What Kelderman Suspension Is
Kelderman Suspension is an aftermarket suspension system made by Kelderman Air Suspension, a company based in Iowa that specializes in air suspension components for trucks and commercial vehicles. Their systems replace or modify your vehicle's factory suspension to use compressed air instead of traditional springs, allowing you to raise, lower, or level your vehicle on demand.
Kelderman systems are most common on pickup trucks, particularly Dodge Ram, Ford F-Series, and Chevy Silverado models. The company also makes suspension products for travel trailers and motorhomes. Unlike bolt-on lowering kits or lift kits that permanently change your ride height, a Kelderman air suspension lets you adjust height while driving or parked, which is useful if you tow, haul heavy loads, or want to change your truck's stance for different purposes.
Key Takeaways
- Kelderman air suspension systems use compressed air to adjust your vehicle's ride height, which you can change while driving or parked using a control switch or app.
- These systems are designed primarily for trucks that tow or carry heavy loads, because they help level the vehicle when weight is added or removed.
- Installation requires removing your factory suspension components and replacing them with Kelderman air springs, shocks, and an onboard compressor, which typically takes a shop several hours to a full day.
- Kelderman suspension affects your vehicle's handling, braking, and alignment, so you may need to have your suspension geometry checked and adjusted after installation.
- Maintenance includes checking air pressure, inspecting air lines and fittings for leaks, and replacing air springs or compressor components if they fail.
How the System Works
A Kelderman air suspension replaces your factory coil springs or leaf springs with air springs — flexible rubber and fabric chambers that inflate with compressed air. An onboard compressor, usually mounted under the truck bed or in the engine bay, pressurizes the system. A control module and height sensors monitor your vehicle's position and automatically adjust air pressure to maintain the ride height you select.
You control the system using a dashboard switch, a wireless remote, or a smartphone app, depending on which Kelderman kit you buy. When you press the button to raise the vehicle, the compressor fills the air springs with more pressure, lifting the chassis. When you lower it, a solenoid valve vents air from the springs, dropping the ride height. The whole process usually takes 10 to 30 seconds per adjustment.
The system also includes upgraded shocks that work with the air springs to control how the suspension moves and absorbs bumps. Without proper shocks, air suspension alone would bounce excessively. Kelderman kits pair their air springs with monotube or twin-tube shocks tuned for air suspension use.
Why Truck Owners Install Kelderman Suspension
The main reason people choose Kelderman suspension is to keep their truck level when towing or hauling. When you load a truck bed with weight or hook up a heavy trailer, the rear suspension compresses and the truck squats — the back end drops while the front stays high. This changes your headlight aim, makes braking less effective, and can damage suspension components. A Kelderman system automatically raises the rear to compensate, keeping the truck level and maintaining proper brake balance and lighting geometry.
A secondary reason is convenience and appearance. Some owners like being able to lower their truck for easier loading or to change how it looks, then raise it for highway driving or towing. Lowering also reduces wind resistance and fuel consumption on long highway trips. Raising the truck increases ground clearance for rough terrain or deep snow.
Kelderman suspension can also extend the life of your factory suspension components by reducing the stress of repeated heavy loading. Instead of your springs compressing fully every time you load the truck, the air system adjusts to keep stress more even across the range of loads you carry.
Installation and What Changes on Your Vehicle
Installing a Kelderman system is not a bolt-on job. A shop must remove your factory suspension — springs, shocks, and sometimes control arms — and replace them with Kelderman components. The compressor mounts in the engine bay or under the truck, air lines run to each wheel, and the control module installs in the cab or under the dash. Installation typically takes 4 to 8 hours depending on your truck model and whether the shop has done Kelderman installs before.
After installation, your truck's suspension geometry changes. The ride height, spring rate, and shock valving are all different from factory. This means your wheel alignment — camber, caster, and toe — will be out of spec. You must have a shop perform a four-wheel alignment after installation to may support your tires wear evenly and your steering feels correct. Some shops include this in the installation price; others charge separately.
Your braking system may also need adjustment. If the truck's ride height changes significantly, the brake proportioning valve — which balances brake pressure between front and rear — may need recalibration. Ask the installer whether your truck requires this.
Maintenance and Common Issues
Kelderman air suspension requires more maintenance than factory suspension. You should check air pressure in the system periodically, usually every few months, because small leaks in air lines or fittings can cause the system to lose pressure over time. If pressure drops, the compressor runs more often to maintain height, which uses more electrical power and can shorten compressor life.
Air springs themselves are durable but not permanent. The rubber and fabric can crack or separate after 80,000 to 150,000 miles, depending on use and climate. A failed air spring will cause the truck to sag on that corner and trigger a warning light. Replacement springs cost $300 to $600 per corner plus labor.
The compressor can also fail. Compressors typically last 100,000 to 200,000 miles but can fail sooner if the system loses pressure frequently or if the compressor runs continuously. Replacement compressors cost $400 to $1,000 plus installation labor. Solenoid valves, which control air flow, can stick or fail and cost $150 to $400 to replace.
Electrical issues are common because the system relies on switches, sensors, and a control module. Corroded connectors, damaged wiring, or a failed module can disable the system. These repairs typically cost $200 to $800 depending on what failed.
Cost and Warranty Considerations
A complete Kelderman suspension kit for a pickup truck costs between $2,500 and $5,000 before installation. Installation labor adds $800 to $1,500. Alignment and any brake adjustments add another $200 to $400. Total out-of-pocket is typically $3,500 to $6,900 depending on your truck and local labor rates.
Kelderman offers a limited warranty on their components, usually covering defects in materials and workmanship for one to three years or a certain mileage limit. The warranty typically does not cover wear items like air springs or compressors after a certain age or mileage, and it may not cover damage from improper installation or maintenance. Read the warranty document carefully and ask the installer what is and is not covered before you commit.
Your vehicle's factory warranty may be affected. Some manufacturers void suspension-related warranty coverage if you modify the suspension. Check your owner's manual or call your dealer to understand what coverage you lose by installing aftermarket suspension.
Alternatives to Kelderman Suspension
If you tow or haul occasionally but do not want the complexity of air suspension, a load-leveling kit is simpler and cheaper. These are passive systems that use stiffer springs or helper springs to reduce squat when loaded. They do not adjust automatically and do not require electricity or maintenance, but they also do not let you raise or lower the truck on demand.
A traditional lift kit raises your truck permanently and costs $1,000 to $3,000 installed. It improves ground clearance and off-road capability but does not adjust for load and may make the truck ride harshly when empty.
A lowering kit lowers your truck permanently for appearance or aerodynamics. These range from $500 to $2,500 installed but offer no load-leveling benefit.
If you tow frequently and want automatic load leveling without air suspension, some newer trucks offer factory air suspension or electronic load-leveling systems. These are built into the truck from the factory and are covered by the manufacturer's warranty, though they are more expensive upfront.
Frequently Asked Questions
Can I install Kelderman suspension myself?
Not unless you have significant suspension experience and the right tools. The system requires removing and replacing suspension components, routing air lines, installing electrical connections, and programming the control module. A mistake can affect braking, handling, and safety. Have a shop with Kelderman experience do the work.
Will Kelderman suspension hurt my truck's fuel economy?
Slightly. The compressor uses engine power to pressurize the system, which increases fuel consumption by 1 to 3 percent. However, if you lower the truck on the highway to reduce wind resistance, you may recover some of that loss. The net effect depends on how often you adjust height.
Does Kelderman suspension work in cold weather?
Yes, but air pressure changes with temperature. Cold air is denser and exerts less pressure, so your truck may sit lower in winter than summer. The system compensates automatically, but you may notice the compressor running more often in very cold weather. Some Kelderman kits include heated air lines to prevent moisture from freezing inside the system.
What happens if the compressor fails while I'm driving?
The truck will gradually settle to a lower ride height as air pressure drops. You can still drive, but the suspension will be softer and the truck lower. Do not ignore a failed compressor — continued driving without proper air pressure can damage the air springs and shocks. Have it repaired as soon as possible.
Can I use Kelderman suspension for off-roading?
Yes, many off-road truck owners use Kelderman systems to raise their trucks for ground clearance and to adjust height as terrain changes. However, air suspension is more complex than traditional suspension and has more potential failure points in harsh conditions. Make sure you carry a spare compressor fuse and know how to manually lower the truck if the system fails.