Shock and strut replacement typically costs between $300 and $1,000 per axle, depending on your vehicle, the parts you choose, and whether you go to a dealership or independent shop.

The price breaks into two parts: the parts themselves and the labor. A single shock or strut assembly ranges from $150 to $400 new, but you usually replace them in pairs (both front or both rear), and labor runs $150 to $300 per side. Dealerships charge more than independent mechanics, sometimes 30 to 50 percent more for the same work. Your vehicle's make and model matters — luxury cars and trucks with air suspension systems cost significantly more than standard sedans.

The real cost driver is whether you need both shocks and struts replaced at the same time. Many shops recommend replacing all four when one fails, because uneven suspension wear causes handling problems and accelerates wear on other components. That pushes a single-axle job into a full-vehicle replacement, which can run $800 to $2,000 depending on what you choose.

Key Takeaways

  • Front struts typically cost $400 to $800 per axle installed, while rear shocks run $300 to $600 per axle, but prices vary widely by vehicle and shop.
  • Dealerships charge 30 to 50 percent more than independent mechanics for the same replacement, though they may use OEM parts and offer longer warranties.
  • Replacing all four shocks or struts at once costs more upfront but prevents uneven wear and handling problems that develop when only one axle is done.
  • Aftermarket parts cost less than OEM parts but may not last as long; some shops offer a middle option with quality aftermarket brands that carry longer warranties.

How the cost breaks down: parts versus labor

The total bill has two line items. Parts cost $150 to $400 each for a new shock or strut assembly, depending on whether you buy OEM (original equipment manufacturer) parts from the dealership or aftermarket parts from a supplier. OEM parts are more expensive but are may provide to fit your exact vehicle and often come with a longer warranty. Aftermarket parts are cheaper and can be just as reliable, but quality varies — a $150 strut and a $250 strut from different makers will not perform the same way.

Labor is where the shop's location and reputation show up in the price. An independent mechanic in a lower-cost area might charge $100 to $150 per side, while a dealership in a major city can charge $200 to $300 per side. The job itself takes about an hour per side, so the hourly rate is what you are really paying. Get a quote that breaks out parts and labor separately so you can see what you are actually paying for.

Dealership versus independent shop pricing

Dealerships use OEM parts and employ technicians trained on your specific vehicle. That precision costs money — expect to pay 30 to 50 percent more than an independent shop for the same replacement. A dealership might quote $900 for a front strut replacement that an independent shop does for $600. The dealership warranty is often longer (sometimes three years or unlimited miles), and they will not void your vehicle's warranty by using non-OEM parts.

Independent shops use aftermarket parts and have lower overhead, so they pass savings to you. The trade-off is that you are relying on the shop's reputation and the aftermarket supplier's quality. A good independent shop will stand behind their work with a warranty (typically one year), but it is shorter than a dealership's. If your vehicle is still under manufacturer warranty, check whether using aftermarket parts could void coverage — some dealers take this seriously, others do not.

OEM parts versus aftermarket: what the price difference means

OEM shocks and struts are made by the manufacturer or a supplier contracted by the manufacturer. They are engineered to your vehicle's exact specifications and tuning. They cost 40 to 60 percent more than aftermarket alternatives. If you keep your vehicle for a long time and want the suspension to feel exactly as it did from the factory, OEM is the safer choice.

Aftermarket parts come from independent suppliers like Monroe, Bilstein, KYB, and others. They are cheaper because they are not bound by the manufacturer's specifications and can be sold across multiple vehicle models. Quality varies significantly — a budget aftermarket strut ($150) will not ride or last like a premium one ($280). Many shops offer a middle tier: quality aftermarket brands with good reviews and a longer warranty (two to three years instead of one). That middle option often makes sense financially because you save 20 to 30 percent versus OEM but get better durability than the cheapest aftermarket choice.

Front struts versus rear shocks: different prices, different jobs

Front struts and rear shocks are not the same component, and they do not cost the same to replace. Front struts are more complex — they combine the shock absorber with the spring and bearing, so replacing one is a bigger job. Front strut replacement runs $400 to $800 per axle installed. Rear shocks are simpler and cheaper, typically $300 to $600 per axle installed.

Your vehicle may have struts in front and shocks in back, or shocks on all four corners, depending on the suspension design. Some luxury vehicles and trucks have air suspension systems that cost significantly more to replace — sometimes $1,500 to $2,500 per corner because the parts are more complex and the labor is more involved. Ask the shop which type your vehicle has before you get a quote.

When to replace one axle versus all four

If one shock or strut fails, you do not have to replace all four when ready. You can replace just the failed one or just that axle (both front or both rear). However, most shops recommend replacing all four because suspension components wear together. If the front left strut failed, the front right is probably close behind. Driving with uneven suspension — new on one side, worn on the other — causes the vehicle to handle poorly and accelerates wear on tires, bearings, and other suspension parts.

The math often favors doing all four at once. If front struts cost $500 per side and you do one now and one in six months, you pay $1,000 plus two separate labor charges and two separate shop visits. If you do both at once, you pay $1,000 for parts but only one labor charge, saving $150 to $300. Many shops also offer a small discount (5 to 10 percent) when you replace all four at the same time.

What affects the price for your specific vehicle

Your vehicle's make, model, and year determine the base cost of the parts and how long the job takes. A Honda Civic strut replacement is cheaper and faster than a BMW 7 Series because the parts are simpler and the labor is straightforward. Trucks and SUVs with heavier suspensions often cost more because the components are larger and more robust. Vehicles with air suspension (common on luxury brands and some trucks) cost significantly more — sometimes double or triple — because the parts are electronic and the labor requires specialized knowledge.

The age and condition of your vehicle also matters. Older vehicles with corroded bolts take longer to work on, so labor costs go up. Some vehicles have suspension components that are difficult to access, which adds labor time. Ask the shop whether your specific vehicle has any known complications before they start the job.

Getting an accurate quote

Call or visit three shops — one dealership and two independent mechanics — and ask for a written quote that includes the part name, the part cost, the labor cost, and the warranty. Do not compare prices across shops without knowing whether they are quoting OEM or aftermarket parts, because that difference alone can be $200 or more. Ask whether the quote includes an alignment check, because replacing struts can throw off your wheel alignment and cost another $100 to $200 to correct.

Ask each shop how long the job takes and when they can fit you in. Some shops have a backlog and will quote a higher price if you need it done urgently. If you are not in a hurry, you may save money by scheduling during a slower period. Also ask whether the shop offers a warranty on the work and what it covers — some warranties cover only the parts, others cover both parts and labor.

Frequently Asked Questions

Can I replace just one shock or strut instead of both on the same axle?

Technically yes, but it is not recommended. Suspension components wear together, so if one failed, the other is likely close behind. Replacing just one creates uneven handling and accelerates wear on the other side. Most shops will quote replacing both sides because that is what prevents future problems.

How long do shocks and struts last?

Most shocks and struts last 50,000 to 100,000 miles, depending on driving conditions and the quality of the parts. Rough roads, frequent braking, and heavy loads wear them out faster. If you notice bouncing after bumps or a rough ride, have them inspected — waiting until they fail completely can damage other suspension parts.

Will replacing shocks and struts affect my vehicle's warranty?

Using aftermarket parts may void your manufacturer warranty if the dealership can prove the suspension work caused the problem you are claiming. Using OEM parts will not affect your warranty. If your vehicle is still under warranty, ask the dealership whether aftermarket parts are acceptable before you have the work done elsewhere.

What is the difference between a shock and a strut?

A shock absorber is a standalone component that dampens suspension movement. A strut combines the shock absorber, spring, and bearing into one assembly. Struts are typically in the front; shocks are typically in the rear. Some vehicles have shocks on all four corners. The replacement cost and labor differ because struts are more complex.

Should I get an alignment after replacing struts?

Yes. Replacing front struts can shift your wheel alignment, which causes uneven tire wear and poor handling. Most shops include an alignment check in the quote or offer it as an add-on for $100 to $200. It is worth doing because misalignment will wear out your new tires quickly.