What King's Suspension Does
King's Suspension is a manufacturer of off-road and performance suspension components, not a suspension type itself. The company makes shocks, coilovers, control arms, and other parts that replace or upgrade a vehicle's factory suspension. You'll find King's products on trucks, Jeeps, and other vehicles built for rough terrain or high-performance driving.
King's is known for their remote-reservoir shocks — shocks with a separate canister that holds extra fluid and helps with heat management during hard use. These are common on rock crawlers, desert racers, and lifted trucks. The company also makes complete suspension kits that work together as a system, rather than individual parts you mix and match.
If you're reading about King's Suspension, you're likely looking at either upgrading an existing vehicle or understanding what's already on one you own or are considering buying. The next sections cover what these systems cost, how they perform, and what to know before installing them.
Key Takeaways
- King's Suspension makes aftermarket shocks and suspension parts, most commonly found on lifted trucks and off-road vehicles.
- Remote-reservoir shocks from King's cost more upfront than factory shocks but handle heat and repeated impacts better during off-road use.
- Installation requires removing your vehicle's factory suspension and often needs alignment afterward, which adds labor cost to the parts price.
- King's parts are designed for specific vehicle models, so you need to match the correct kit or shock to your truck's year, make, and model.
- Warranty coverage varies by product line and retailer, so confirm what's covered before purchase.
Remote-Reservoir Shocks and How They Differ from Factory Shocks
Factory shocks on most trucks are monotube or twin-tube designs with the fluid sealed inside a single cylinder. They work fine for street driving but heat up quickly under repeated impacts — like bouncing over rocks or landing hard jumps. Once they overheat, they lose pressure and stop absorbing bumps as well.
King's remote-reservoir shocks have a separate canister connected by a hose. That extra space holds more fluid, which absorbs and dissipates heat. The shock can keep working harder for longer without fading. This matters most if you're rock crawling, racing in the desert, or driving rough trails regularly. For street driving or light off-road use, the heat advantage is less critical.
Remote-reservoir shocks also allow for more tuning. King's offers different valving options — the internal setup that controls how stiff or soft the shock feels — so you can choose one matched to your driving style and terrain. Factory shocks come as-is with no adjustment.
Installation, Alignment, and Labor Costs
King's suspension parts don't bolt onto your vehicle the way a new battery does. Installation means removing your factory suspension — shocks, springs, control arms, or all of the above depending on the kit — and bolting in the King's components in their place. This is a job for a shop with suspension experience, not a DIY task for most owners.
Labor time varies widely. A shock replacement on one axle might take two to four hours. A full suspension overhaul — springs, shocks, control arms, and bushings — can take a full day or more. Shop rates range from $100 to $200 per hour depending on location and the shop's reputation, so labor can easily match or exceed the parts cost.
After installation, your vehicle needs a wheel alignment. The new suspension geometry changes the angles of your wheels, and driving out of alignment wears tires fast and makes the vehicle pull to one side. Budget $150 to $300 for alignment at a shop that has done suspension work before.
Matching King's Parts to Your Vehicle
King's makes suspension kits for specific vehicles. A kit for a 2010–2014 Ford F-150 won't fit a Chevy Silverado or a Jeep Wrangler. Even within one model line, the year matters — a 2015 F-150 has a different frame and suspension geometry than a 2014, so the parts differ.
Before buying, confirm the exact year, make, model, and generation of your vehicle. Check your vehicle's title or registration if you're unsure. Then verify that the King's kit or shock you're looking at lists your vehicle as compatible. Retailers and King's own website have fitment charts, but double-check with the shop that will install it — they've seen fitment problems before and can catch mistakes.
Some King's products come as individual shocks or springs, not complete kits. If you're replacing only the shocks, make sure the rest of your suspension — springs, control arms, bushings — is in good condition. Mixing old and new parts can create handling problems or uneven wear.
Cost Range for King's Suspension Systems
A pair of King's remote-reservoir shocks for one axle typically costs $800 to $1,500 per shock, depending on the model and valving. A full four-shock kit for a truck runs $3,000 to $6,000 in parts alone. Complete suspension kits that include springs, control arms, and shocks can reach $8,000 to $15,000 or more.
Labor and alignment add $500 to $2,000 on top of parts, depending on what's being replaced and your location. A full suspension overhaul at a reputable shop can total $10,000 to $20,000 when you add everything together.
These are not budget upgrades. King's products are built for serious off-road use and performance driving, and the price reflects that. If you're doing light trail driving or street use, less expensive suspension options exist. If you're racing or rock crawling regularly, the durability and performance of King's shocks often justify the cost over time.
Warranty and Support
King's offers a limited lifetime warranty on most shocks and suspension components, covering defects in materials and workmanship. The warranty transfers to a second owner if you sell the vehicle, which can add resale value. However, the warranty does not cover wear from normal use, damage from impacts, or problems caused by incorrect installation.
Warranty claims go through the retailer or shop where you bought the part, not directly to King's. Keep your receipt and installation paperwork. If a shock fails, the retailer will handle the return and replacement process.
King's also has a reputation for customer support — they respond to questions from owners and shops about fitment, tuning, and troubleshooting. If you have a problem after installation, reaching out to King's directly (through their website or phone) often gets you a faster answer than waiting for a shop callback.
When King's Suspension Makes Sense
King's Suspension is the right choice if you're building a vehicle for serious off-road use, desert racing, or rock crawling. The remote-reservoir design and tuning options are built for those demands. If you're lifting a truck for looks or light trail driving, a less expensive suspension brand may serve you just as well.
King's also makes sense if you plan to keep the vehicle long-term and use it hard. The upfront cost is high, but the durability means you're not replacing shocks every few years. If you're buying a used truck that already has King's suspension installed, you're getting a vehicle that's been built for real use — which is valuable information about how the previous owner treated it.
Before committing, talk to shops in your area that install King's products. They can tell you what they see fail, what holds up, and whether King's is the right fit for your specific vehicle and driving plans. A good shop will also suggest alternatives if King's is overkill for what you're actually doing.
Frequently Asked Questions
Can I install King's shocks myself?
Removing and installing shocks requires lifting the vehicle safely, removing wheels, and disconnecting brake lines or other components depending on the design. If you have suspension experience and the right tools, you might handle it. Most owners should have a shop do the work to avoid safety issues and may support proper installation.
Do I need to replace springs and control arms at the same time as shocks?
Not always. If your springs and control arms are in good condition, you can replace just the shocks. However, if you're doing a full suspension overhaul or if other parts are worn, replacing everything together ensures the system works as designed and handles evenly.
What's the difference between King's 2.5 and 3.0 shocks?
The numbers refer to the shock's internal diameter and piston size, which affect how much fluid they can move and how they respond to impacts. A 3.0 is generally stiffer and better for heavier vehicles or more aggressive terrain. Your vehicle's weight and intended use determine which is right for you — the shop installing them can recommend the correct size.
Will King's suspension hurt my fuel economy?
Suspension upgrades themselves don't burn more fuel. However, if you're lifting the vehicle or changing tire size at the same time, those changes can reduce fuel economy. A lifted truck with larger tires will get fewer miles per gallon than the stock version, but the suspension itself isn't the cause.
How often do King's shocks need maintenance?
Remote-reservoir shocks don't require routine maintenance like oil changes. However, you should inspect them visually for leaks or damage after hard use, and have a shop check them during regular vehicle service. If a shock starts leaking fluid, it needs replacement — they can't be rebuilt.