What ReadyLift suspension kits are and what they change
ReadyLift suspension kits are bolt-on lift systems that raise the ride height of trucks and SUVs, typically by 1.5 to 3 inches depending on the kit. The kits use a combination of new coil springs, spacers, and sometimes shocks to achieve the lift without replacing the entire suspension. ReadyLift is a manufacturer based in Oklahoma that makes kits specifically engineered for popular truck models—mainly Ford F-150, Chevrolet Silverado, GMC Sierra, and Dodge Ram trucks.
The core change is height. A lifted truck sits higher off the ground, which clears larger tires, improves approach and departure angles for off-road driving, and changes the truck's stance and appearance. ReadyLift kits are designed to maintain the truck's factory ride quality and handling characteristics better than some other lift options, because they use engineered springs and shocks rather than just spacers alone.
These are not full suspension replacements. ReadyLift kits work with your existing frame and suspension geometry, which means installation is faster and less expensive than a complete suspension overhaul. However, they do require professional installation and may affect your truck's warranty, fuel economy, and speedometer accuracy.
Key Takeaways
- ReadyLift kits raise truck height by 1.5 to 3 inches using engineered springs and spacers designed for specific truck models.
- Installation typically takes 4 to 8 hours at a shop and costs between $800 and $2,500 for parts and labor combined, depending on the kit and your location.
- Lifting your truck may void or complicate your factory warranty, affect your speedometer reading, and reduce fuel economy by 1 to 3 miles per gallon.
- You will need larger tires to fill the wheel well properly and avoid rubbing, which adds cost beyond the suspension kit itself.
- ReadyLift kits are engineered for specific truck years and models, so you must match the kit to your exact vehicle to avoid fitment problems.
How ReadyLift kits compare to other lift options
ReadyLift competes with several other lift methods. A spacer lift (also called a leveling kit) uses rubber or polyurethane spacers between the spring and frame to raise the truck 1 to 2 inches. Spacers are cheaper and faster to install but do not improve ride quality and can wear out faster. ReadyLift kits include new springs engineered to handle the extra height, so they maintain suspension performance longer.
A coilover suspension replaces the entire front suspension with adjustable coil-over shocks. Coilovers offer more height adjustment and better handling for aggressive driving, but they cost $2,000 to $5,000 or more and require more extensive installation. ReadyLift kits are a middle ground—cheaper than coilovers, more refined than spacers alone.
Air suspension lifts use air springs to adjust height on demand, common on luxury trucks. These are expensive and complex to maintain. ReadyLift kits are fixed-height, simpler, and more reliable for everyday use.
What ReadyLift kits include and what you need to buy separately
A typical ReadyLift kit includes front coil springs, rear coil springs or leaf spring spacers, and sometimes front shocks. Some kits also include bump stops and sway bar links to maintain proper suspension geometry. What you get depends on the specific kit—a 2.5-inch front lift kit for a Ford F-150 will differ from a 3-inch kit for a Chevrolet Silverado.
You will need to buy tires separately. Lifting your truck creates more space in the wheel well, and most owners install tires one to two sizes larger than stock. A stock F-150 might come on 33-inch tires; after a 2.5-inch lift, many owners go to 35-inch or 37-inch tires. Larger tires cost $150 to $300 each, plus installation and balancing. Without larger tires, your truck will look awkward (the wheel well will be mostly empty) and your speedometer will read higher than your actual speed.
You may also need a speedometer recalibration if you install significantly larger tires. Larger tires rotate slower than stock tires at the same speed, so your speedometer will overread. Some shops can reprogram your truck's computer; others use a standalone module. This costs $150 to $400.
Installation process and what to expect at a shop
ReadyLift kits are designed for bolt-on installation, meaning a may have access to shop can install them without welding or cutting frame components. The process typically takes 4 to 8 hours depending on the kit and your truck's condition. The shop will lift the truck, remove the wheels, disconnect the front and rear suspension components, install the new springs and spacers, reconnect everything, and test the alignment.
Most shops will recommend a wheel alignment after installation, which costs $100 to $200. Lifting changes the angles of your suspension geometry, and alignment ensures your tires wear evenly and your truck handles predictably. Some shops include alignment in their installation quote; others charge separately.
You should expect the shop to ask for your truck's year, make, model, and current mileage. They may also ask whether you plan to tow or carry heavy loads, because that affects which kit they recommend. Be honest about your plans—a kit designed for light use may not perform well if you regularly tow a trailer.
Cost breakdown: parts, labor, and hidden expenses
ReadyLift kit prices vary widely. A basic 2-inch front leveling kit for a Ford F-150 might cost $400 to $600 for parts alone. A full 2.5-inch front and rear kit for the same truck could run $800 to $1,200. Larger lifts (3 inches or more) or kits for less common truck models may cost more.
Labor at a professional shop typically runs $400 to $1,200 depending on your location and the shop's hourly rate. Rural shops may charge $80 to $120 per hour; urban shops often charge $150 to $200 per hour. A 6-hour installation at $150 per hour is $900 in labor alone.
Beyond the kit and installation, budget for tires ($600 to $1,200 for four), alignment ($100 to $200), and possibly speedometer recalibration ($150 to $400). A complete lift project—kit, installation, tires, and alignment—often totals $2,000 to $3,500. Some owners spend more if they add new wheels or upgrade shocks.
Effects on warranty, fuel economy, and vehicle performance
Installing a ReadyLift kit may void or complicate your factory suspension warranty. Most manufacturers will not cover suspension components if you have modified them, though some may cover unrelated systems. Check your warranty documents or call your dealer before installation to understand what you will lose. If your truck is still under warranty and you are unsure, ask the shop whether they have experience with warranty claims on lifted trucks.
Fuel economy typically decreases by 1 to 3 miles per gallon after a lift, especially if you install larger tires. Larger tires have more rolling resistance, and the higher ride height increases aerodynamic drag. The exact loss depends on your driving habits and tire choice. If you drive mostly highway, the loss may be closer to 1 mpg; if you drive mostly city or tow, it could be 2 to 3 mpg.
Ride quality usually improves or stays the same with a ReadyLift kit, because the new springs are engineered for the lifted height. However, your truck will sit higher, which changes how it feels in corners and may make it feel less stable in emergency maneuvers if you are used to a lower ride height. Handling is still safe for normal driving, but aggressive cornering or sudden lane changes may feel different.
Choosing the right ReadyLift kit for your truck
ReadyLift makes kits for specific truck years and models. A kit for a 2019 Ford F-150 will not fit a 2015 F-150 or a Chevrolet Silverado. Before you buy, confirm your truck's exact year, generation, and cab style (regular cab, SuperCab, SuperCrew, etc.). This information is on your vehicle registration or in your owner's manual.
Decide how much lift you want. A 1.5-inch kit is subtle and minimizes fuel economy loss and tire wear. A 2.5-inch kit is popular for a noticeable change without extreme angles. A 3-inch kit or larger is more aggressive and requires larger tires and more maintenance. Consider your actual needs—if you mostly drive on pavement, a smaller lift is sufficient. If you plan serious off-road use, a larger lift may be worth the trade-offs.
Check whether the kit is front-only or front-and-rear. A front-only kit (leveling kit) raises the front to match the rear, creating a level stance. A full kit raises both front and rear for a more dramatic look. Front-only kits are cheaper and less disruptive to ride quality; full kits change the truck's appearance more noticeably.
Frequently Asked Questions
Will a ReadyLift kit affect my truck's towing capacity?
ReadyLift kits do not reduce towing capacity, but they do change suspension geometry slightly. The new springs are rated for the lifted weight, so towing should be safe. However, towing with a lifted truck and larger tires changes how the truck handles and brakes. Consult your truck's manual for towing limits and ask the shop whether they recommend any additional upgrades if you tow regularly.
Can I install a ReadyLift kit myself?
ReadyLift kits are designed for professional installation. The work requires lifting the truck safely, disconnecting suspension components, and ensuring everything is torqued to specification. Mistakes can cause suspension failure or unsafe handling. Unless you have suspension experience and proper equipment, professional installation is worth the cost.
Do I need new shocks when I lift my truck?
Some ReadyLift kits include shocks; others do not. If your kit does not include them, you may still use your factory shocks, but they will wear faster because they are now working at a different angle and range of motion. Many owners replace shocks at the same time as the lift for better performance and longevity. Ask the shop whether shock replacement is recommended for your specific kit.
Will my speedometer be wrong after a ReadyLift lift?
Yes, if you install larger tires. Larger tires rotate slower, so your speedometer will read higher than your actual speed. For example, with 35-inch tires instead of 33-inch, your speedometer might read 35 mph when you are actually going 33 mph. A speedometer recalibration corrects this and costs $150 to $400.
How long do ReadyLift kits last?
ReadyLift springs and components are designed to last as long as factory suspension—typically 100,000 to 150,000 miles or more. However, larger tires and the lifted geometry increase wear on suspension bushings and joints. Regular maintenance, including alignment checks and suspension inspections, extends the life of the kit.