DJM suspension is an aftermarket suspension system designed to lift and modify how your vehicle handles
DJM stands for Djm Suspension, a manufacturer that specializes in suspension kits for trucks and SUVs—primarily Chevrolet, GMC, and Ford models. Their kits raise the ride height of your vehicle and alter the geometry of the suspension to accommodate larger tires, improve ground clearance, and change the way the vehicle sits and drives. Unlike factory suspension, which is engineered as a complete system by the vehicle manufacturer, DJM kits are bolt-on modifications that replace or supplement your existing components.
A DJM suspension kit typically includes new springs, shocks, control arms, and sometimes track bars or other linkage parts. The goal is to lift the vehicle while maintaining drivability and, ideally, keeping the suspension geometry as close to stock as possible. This matters because suspension geometry—the angles and positions of the wheels relative to the frame—directly affects how your vehicle steers, how the tires wear, and how the vehicle handles bumps and turns.
Key Takeaways
- DJM suspension kits raise your vehicle's ride height and are designed primarily for Chevrolet, GMC, and Ford trucks and SUVs.
- A complete kit includes springs, shocks, and control arms, and installation requires removing and replacing multiple suspension components.
- Lifting your suspension changes how your vehicle handles, steers, and wears its tires, so the quality of the kit and installation directly affects safety and reliability.
- DJM kits are more expensive than budget lift kits but are engineered to preserve suspension geometry better than cheaper alternatives.
- After installation, your vehicle will need a wheel alignment and may require adjustments to your speedometer and brake lines.
What components are in a DJM suspension kit
A typical DJM kit includes coil springs (which support the weight of the vehicle), new shocks or struts (which dampen the motion of the springs), and replacement control arms or track bars. The exact contents depend on the vehicle model and the amount of lift. A 2-inch lift is different from a 4-inch or 6-inch lift, and each requires different spring rates and shock valving to work correctly.
The springs in a DJM kit are stiffer than stock springs because they must support the vehicle at a higher ride height while still absorbing bumps. The shocks are also valved differently—they are tuned to work with the new spring rates and the changed suspension geometry. If you mix components from different manufacturers or use shocks that are not matched to your springs, the suspension will not perform as intended, and you may experience poor handling, excessive bouncing, or premature wear on tires and suspension parts.
Some DJM kits also include new sway bar links, which connect the sway bar to the suspension and help control body roll during turns. When you lift a vehicle, the angles of these links change, and stock links may not work correctly at the new height. A complete kit accounts for this.
How installation affects your vehicle's performance and safety
Installation of a DJM suspension kit is not a straightforward bolt-on job. The work requires removing the wheels, disconnecting the brake lines and ABS sensors, unbolting the control arms and shocks, and then installing the new components in the correct order. If any step is done incorrectly—if a bolt is not torqued to the right specification, if a sensor is not reconnected, or if the suspension is not aligned properly—your vehicle will not handle correctly and safety is compromised.
After installation, your vehicle must be taken to an alignment shop for a four-wheel alignment. This is not optional. Lifting the suspension changes the angles of the wheels relative to the frame, and if those angles are not corrected, your tires will wear unevenly and rapidly, your vehicle will pull to one side, and your steering will feel loose or unpredictable. A proper alignment ensures that the wheels are parallel to each other and perpendicular to the ground, which is essential for safe handling and tire life.
The quality of the installation shop matters as much as the quality of the kit. A shop that has experience with DJM kits and understands suspension geometry will install the kit correctly and perform the alignment properly. A shop that treats it as a routine job may miss details that affect how your vehicle drives.
Cost and what you should expect to pay
DJM suspension kits vary in price depending on the vehicle model and the amount of lift. A 2-inch kit for a common truck model typically costs between $800 and $1,500 for the parts alone. A 4-inch or 6-inch kit can cost $1,500 to $3,000 or more. Installation labor typically ranges from $1,000 to $2,000, depending on the complexity and the shop's hourly rate. A four-wheel alignment after installation usually costs $150 to $300.
Budget lift kits from other manufacturers may cost less upfront, but they often use lower-quality springs and shocks, do not preserve suspension geometry as well, and may require additional modifications or repairs sooner. DJM kits are engineered to work as a system, which means you are paying for engineering and testing, not just parts. Over the life of the vehicle, a quality kit often costs less in repairs and tire wear than a cheap alternative.
How lifting your suspension affects tires, brakes, and other systems
When you lift your vehicle, you can fit larger tires—which is often the reason people choose to lift in the first place. However, larger tires change your vehicle's speedometer reading, affect fuel economy, and alter how the engine and transmission perform. A tire that is one size larger than stock will cause your speedometer to read slower than your actual speed, which can affect your fuel economy calculations and may cause issues with cruise control or transmission shift points.
Lifting also affects your brake system. The brake lines, which run from the master cylinder to the wheels, may need to be extended or rerouted to accommodate the new suspension geometry. If this is not done correctly, the brakes may not work properly or may fail. A quality installation shop will address this as part of the job.
Your vehicle's center of gravity also changes when you lift it. A higher center of gravity means the vehicle is more prone to rolling in sharp turns or on uneven terrain. This is a real safety concern, especially if you are towing or carrying heavy loads. DJM kits are designed to minimize this effect, but it is still a factor to understand.
DJM suspension versus other lift kit brands
DJM is one of several manufacturers of suspension lift kits. Other brands include BDS Suspension, Rough Country, and Rancho. DJM is generally considered a mid-to-premium option—more expensive than budget brands like Rough Country, but less expensive than ultra-premium brands like Icon or Fox. The difference is in engineering, materials, and testing. DJM kits use higher-quality springs and shocks, and they are designed to preserve suspension geometry better than cheaper alternatives.
If you are comparing kits, look at what components are included, what the warranty covers, and what other owners of the same vehicle say about the kit's performance and durability. A kit that is cheaper but requires additional modifications or causes problems down the road is not a bargain. Read reviews from owners who have the same vehicle and have had the kit installed for at least a year.
What to do before and after installation
Before you have a DJM kit installed, inspect your current suspension for wear or damage. If your shocks are leaking, your springs are sagging, or your control arms are bent, address those issues first. Installing a new lift kit on a worn-out suspension is like putting new tires on a vehicle with bad alignment—you are wasting money and creating safety problems.
After installation, have the alignment done when ready. Do not drive the vehicle long distances before the alignment is complete. After the first 500 miles, have the shop re-check the alignment and torque all suspension bolts to make sure nothing has shifted. Some shops include this as part of the installation; others charge extra. Ask before you commit to the work.
Keep records of the installation and any follow-up work. If you ever need to warranty a component or if you sell the vehicle, documentation of proper installation and maintenance is valuable.
Frequently Asked Questions
Will a DJM suspension kit void my vehicle's warranty?
It may. Most vehicle manufacturers consider suspension modifications to be outside the scope of the factory warranty, and they may refuse to cover suspension-related repairs if they determine that the modification caused the problem. Check your warranty documentation and contact your dealer before installation. Some dealers are more lenient than others, and some modifications are less likely to trigger warranty issues than others.
Can I install a DJM kit myself?
If you have suspension experience and the right tools, you can, but it is not recommended for most owners. Suspension work requires precision, and mistakes can affect how your vehicle handles and brakes. A professional shop has the equipment to do the alignment correctly and can warranty the work. The labor cost is worth the safety and reliability you gain.
How long does a DJM suspension kit last?
With proper maintenance and installation, a DJM kit should last as long as the vehicle. The shocks will eventually wear out—typically between 50,000 and 100,000 miles—and may need to be replaced. Springs can last longer, but they can sag over time, especially if the vehicle is heavily loaded regularly. Regular inspections will tell you when components need attention.
Will lifting my vehicle affect fuel economy?
Yes, usually negatively. A lifted vehicle has a higher center of gravity and more wind resistance, both of which increase fuel consumption. Larger tires also increase rolling resistance. You should expect fuel economy to drop by 10 to 20 percent, depending on the amount of lift and the size of the tires you choose.
Do I need to adjust my speedometer after lifting?
If you install larger tires, yes. Your speedometer is calibrated to your stock tire size, and larger tires will cause it to read slower than your actual speed. Some shops can reprogram your vehicle's computer to correct this; others cannot. Ask your installation shop what options are available for your specific vehicle.