Daystar Suspension: Lift Kits and Leveling Components
Daystar Products International manufactures suspension lift kits, leveling kits, and related steering and suspension parts for trucks and SUVs. They make components that raise your vehicle's ride height, level out factory rake (the downward angle from front to rear), or adjust suspension geometry. Daystar parts are sold through retailers and installers nationwide, and you'll find them on vehicles ranging from full-size pickup trucks to Jeeps and crossovers.
Daystar is one of several manufacturers in the aftermarket suspension space — competitors include Rough Country, BDS Suspension, and ReadyLIFT. Their products fall into a few main categories: complete lift kits (which raise the entire vehicle), leveling kits (which raise the front to match the rear), spacer kits, and individual components like control arms and track bars. The company has been in business since the 1980s and holds patents on some suspension designs.
Key Takeaways
- Daystar makes lift kits, leveling kits, and suspension parts that raise your vehicle or adjust its stance, sold through retailers and professional installers.
- A leveling kit typically costs $300 to $800 installed, while a full lift kit ranges from $1,500 to $5,000 or more depending on lift height and vehicle model.
- Installation usually requires removing wheels, disconnecting suspension components, and adjusting steering geometry — a job most owners have done by a professional shop.
- Lifting or leveling changes how your vehicle handles, affects tire wear, and may require adjustments to your speedometer and headlight aim.
- Check your vehicle's manual and local regulations before installing any suspension modification, as some changes affect warranty coverage or inspection compliance.
Types of Daystar Suspension Products
Daystar's main product lines address different lifting goals. A leveling kit raises only the front of your truck to eliminate factory rake — the front-to-rear downward slope that comes standard on many pickup trucks. Leveling kits typically use spacers, struts, or torsion bar adjustments and cost less than a full lift because they don't raise the rear. They're popular on trucks where owners want a level stance without the expense or ride-quality changes of a complete lift.
A full lift kit raises both front and rear, usually by 2 to 6 inches depending on the model and kit. These kits replace or supplement springs, shocks, and control arms. Daystar offers kits for specific vehicle models — a kit for a 2020 Ford F-150 differs from one for a Jeep Wrangler. Full lifts cost more but give you the height increase and ground clearance that many truck owners want for off-road use or appearance.
Daystar also sells individual components: replacement control arms, track bars, sway bar links, and shock absorbers. These are often sold as part of a kit but can be purchased separately for repairs or upgrades. Some of their spacer kits are designed to work with factory suspension rather than replacing it entirely, which keeps costs down but limits lift height.
Installation and What to Expect
Installing a Daystar suspension kit is not a typical DIY job for most owners. The work involves removing wheels, disconnecting and removing factory suspension components, installing new springs or spacers, reconnecting control arms and steering linkage, and then aligning the vehicle. A professional shop with a lift and alignment equipment usually takes 4 to 8 hours for a leveling kit and 8 to 16 hours for a full lift, depending on the vehicle and kit complexity.
After installation, your vehicle will need a wheel alignment — this is not optional. Lifting changes the angles of your suspension geometry, and without realignment your tires will wear unevenly and steering may feel off. Some shops include alignment in the installation price; others charge separately, typically $150 to $300. You should also have your speedometer recalibrated if you've changed tire size, since a larger tire will make your speedometer read low.
Headlight aim often needs adjustment after a lift as well. Your headlights will point higher than before, which can blind oncoming drivers. Most shops will adjust this during or shortly after installation. Some states require this adjustment to pass inspection.
Cost Breakdown for Daystar Suspension Work
Leveling kit costs vary by vehicle but generally fall into this range: parts alone run $200 to $600, and professional installation adds $200 to $400. Total installed cost is typically $300 to $800. A full lift kit costs more — parts range from $800 to $3,000 or higher, and installation labor adds $500 to $2,000. Total installed cost for a full lift is often $1,500 to $5,000, though high-end kits for larger trucks can exceed this.
These figures do not include alignment ($150 to $300), headlight adjustment ($50 to $150), or any additional work like brake line extensions or driveshaft modifications that some lifts require. If you're changing tire size as part of the lift, add the cost of new tires and wheels. Get a written quote from your installer that lists parts, labor, and any additional services before you commit.
How Lifting Affects Your Vehicle's Performance and Handling
Raising your vehicle changes how it drives. The higher center of gravity makes the vehicle more prone to body roll in turns — you'll feel more lean when cornering at speed. Braking distance may increase slightly because weight is distributed differently. Off-road capability often improves because you gain ground clearance and approach/departure angles, but on-road handling becomes less precise.
Tire wear patterns change after a lift. Even with proper alignment, lifted vehicles often experience accelerated wear on the outer edges of tires because suspension geometry is altered. Rotating tires every 5,000 to 7,000 miles helps, but expect to replace tires sooner than on a stock vehicle. Fuel economy may decrease slightly due to increased aerodynamic drag from the higher stance.
Ride quality depends on the kit. A leveling kit with quality shocks often feels similar to stock suspension. A full lift with aftermarket shocks can feel softer or firmer than factory, depending on the shock valving. Some owners report a rougher ride over bumps; others prefer the feel. Test drive a lifted vehicle similar to yours before committing if ride quality matters to you.
Warranty and Inspection Considerations
Installing any aftermarket suspension component may void or limit your vehicle's factory warranty. Check your owner's manual or contact your dealer before installation. Some dealers will honor warranty coverage on unrelated systems (engine, transmission, electronics) even after a suspension lift, while others take a stricter stance. Document what was installed and when, in case a warranty dispute arises later.
Suspension modifications can affect vehicle inspection compliance depending on your state. Some states have rules about maximum lift height, tire size relative to fender clearance, or headlight aim. A few states require that lifted vehicles pass additional inspection steps. Before you install, check your state's vehicle inspection requirements or ask your installer whether the kit meets local standards.
Insurance companies should be notified of major suspension changes. While a lift kit alone rarely affects your premium, it's worth a call to your agent to confirm coverage. Some policies have clauses about vehicle modifications, and transparency protects you if a claim arises.
Choosing Between Daystar and Other Suspension Brands
Daystar competes with several established suspension manufacturers. Rough Country is known for budget-friendly kits and wide vehicle compatibility. BDS Suspension focuses on higher-end kits with premium shocks and components. ReadyLIFT specializes in leveling and mild lift kits. Bilstein and Fox make performance-oriented shocks often paired with lift kits from other brands.
Daystar kits are generally mid-range in price and quality — not the cheapest option but not premium either. They're widely available and have a track record of reliability. The best choice depends on your vehicle, budget, intended use (daily driving versus off-road), and how much lift height you want. Read reviews specific to your vehicle model, and ask your installer which kits they recommend and have experience installing.
Frequently Asked Questions
Will a Daystar lift kit affect my truck's towing capacity?
Lifting alone doesn't change your truck's rated towing capacity, but it can affect how the truck handles while towing. A higher center of gravity increases body sway when towing, and some owners feel less stable. Check your truck's manual for any manufacturer guidance on suspension modifications and towing. Your installer can advise whether the specific kit you're considering has known towing issues.
Can I install a Daystar kit myself if I have basic mechanical skills?
Most Daystar kits require specialized tools (spring compressors, alignment racks) and knowledge that go beyond basic maintenance. Improper installation can damage suspension components or create safety issues. Unless you have professional-level experience and the right equipment, have it installed by a shop. The labor cost is worth the assurance that it's done correctly.
How long do Daystar suspension components last?
Quality aftermarket suspension parts typically last 50,000 to 100,000 miles or more, similar to factory components. Shocks wear faster than springs and may need replacement every 40,000 to 60,000 miles depending on driving conditions. Off-road use accelerates wear. Regular maintenance — checking for loose bolts, inspecting shocks for leaks, and rotating tires — extends component life.
Do I need to replace my shocks when I install a Daystar lift kit?
Many Daystar kits include shocks rated for the new ride height, so they come together. If you're using a spacer kit with factory shocks, your factory shocks may not handle the new height well and could wear out faster. Ask your installer whether your factory shocks are adequate for the kit you're installing, or budget for replacement shocks as part of the project.
Will a leveling kit hurt my truck's resale value?
Resale impact depends on the buyer. Some truck buyers view a quality leveling kit as a desirable upgrade; others prefer stock suspension. A well-installed kit with documentation usually doesn't hurt value, but it won't add value either. If you plan to sell, keep records of what was installed and when, and be transparent about any modifications when listing the vehicle.