FTS suspension lifts raise your vehicle's ride height by replacing or modifying the springs and shocks that support the frame
FTS stands for "Full Traction Suspension" or similar brand-specific names depending on the manufacturer. An FTS lift works by installing taller springs, longer shocks, or both, which increases the distance between your frame and the ground. The result is higher ground clearance — typically 2 to 6 inches depending on the kit — which lets you fit larger tires, navigate rough terrain more easily, and clear obstacles that would otherwise catch your undercarriage.
Unlike body lifts, which only raise the body away from the frame without changing suspension geometry, an FTS lift actually modifies the suspension system itself. This means the change affects how your vehicle handles, rides, and wears its tires. It also means installation is more involved and the cost is higher, but the ride quality and handling characteristics are usually better than a body lift alone.
Key Takeaways
- FTS lifts increase ground clearance by modifying springs and shocks, allowing larger tires and better obstacle clearance than stock suspension.
- A full suspension lift costs between $1,500 and $5,000 installed, depending on lift height and vehicle type, plus the cost of new tires.
- Lifting your vehicle changes steering geometry, ride comfort, and fuel economy, and may affect warranty coverage on suspension components.
- Installation requires removing wheels, disconnecting the suspension, and often realigning the steering — work that takes a shop several hours to a full day.
- Aftermarket FTS kits are vehicle-specific, so you must match the kit to your exact make, model, and year to avoid fitment problems.
How FTS suspension lifts change your vehicle's geometry
When you raise the suspension, you change the angles at which your steering and suspension components sit relative to the ground. The most noticeable change is caster angle — the forward or backward tilt of your steering axis. A lift that is not properly designed or installed can increase caster too much, making the steering wheel pull to one side or feel heavy at low speeds.
The lift also affects camber (the tilt of the wheel itself) and toe (whether the wheels point straight ahead or inward/outward). These changes happen because the suspension arms and tie rods are now at different angles than the engineers intended. A quality FTS kit accounts for this by including longer control arms, adjustable track bars, or both. A cheap lift that only swaps springs and shocks will leave these angles wrong, causing uneven tire wear and poor handling.
After installation, you must have a four-wheel alignment performed. This is not optional — it is the only way to restore proper steering geometry and prevent your tires from wearing out in weeks. Budget $150 to $300 for alignment at a shop that has experience with lifted vehicles.
Cost breakdown: lift kit, installation, and tires
The FTS suspension kit itself typically costs $800 to $2,500 depending on lift height and brand. A 2-inch lift is usually cheaper than a 4-inch or 6-inch lift because it requires less modification to the suspension geometry. Popular brands like Rough Country, BDS, and Icon offer kits across this range, though pricing varies by vehicle platform.
Installation labor runs $400 to $1,500 at a shop, depending on how much work the kit requires. A straightforward coil spring swap might take 4 hours; a full kit with control arms and track bar adjustments can take 8 to 12 hours. Some shops charge hourly rates ($100 to $150 per hour), while others quote a flat rate for the job. Always get a written estimate before work begins.
Do not forget tires. A lift that raises your vehicle 3 inches or more will not fit your stock wheels and tires — the new tires will rub against the fenders or suspension components. New tires and wheels for a lifted truck or SUV typically cost $1,200 to $3,000 depending on size and quality. This is often the largest single expense after the lift itself.
| Cost Category | Low End | High End |
|---|---|---|
| FTS suspension kit | $800 | $2,500 |
| Installation labor | $400 | $1,500 |
| Alignment | $150 | $300 |
| Tires and wheels | $1,200 | $3,000 |
| Total | $2,550 | $7,300 |
How a lift affects ride quality, handling, and fuel economy
A well-designed FTS lift with quality shocks can actually improve ride quality on rough terrain because the longer suspension travel lets the wheels move up and down more before the frame bottoms out. However, a cheap lift with weak shocks will feel bouncy and unstable, especially when cornering or braking.
Handling changes noticeably. Your vehicle's center of gravity is now higher, which means it leans more in turns and feels less stable at highway speeds. The steering may feel heavier or less responsive depending on the lift design. These changes are usually manageable for daily driving, but they become obvious if you drive aggressively or tow a trailer.
Fuel economy typically drops 1 to 3 miles per gallon after a lift, mainly because larger tires have more rolling resistance and the higher center of gravity makes the engine work harder to accelerate. The exact loss depends on tire size, driving habits, and how much weight you add to the vehicle.
Warranty and insurance implications
Installing a suspension lift will void the manufacturer's warranty on suspension components — springs, shocks, control arms, and anything connected to them. Some dealers will still cover unrelated systems like the engine or transmission, but do not count on it. Read your warranty documents or call your dealer before installation to understand what you are giving up.
Insurance companies usually do not care about a suspension lift as long as you disclose it when you renew your policy. Some insurers may charge a small premium increase because the vehicle is now modified. A few insurers will not cover collision damage to suspension components if they determine the lift contributed to the damage, so mention the lift to your agent in writing and ask them to confirm coverage in writing.
Choosing between a 2-inch, 4-inch, and 6-inch lift
A 2-inch lift is the entry point. It costs less, requires fewer modifications to suspension geometry, and is easier to install. You can usually fit tires one size larger than stock without major fender modifications. The ride quality and handling changes are minimal. This is the right choice if you want modest ground clearance for light off-road use or just want your vehicle to sit taller.
A 4-inch lift is the middle ground. It requires a more complete kit with longer control arms or track bar adjustments, costs more, and takes longer to install. You can fit significantly larger tires, and the vehicle looks noticeably taller. Ride quality and handling changes are more pronounced. Choose this if you plan regular off-road use or want to fit 33-inch or larger tires.
A 6-inch lift or higher is for serious off-road vehicles. It requires extensive suspension modifications, costs $3,000 to $5,000 for the kit alone, and may require custom fabrication. The ride on pavement becomes noticeably rougher, and handling is compromised. Only choose this if you spend significant time on trails or need maximum ground clearance for extreme terrain.
What to look for in an FTS kit and installer
A quality FTS kit includes not just springs and shocks, but also longer control arms, adjustable track bars, and sometimes extended brake lines and driveshaft modifications. Cheap kits skip these components and rely on the springs and shocks alone, which leaves your suspension geometry wrong and your vehicle unstable.
Check whether the kit is designed for your specific vehicle. A lift kit for a 2020 Ford F-150 will not fit a 2019 F-150 properly, even though the trucks look similar. Manufacturers change suspension geometry year to year, so the fit matters. Buy a kit that explicitly lists your year, make, and model.
Find an installer with experience lifting your vehicle type. A shop that specializes in lifted trucks will know which kits work well, which ones have common problems, and how to avoid fitment issues. Ask for references and look at photos of other lifted vehicles the shop has done. A good installer will also recommend a reputable alignment shop and may even coordinate the alignment for you.
Frequently Asked Questions
Will a suspension lift affect my vehicle's towing capacity?
A suspension lift itself does not change your vehicle's towing capacity, which is determined by the engine, transmission, and frame. However, the higher center of gravity and softer suspension geometry can make towing feel less stable, especially in crosswinds or when braking hard. If you tow regularly, choose a lift kit designed for towing and pair it with quality shocks rated for the load.
Can I install a suspension lift myself?
If you have suspension experience and the right tools, a 2-inch coil spring swap is possible at home. Anything more complex — control arm replacement, track bar adjustment, or longer shocks — requires a lift and specialized alignment equipment. Most people should have this done at a shop to avoid safety issues and may support proper geometry.
Do I need to replace my shocks when I lift my vehicle?
Yes. Stock shocks are designed for stock suspension height and travel. A lifted suspension compresses and extends more, which stock shocks cannot handle properly. They will wear out quickly and provide poor ride quality. A quality FTS kit includes shocks rated for the new suspension geometry and travel range.
What happens to my vehicle's warranty when I install a lift?
The manufacturer's warranty on suspension components is void after a lift. Coverage on other systems depends on your dealer and warranty terms. Contact your dealer in writing before installation to ask which systems remain covered, and keep records of the lift installation in case you need to prove the lift did not cause an unrelated failure.
How long does a suspension lift installation take?
A straightforward 2-inch coil spring lift takes 4 to 6 hours. A full 4-inch kit with control arms and track bar adjustments takes 8 to 12 hours. Most shops can complete the work in one day, though some may need two days if they also perform the alignment. Ask your installer for a timeline before you drop off the vehicle.