Electric power steering systems don't use hydraulic fluid at all
If your car has electric power steering (EPS), there is no power steering fluid reservoir under the hood and nothing to top up. Electric systems use an electric motor mounted on or near the steering rack to information your steering effort, not pressurised fluid. This is fundamentally different from the hydraulic power steering that older cars and many trucks still use.
The confusion arises because hydraulic power steering—the older technology—relies on a pump driven by the engine, a pressurised fluid circuit, and a control valve to make steering easier. Electric power steering replaces that entire hydraulic system with a motor, sensors, and an electronic control module. The motor only runs when you turn the wheel, which is why electric systems are more fuel-efficient and why manufacturers have switched to them almost entirely since the early 2000s.
If you own a car with electric power steering and someone tells you that you need to change the power steering fluid, they are either mistaken about your car's system or trying to sell you a service you do not need.
Key Takeaways
- Electric power steering systems use an electric motor instead of hydraulic fluid, so there is no fluid to check, top up, or change.
- Hydraulic power steering (still found in some trucks and older vehicles) does require fluid maintenance, but electric systems do not.
- If a shop recommends power steering fluid service on an electric system, verify your car's actual steering type before paying for work.
- Electric power steering failures are usually electrical or mechanical and cannot be fixed by changing fluid.
How electric power steering actually works
An electric motor is bolted directly to the steering rack or column, depending on the design. When you turn the steering wheel, sensors detect the angle and speed of your input. The electronic control module reads those sensors and tells the motor how much information to provide—more information at low speeds (like parking) and less at highway speeds (for better road feel and stability).
The motor draws power from the car's 12-volt or 48-volt electrical system. It only consumes energy when you are actively steering, which is why electric systems reduce fuel consumption compared to hydraulic systems that run a pump constantly. There are no hoses, no pressure lines, no fluid seals, and no reservoir. The only maintenance the steering system itself typically needs is occasional inspection of the motor connections and the steering rack for wear or damage.
What happens if your electric power steering fails
When an electric power steering system fails, the problem is almost always electrical or mechanical—a faulty motor, a broken sensor, a wiring issue, or a damaged steering rack. Changing fluid will not fix any of these problems because there is no fluid in the system to change.
If your power steering warning light comes on or you notice the steering has become stiff and heavy, the issue is likely a loss of electrical power to the motor, a sensor malfunction, or a mechanical failure in the steering rack itself. A diagnostic scan will reveal the actual fault code. Attempting a fluid service on a system that has no fluid is a waste of money and delays the real repair.
In some cases, if the motor or control module fails completely, you may lose power information entirely and have to steer the car manually—which is possible but requires significantly more physical effort, especially at low speeds or when parking.
Hydraulic power steering still exists—know which system you have
Many pickup trucks, some commercial vehicles, and older cars still use hydraulic power steering. If your vehicle has hydraulic power steering, you do need to maintain the fluid. The fluid should be checked regularly (at least annually) for colour and level, and it may need to be flushed and replaced according to your manufacturer's schedule, which varies by brand and model.
To find out which system your car has, check your owner's manual or look under the hood. A hydraulic system will have a power steering fluid reservoir (usually a translucent plastic bottle with a cap marked "Power Steering Fluid"). An electric system will have no reservoir and no fluid cap. You can also ask your dealer or a steering specialist—they can tell you in seconds.
If you drive a truck or an older vehicle and you are unsure, do not assume. A shop that recommends a service you do not need is not being helpful, and a shop that performs a service on the wrong system is wasting your time and money.
Why shops sometimes recommend unnecessary power steering service
Some service advisors may not be familiar with the difference between electric and hydraulic systems, or they may be reading from a generic maintenance checklist that applies to older vehicles. Others may be following a shop's standard service menu without checking what system is actually in your car. This is a failure of attention, not necessarily dishonesty, but the result is the same: you are offered a service that does nothing.
Before you authorise any power steering service, ask the shop to confirm your car's steering type and explain what they are servicing and why. If they cannot give you a clear answer, or if they insist on a fluid service for an electric system, take your car elsewhere. A reputable shop will know the difference and will not recommend work that your car does not need.
Electric power steering maintenance you actually need
Electric power steering systems are largely maintenance-free compared to hydraulic systems. There is no fluid to monitor, no pump to wear out, and no pressure lines to leak. However, the system still needs basic care:
- Keep the steering rack and motor connections clean and free of corrosion, especially in areas with road salt.
- Have the steering system inspected if you notice any unusual noises, vibration, or stiffness in the wheel.
- If the power steering warning light comes on, have the system scanned for fault codes rather than guessing at the problem.
- Follow your manufacturer's recommended service intervals for any steering-related work, which will be listed in your owner's manual.
Most electric power steering systems will outlast the car without any fluid-related maintenance. The real risk is electrical corrosion, sensor failure, or mechanical wear in the rack itself—none of which are prevented or fixed by changing a fluid that does not exist.
Frequently Asked Questions
Can I damage my electric power steering by not changing the fluid?
No. Electric power steering systems contain no fluid, so there is nothing to change and nothing to damage by not changing it. If someone recommends a fluid service for your electric system, they are describing work that your car does not need.
What if my power steering feels stiff or unresponsive?
Stiff steering in an electric system usually means the motor is not receiving power, a sensor is faulty, or the steering rack is damaged. Have the system scanned for fault codes. Do not assume a fluid service will help—it will not, because there is no fluid to service.
Is electric power steering more reliable than hydraulic?
Electric systems have fewer moving parts and no fluid to leak or degrade, so they tend to be more reliable over time. However, they depend on electrical connections and sensors, which can fail. Both systems can last the life of the car if maintained properly.
How do I know if my car has electric or hydraulic power steering?
Check your owner's manual or look under the hood for a power steering fluid reservoir. Electric systems have no reservoir. You can also ask your dealer or a steering specialist—they can confirm your system type when ready.
What should I do if a shop recommends power steering fluid service?
Ask them to confirm your car's steering type and explain what they are servicing. If they cannot give you a clear answer or insist on servicing an electric system, seek a second opinion from another shop or your dealer.