Pedders is an aftermarket suspension brand, not a repair shop

Pedders makes suspension components — springs, shocks, sway bars, and complete kits — that you install on your vehicle to change how it rides and handles. They do not operate repair locations or perform installations themselves. You buy Pedders parts through retailers or online, then have a mechanic or suspension shop install them, or install them yourself if you have the skills.

Pedders is an Australian company that has sold suspension parts in North America for decades. Their products range from mild upgrades for daily drivers to performance-focused setups for track use. The brand is known for tuning suspension geometry and stiffness rather than just lowering a vehicle.

If you are looking for a place to have suspension work done, you need an independent mechanic, a tire and suspension shop, or a dealership. If you are looking for specific suspension parts, Pedders makes them — but you will source them through a retailer and arrange installation separately.

Key Takeaways

  • Pedders manufactures suspension parts like springs, shocks, and sway bars; they do not run repair shops or install parts.
  • You purchase Pedders components through online retailers, tire shops, or suspension specialists, then arrange installation with a mechanic.
  • Pedders kits are designed for specific vehicle makes and models, so you need to confirm your exact year, model, and engine size before ordering.
  • Installation cost varies widely depending on your vehicle and which shop does the work, and is separate from the cost of the parts themselves.

How Pedders suspension parts differ from OEM components

Original equipment (OEM) suspension comes from your vehicle's manufacturer and is tuned for comfort, durability, and cost. Pedders suspension is tuned for a different goal — usually a firmer ride, sharper handling, or lower ride height. The springs are stiffer, the shocks are valved differently, and the geometry may be adjusted through camber plates or other hardware.

OEM parts are what your vehicle left the factory with. They wear out over time and need replacement. When you replace them with OEM parts again, you get the same ride and handling you started with. When you replace them with Pedders, you change how the vehicle behaves.

Pedders parts cost more than basic replacement OEM parts, but less than full custom suspension builds. They are a middle ground between keeping your vehicle stock and going to a full coilover system or air suspension.

What Pedders makes and what it does not

Pedders manufactures coil springs, shock absorbers, sway bars, strut assemblies, and complete suspension kits. A kit typically includes springs and shocks matched to work together, sometimes with sway bars and other hardware. They make kits for common vehicles — trucks, SUVs, sedans — across multiple model years.

Pedders does not make brake components, wheels, tires, or drivetrain parts. They do not offer alignment services, installation, or warranty work through their own locations. They do not make air suspension systems or fully adjustable coilover kits (though other brands do).

If you need a suspension component that Pedders does not make, or if you want a different tuning approach, other brands like Bilstein, KYB, Rancho, and Fox make suspension parts for similar vehicles. Your mechanic or suspension shop can recommend alternatives based on your vehicle and what you are trying to achieve.

Finding and buying Pedders parts for your vehicle

Start by confirming your vehicle's year, make, model, and engine size. Pedders kits are vehicle-specific, and ordering the wrong one means wasted time and return shipping. Check your vehicle registration or owner's manual if you are unsure.

Search for "Pedders [your vehicle]" on the Pedders website or on major online retailers like Amazon, eBay, or RockAuto. Tire and suspension shops often stock Pedders parts or can order them. Call ahead to confirm they have what you need in stock, because lead times vary.

Compare prices across retailers — the same kit may cost different amounts depending on the seller. Factor in shipping cost if you are ordering online, and ask whether the retailer offers installation services or can recommend a local shop. Some retailers bundle parts with installation discounts.

Installation: what to expect and what it costs

Installation requires removing the old suspension components and bolting in the new ones. For a basic spring and shock replacement on a sedan, this typically takes four to eight hours. Trucks and SUVs may take longer. The cost depends on your vehicle, your location, and the shop's labor rate.

After installation, your vehicle will need a wheel alignment. This is not optional — suspension changes alter your wheel angles, and driving without an alignment causes uneven tire wear and poor handling. Alignment typically costs $100 to $200 and takes an hour.

Get a quote from the shop before you buy the parts. Some shops charge a flat rate for suspension installation; others charge hourly. Ask whether alignment is included or separate. If you are buying parts online and having a local shop install them, confirm the shop will work on customer-supplied parts — some will not, or charge a higher labor rate.

When Pedders suspension makes sense for your vehicle

Pedders suspension is useful if your vehicle's original suspension is worn out and you want something firmer or lower than stock. It is also used by owners who want better handling without going to a full performance build. Trucks and SUVs often get Pedders kits for a lower ride height and reduced body roll.

Pedders is not the right choice if you want air suspension, fully adjustable ride height, or extreme lowering. It is not the right choice if your suspension is still in good condition and you just want a minor tweak — in that case, replacing only the shocks or only the springs may be cheaper and simpler.

If you are unsure whether Pedders is right for your vehicle and your goals, talk to a suspension shop. They can assess your current suspension, explain what Pedders offers, and recommend whether it makes sense for you. This conversation is usually free.

Warranty and support for Pedders parts

Pedders parts typically come with a manufacturer's warranty that covers defects in materials and workmanship. The length and terms vary by product and region. Check the warranty documentation that comes with your parts, or contact the retailer you bought from.

Warranty claims usually go through the retailer or the installer, not directly to Pedders. If a part fails, contact the shop that installed it first. They can document the failure and submit a claim on your behalf. Keep your receipt and any paperwork from installation.

Pedders does not cover wear and tear, damage from accidents, or problems caused by improper installation. If your suspension was installed incorrectly, the installer is responsible for fixing it, not Pedders.

Frequently Asked Questions

Can I install Pedders suspension myself?

If you have suspension experience and the right tools, yes. Spring and shock replacement requires a spring compressor, jack, and basic hand tools. If you are not confident, have a shop do it. Poor installation can damage parts, harm handling, or create safety issues. The labor cost is worth the peace of mind.

Will Pedders suspension lower my vehicle?

Most Pedders kits lower the vehicle slightly compared to worn OEM suspension, but not dramatically. If you want a significant drop, you need a lowering kit specifically designed for that. Ask the retailer or shop what ride height change to expect from the kit you are buying.

Do I need new parts other than springs and shocks?

Possibly. If your sway bar links, control arm bushings, or other suspension hardware are worn, replacing them at the same time is smart — you already have the suspension apart. Your mechanic can tell you what else needs attention during the installation.

How long do Pedders parts last?

Shocks typically last 50,000 to 80,000 miles. Springs can last much longer if they are not damaged. Lifespan depends on driving conditions, road quality, and how hard you drive. Regular inspection during tire rotations helps catch wear early.

What if the Pedders kit does not fit my vehicle?

Return it to the retailer you bought from. Make sure you ordered the correct year, make, and model before installing. If you installed it and it does not fit, you may be responsible for return shipping and restocking fees. Confirm fitment before you buy.