ReadyLift is a lift kit brand that raises your truck's ride height and changes how it handles
ReadyLift makes suspension kits that lift the frame of your truck higher off the ground. The company sells kits for trucks and SUVs — mostly Ford F-150s, Chevrolet Silverados, and Ram 1500s — that range from 1.5 inches to 3 inches of lift. Unlike some competitors, ReadyLift does not replace your shocks or springs entirely. Instead, their kits use spacers, blocks, or torsion bar adjustments to achieve the lift while keeping most of your original suspension parts in place.
The appeal is straightforward: more ground clearance for larger tires, a more aggressive stance, and the ability to see over traffic. The trade-off is real too — you pay between $400 and $1,200 for the kit itself, plus labor to install it, and you alter how your truck rides and handles. A ReadyLift suspension is not a repair; it is a modification that changes your vehicle's behavior in ways you need to understand before committing.
Key Takeaways
- ReadyLift kits raise your truck 1.5 to 3 inches using spacers or torsion bar adjustments, not full suspension replacement.
- You can fit larger tires after lifting, but tire size is limited by your wheel well and fender — not by the lift alone.
- Lifting changes your truck's center of gravity, steering response, and braking behavior, and these changes are permanent until you remove the kit.
- Installation costs $300 to $800 in labor depending on your truck model and local shop rates, on top of the kit price.
- ReadyLift kits do not void your warranty outright, but suspension modifications can disqualify you from coverage on related components.
How ReadyLift kits work and what they actually change
ReadyLift uses three main methods depending on your truck. The most common is a spacer kit, which sits between your existing coil springs and the frame, pushing the frame up without replacing the springs themselves. This is cheaper than a full suspension overhaul and keeps your original ride quality closer to stock. Some kits use torsion bar adjustments — a wrench-turn that pre-loads the torsion bars in your front suspension to raise the nose of the truck. A few models use block kits in the rear, which are metal blocks inserted between the frame and rear axle.
What ReadyLift does not do is replace your shocks, springs, or control arms. That matters because it means your suspension geometry stays mostly the same. Your truck will sit higher, but the angles at which your wheels meet the road do not change as much as they would with a full suspension overhaul. This keeps the cost down and makes installation faster — usually two to four hours at a shop — but it also means you do not get the handling improvements that come with a complete rebuild.
The lift height you choose determines what tires you can fit. A 1.5-inch lift typically allows tires one size larger than stock. A 2.5-inch lift might allow two sizes larger. But your wheel well and fender clearance are the real limit, not the lift itself. A 33-inch tire on a lifted truck can rub the fender when you turn or hit a bump, even if the lift is tall enough. You need to measure or ask your shop whether your chosen tire size will clear.
Cost breakdown: kit price, labor, and hidden expenses
A ReadyLift kit costs between $400 and $1,200 depending on lift height and truck model. A 1.5-inch spacer kit for a Ford F-150 runs roughly $400 to $600. A 2.5-inch kit for the same truck costs $700 to $1,000. A 3-inch kit pushes toward $1,200. These are manufacturer suggested retail prices; you may find kits discounted online, but shipping is often expensive because kits are heavy and bulky.
Installation labor at a shop ranges from $300 to $800. A straightforward spacer kit on a newer truck with good access might take two hours at $100 to $150 per hour. A torsion bar adjustment or a truck with tight engine bay space can take four hours or more. Call three shops in your area and ask for a quote on your specific truck and kit — prices vary widely by region and by how busy the shop is.
After installation, budget for alignment. Lifting your truck changes the angle of your wheels relative to the frame, and your steering will pull or your tires will wear unevenly if you skip this step. Alignment costs $100 to $200 at most shops. You may also need new brake lines or extensions if your lift is 2.5 inches or taller, adding $100 to $300. Some shops include this in their labor quote; others charge separately.
How lifting affects your truck's ride, handling, and safety
Lifting raises your center of gravity. Your truck becomes more top-heavy, which means it is more prone to rolling in sharp turns or on uneven ground. This is not theoretical — studies of lifted trucks show a measurable increase in rollover risk, especially on highways at speed. ReadyLift kits are not as extreme as full 6-inch lifts, but even a 2-inch lift changes your truck's balance. If you tow or carry heavy loads, the effect is more pronounced.
Your steering will feel different. Spacer kits do not change steering geometry as much as full suspension lifts, but you will notice a slight increase in steering effort and a change in how the truck responds to small wheel movements. Some drivers adapt in a day or two; others find it unsettling. Test drive a lifted truck of the same model before you commit.
Braking distance increases slightly with a lifted truck, especially if you add larger, heavier tires. Your truck has to work harder to stop because the weight is higher and the rolling resistance is greater. This is not dramatic — you are not looking at a 20 percent increase — but it is real. If you frequently drive in heavy traffic or tow, this matters.
Fuel economy drops. A lifted truck with larger tires has more wind resistance and rolling resistance. Expect a 1 to 3 mile-per-gallon loss depending on your driving and how much you lift. Over a year, that adds up to real money if you drive a lot.
ReadyLift versus other suspension options
ReadyLift competes mainly with Rough Country, Rancho, and BDS Suspension. Here is how they differ:
| Brand | Typical Lift Height | Method | Price Range | Best For |
|---|---|---|---|---|
| ReadyLift | 1.5 to 3 inches | Spacers, torsion bar, blocks | $400–$1,200 | Budget-conscious buyers who want modest lift and straightforward installation |
| Rough Country | 2 to 6 inches | Spacers, springs, full kits | $300–$2,000 | Buyers wanting more lift options and aggressive styling |
| Rancho | 1 to 3 inches | Spacers, shocks | $600–$1,500 | Buyers prioritizing ride quality and off-road performance |
| BDS Suspension | 2 to 6 inches | Full suspension overhaul | $1,500–$4,000 | Serious off-road users who want maximum performance |
ReadyLift is the middle ground. It costs less than Rancho or BDS but offers less customization than Rough Country. If you want a straightforward, affordable lift for street use and do not plan to go off-road, ReadyLift is a solid choice. If you want to tow heavy loads or drive rough terrain regularly, a full suspension kit from BDS or Rancho may be worth the extra cost because they replace shocks and springs, not just spacers.
Warranty and long-term durability concerns
ReadyLift kits themselves come with a limited lifetime warranty against defects in materials and workmanship. That covers the spacer or block failing, not wear and tear. The warranty does not cover installation labor or damage caused by off-road use.
Your truck's factory warranty is more complicated. Suspension modifications do not automatically void your entire warranty, but they can disqualify you from coverage on suspension-related repairs. If your truck develops a problem with the steering, shocks, springs, or frame alignment after you install a ReadyLift kit, the dealer may refuse to cover it under warranty. They will argue the modification caused the problem. Whether they are right depends on the specific failure and your state's warranty laws, but the dispute is not worth the headache.
Long-term durability depends on how you drive. A ReadyLift kit on a truck that stays on paved roads and sees normal use will last as long as your truck does. The spacers do not wear out. But if you drive rough roads, ford water, or hit rocks regularly, the extra stress on your suspension components can shorten their life. Your shocks and springs were designed for stock ride height; lifting them changes the load they carry.
When a ReadyLift suspension makes sense and when it does not
A ReadyLift kit makes sense if you want a modest lift for appearance, need slightly larger tires for better traction in snow or light off-road use, and plan to keep your truck for several more years. The cost is reasonable, installation is straightforward, and you get a noticeable change in how your truck looks and performs.
A ReadyLift kit does not make sense if you tow heavy loads regularly — the extra height and weight distribution will strain your suspension. It does not make sense if you plan to sell your truck soon, because buyers often view modifications as red flags and the resale value gain does not justify the cost. It does not make sense if you drive mostly highway miles and want to maximize fuel economy. And it does not make sense if you want serious off-road capability — you need a full suspension overhaul for that, not a spacer kit.
Be honest about why you want the lift. If it is purely for looks, that is fine — just know you are paying $1,500 to $2,000 total (kit plus labor plus alignment) for an aesthetic change. If it is for function, make sure the function you want actually requires a lift. Larger tires for winter traction, for example, do not need a lift — you can fit 33-inch tires on many trucks without lifting. A lift just makes it easier and looks better.
Frequently Asked Questions
Will a ReadyLift suspension hurt my truck's resale value?
Most buyers view suspension modifications as a negative because they signal hard use and potential hidden damage. You will not recover the cost of the lift in resale value. Some buyers specifically want lifted trucks, but they are a smaller market. If you plan to sell within three years, skip the lift.
Can I install a ReadyLift kit myself?
Some kits are DIY-friendly if you have basic tools and mechanical experience. Spacer kits are simpler than torsion bar adjustments. But if you make a mistake, your truck becomes unsafe. Most people should pay a shop. The labor cost is worth the safety and warranty protection.
Do I need new shocks after lifting with ReadyLift?
Not when ready. Your factory shocks will work with a ReadyLift spacer kit, though they will wear faster because they are working at a different angle. Many owners upgrade to aftermarket shocks within a year or two for better ride quality. Budget for this if you plan to keep the truck long-term.
What size tires can I fit after a ReadyLift lift?
It depends on your truck model and lift height. A 1.5-inch lift typically allows one tire size larger than stock. A 2.5-inch lift allows two sizes larger. But your wheel well and fender are the real limit. Ask your shop to measure clearance before you buy tires, or look up your specific truck on ReadyLift's website — they list compatible tire sizes for each kit.
Does ReadyLift affect my truck's warranty?
ReadyLift kits do not automatically void your warranty, but suspension modifications can disqualify you from coverage on suspension-related repairs. The dealer may refuse to cover steering, shock, spring, or frame issues if they believe the lift caused the problem. Check your warranty documents and ask your dealer before installing a kit.