unit and are available at chain stores, independent shops, and online retailers. Most aftermarket shocks are designed to meet or exceed OE specifications and work reliably, though some are engineered for specific purposes — a performance shock for spirited driving costs more than a basic replacement designed purely for comfort. The labour cost to install either type is usually the same, so the price difference comes down to the parts themselves.

For most vehicles, a quality aftermarket shock from a known brand performs adequately and costs significantly less. If your vehicle is still under warranty or if you want the assurance of OE engineering, the dealership route costs more but removes guesswork about compatibility.

Where to have shocks replaced and what each option costs

A dealership charges the highest labour rate — typically $100 to $200 per hour — but uses OE parts and technicians trained on your specific vehicle. The total bill for both front shocks at a dealership might be $600 to $1,000. You get warranty coverage on the work and the parts, usually for 12 months or a set kilometre limit.

An independent repair shop typically charges $60 to $120 per hour in labour and stocks both OE and aftermarket shocks. The same job costs $400 to $700. Independent shops often have longer-standing relationships with customers and may offer better pricing on repeat visits. Ask whether they warranty their work — most reputable shops offer at least 12 months on labour.

A chain store like Firestone, Goodyear, or a national tyre retailer charges $80 to $140 per hour in labour and usually stocks mid-range aftermarket shocks. The total for both front shocks typically runs $350 to $600. These stores often run promotions on suspension work and may bundle the shock replacement with a wheel alignment, which is worth doing anyway if your shocks are worn.

Additional costs and work that often comes with shock replacement

When shocks wear out, the mounts and bushings that hold them to the frame often wear too. A worn mount allows the shock to move side to side, which creates clunking noises and reduces the effectiveness of the new shock. Replacing mounts adds $50 to $150 per side in parts and labour. If your technician finds a worn mount during the job, ask for a quote before they proceed — it is not always necessary, but it is common enough that you should expect the possibility.

A wheel alignment is not required when you replace shocks, but it is strongly recommended. Worn shocks cause your tyres to wear unevenly, and the suspension geometry may have shifted slightly as the shocks failed. An alignment costs $100 to $200 and ensures your new shocks perform as designed and your tyres wear evenly going forward. Many shops offer alignment as part of a suspension package at a discount.

If your vehicle has electronic suspension or adaptive damping — common on luxury cars and some modern trucks — the diagnostic scan and calibration after shock replacement may add $100 to $300 to the bill. Ask about this before work begins if your vehicle has any suspension warning lights or electronic controls.

Signs that you need shock replacement soon

A bouncy ride after hitting a bump is the clearest sign. Push down hard on the front corner of your car and release. If the car bounces more than once or twice before settling, the shocks are worn. A properly functioning shock should compress and return to rest in one smooth motion.

Uneven tyre wear — the inner or outer edge of the tyre worn more than the centre — indicates worn shocks or suspension geometry problems. Inspect your tyres at the next service. Excessive nose-dive when braking hard, or the rear end squatting under hard acceleration, also points to worn shocks. A clunking noise from the suspension over bumps usually means the shock itself is failing or the mount is loose.

If you notice any of these signs, have the shocks inspected before they fail completely. Driving on severely worn shocks reduces your control in emergency braking or swerving manoeuvres, especially on wet roads. The cost of replacement now is far less than the cost of an accident or the cost of replacing tyres that wore out prematurely because of suspension problems.

How to reduce shock replacement costs

Replace shocks before they fail completely. Once a shock is leaking fluid visibly or the car is bouncing uncontrollably, you have no choice but to replace it when ready. If you catch the wear early — when the ride is just starting to feel softer than usual — you can schedule the work at your convenience rather than as an emergency, which gives you time to shop around for pricing.

Get quotes from at least two shops before committing. Call ahead and describe your vehicle and the work needed. Most shops will give you a rough estimate over the phone based on your make and model. The difference between a dealership and an independent shop can be $200 to $400 for the same job.

Ask whether the shop offers any promotions or package deals. Many retailers run seasonal sales on suspension work, and some offer discounts if you bundle the shock replacement with an alignment or other services. If you are handy and have the right tools, replacing shocks yourself is possible on some vehicles, but it requires a jack, jack stands, and knowledge of suspension geometry. Most people are better served paying a shop to do it correctly.

Frequently Asked Questions

Can I replace just one shock instead of both on the same axle?

Technically yes, but it is not recommended. A new shock on one side and a worn shock on the other creates uneven handling and uneven tyre wear. The car will feel unstable in turns and under braking. Replace both shocks on the same axle at the same time to maintain balanced suspension performance.

How long does a shock replacement take?

Replacing both shocks on one axle typically takes one to two hours at a shop. If the mounts need replacement or if the vehicle has complicated suspension geometry, the job may take longer. Ask the shop for an estimate when you drop the car off — most can tell you within 30 minutes whether the job will take one hour or three.

Will my warranty cover shock replacement?

Factory warranties on new cars typically cover suspension components for three years or 60,000 kilometres. If your shocks fail within that window, the dealership will replace them at no cost. Once the warranty expires, you pay the full cost. Aftermarket warranties from shops usually cover labour for 12 months but not parts wear.

Do I need new shocks if my car sits for a long time?

Shocks degrade from use and from time. If a car has been parked for several years, the seals inside the shocks may have dried out and the fluid may have leaked. Have the shocks inspected before driving the car regularly again. A bouncy test — pushing down on the corner and releasing — will tell you whether they still work.

What is the difference between shocks and struts?

Shocks are separate components that absorb bumps. Struts combine a shock absorber with a structural part of the suspension that also supports the car's weight. Many vehicles have shocks in the rear and struts in the front, or vice versa. Strut replacement costs more because the work is more involved, but the principle is the same — they wear out and need replacement when the ride becomes bouncy or handling suffers.