A Magneride delete kit removes your car's adaptive damping system and replaces it with passive shocks

A Magneride delete kit is an aftermarket suspension component that replaces your vehicle's Magneride dampers—the electronically controlled shocks that adjust stiffness in real time—with conventional hydraulic shocks that have a fixed damping rate. The kit includes new shocks, new springs (usually), new mounts, and sometimes new wiring to disable the Magneride control module. Once installed, your suspension no longer changes its behavior based on road conditions or driving mode; it behaves the same way whether you're on the highway or a rough gravel road.

Magneride systems use magnetorheological fluid inside the shock body. When the car's computer sends an electrical current through that fluid, the fluid's viscosity changes when ready, making the shock stiffer or softer. This happens hundreds of times per second. A delete kit removes that entire system and goes back to a simpler approach: a shock with a fixed internal valve that lets oil flow at one set rate.

The decision to delete Magneride is not about fixing a broken system. It is about changing how your car feels and handles, and accepting trade-offs in comfort and technology in exchange for other benefits.

Key Takeaways

  • Magneride delete kits replace adaptive shocks with passive ones, removing the electronic damping system entirely rather than repairing it.
  • Most owners delete Magneride to reduce unsprung weight, lower cost of future repairs, or achieve a stiffer ride for track use or lowered vehicles.
  • Deleting Magneride means losing real-time suspension adjustment, which reduces ride comfort on mixed road surfaces and removes the ability to switch between comfort and sport modes.
  • Installation requires new shocks, springs, mounts, and electrical disconnection; the work is not a straightforward bolt-on and usually requires professional alignment afterward.
  • Magneride fluid and electronics are expensive to repair or replace, so some owners delete the system to avoid future repair bills on aging vehicles.

Why owners choose to delete Magneride

The most common reason is cost avoidance. A single Magneride damper costs $400 to $800 depending on the vehicle. If one fails—and they do fail, especially on older cars or those driven hard—replacing all four can exceed $2,000 before labor. The control module and wiring add another layer of potential failure points. An owner of a ten-year-old car with 100,000 miles may decide that deleting the system now prevents a much larger repair bill later.

The second reason is weight reduction and handling feel. Magneride dampers are heavier than passive shocks because of the fluid, the solenoid coil, and the internal electronics. Deleting them saves 10 to 20 pounds per corner depending on the vehicle. For cars that are lowered, heavily modified, or used on a track, that weight savings improves acceleration, braking, and cornering. The stiffer, more direct feel of a passive shock also appeals to drivers who prefer a connected, responsive suspension over one that smooths out every bump.

A third reason is simplicity and tuning control. With a passive shock, you choose the spring rate and damping rate once during installation, and that is what you get. You can adjust it by changing springs or shocks, but you control the outcome directly. Magneride behavior is controlled by the car's computer, which you cannot easily reprogram. Some owners find that freedom appealing, especially if they plan to modify other suspension components.

What you lose when you delete Magneride

The most obvious loss is ride comfort on varied road surfaces. Magneride stiffens when the car detects a bump or hard cornering, then softens again on smooth roads. A passive shock cannot do that. It will either be tuned for comfort (and feel loose in corners) or tuned for handling (and feel harsh on bumps). Most delete kits lean toward the handling side because that is what owners usually want, but the trade-off is real: potholes, gravel, and expansion joints will feel sharper.

You also lose driving mode selection. Many cars with Magneride let you choose Comfort, Sport, or Track modes, each of which adjusts damping on the fly. After a delete, there is no mode selection. The suspension behaves one way all the time. If you regularly switch between highway cruising and spirited driving, you will feel this loss.

A third loss is resale value and market appeal. Magneride is a premium feature. Buyers of used performance cars often expect it and may view a delete as a downgrade, even if the replacement shocks are high quality. If you plan to sell the car in a few years, deleting Magneride may make it harder to find a buyer willing to pay what you want.

What a typical Magneride delete kit includes

A complete kit usually contains four new dampers (shocks), four new springs, new top mounts or strut hats, and sometimes new sway bar links or control arm bushings if the original geometry requires it. The shocks are almost always coilover-style, meaning the spring wraps around the shock body, which gives you the option to adjust ride height later.

The kit also includes instructions for disconnecting the Magneride wiring harness and, in some cases, a module to disable warning lights on the dashboard. Some kits require you to reprogram the car's computer to turn off Magneride-related fault codes; others straightforward unplug the system and leave the computer to report a disabled module (which is harmless but may show a warning light).

Quality varies widely. Budget kits use economy shocks and springs that may not match the original Magneride's performance envelope. Mid-range kits use reputable aftermarket brands like Bilstein, KW, or Öhlins and are tuned specifically for the vehicle. High-end kits use track-grade dampers and allow adjustment of compression and rebound damping. The price difference between a $600 kit and a $2,500 kit is real and shows up in ride quality and durability.

Installation and what happens next

Magneride deletion is not a bolt-on job. The work requires removing the wheels, unbolting the original dampers, disconnecting the electrical connectors, installing new shocks and springs, reconnecting or capping off the wiring, and then getting a full wheel alignment because the ride height and suspension geometry have changed. Most shops charge $1,500 to $3,000 in labor depending on the vehicle and whether they need to reprogram the computer.

After installation, you will notice the change when ready. The car will sit lower (unless you adjust the coilovers back up), and the suspension will feel noticeably stiffer. On smooth roads, this feels great. On rough roads, it will be harsher than before. Brake dive and body roll in corners will be more pronounced if you chose a softer setup, or nearly eliminated if you chose a stiff one. It takes a few hundred miles to adjust to the new feel.

Some owners report that their car pulls slightly to one side after deletion, even after alignment. This usually means the new springs have different rates than the originals, or the shocks are not matched in damping. A good shop will catch this during alignment and adjust accordingly.

Magneride delete kits for specific vehicles

The most common applications are Dodge Challengers and Chargers (2015 and newer), Chevrolet Camaros (2016 and newer), and Ford Mustangs (2015 and newer). These cars came with Magneride as a performance option, and the aftermarket has responded with dozens of kit options. Kits also exist for Cadillac CTS-V, Jeep Grand Cherokee Trackhawk, and some BMW and Porsche models, though availability and quality vary.

Before buying a kit, verify that it is designed for your specific year and model. A kit for a 2016 Challenger will not fit a 2020 Challenger because the suspension geometry changed. Check the manufacturer's website or call a suspension shop that specializes in your car to confirm fitment.

Comparing delete kits to other options

If your Magneride system is failing, you have three paths: repair it, delete it, or replace it with a new Magneride system. Repair usually means replacing one or more dampers and possibly the control module, which costs $1,500 to $3,500. Replacement with OEM Magneride parts costs $2,500 to $4,000. A delete kit costs $1,200 to $3,000 installed, depending on quality. On cost alone, a quality delete kit is competitive with repair, but it changes the car permanently.

If your Magneride is working fine but you want a stiffer, more responsive suspension for track use or lowering, a delete kit is a direct path. The alternative is to keep Magneride and add stiffer springs or adjust the damping through the car's computer (if that option exists for your model), but this is less common and often requires custom tuning.

Frequently Asked Questions

Will deleting Magneride void my warranty?

If your car is still under manufacturer warranty, yes—suspension modifications void the powertrain and suspension coverage. If your warranty is already expired, there is no warranty to void. Check your warranty documents or contact your dealer if you are unsure of your coverage status.

Can I reinstall Magneride after deleting it?

Technically yes, but it is expensive and impractical. You would need to source used or new Magneride dampers, the control module, all wiring, and new mounts, then have a shop reprogram the computer. Most owners who delete Magneride do not go back.

Do I need to reprogram my car's computer after a delete?

It depends on the kit and the vehicle. Some kits include a module that disables the Magneride fault codes. Others require a dealer or tuner to reprogram the computer. A few kits straightforward unplug the system and leave a warning light on the dashboard, which is harmless. Ask the kit manufacturer what is required for your car before you buy.

Will a delete kit make my car sit lower?

Most delete kits use coilover shocks, which allow you to adjust ride height. The springs may be stiffer than the originals, which can lower the car slightly if you do not adjust them. You can raise or lower the car by turning the adjustment collar on the coilover body, usually without removing the wheel.

What is the best delete kit for a Challenger?

Popular options include Bilstein PSS10, KW V3, and Öhlins Road & Track, each with different tuning and price points. Bilstein is the most affordable and reliable. KW offers more adjustability. Öhlins is the most expensive and track-focused. Your choice depends on whether you prioritize comfort, adjustability, or performance, and how much you want to spend.