Front strut replacement typically costs between $400 and $1,200 per side at a shop, depending on your vehicle, the strut brand, and your location

A single front strut assembly includes the shock absorber, spring, and mounting hardware all in one unit. When one fails, you usually replace both sides at the same time to keep your suspension balanced — that's why most quotes you'll see are for a pair. Labor runs $150 to $400 per side. Parts themselves range from $150 to $600 per side, with aftermarket units on the lower end and OEM (original equipment manufacturer) parts on the higher end.

The final bill depends on what your vehicle is. A Honda Civic strut costs less than a BMW or truck strut. Your location matters too — shops in urban areas and dealerships charge more than independent mechanics in smaller towns. Whether you go to a dealership, a chain shop like Firestone, or an independent mechanic will also shift the price.

Key Takeaways

  • Front struts on both sides typically cost $400 to $1,200 total at a shop, with labor making up roughly half that amount.
  • OEM struts from the dealership cost more than aftermarket brands, but aftermarket struts from reputable makers carry the same warranty coverage.
  • Independent mechanics usually charge less labor than dealerships, but verify they have the alignment equipment to finish the job correctly.
  • Replacing struts is not a DIY job for most people — it requires a spring compressor and alignment afterward, which adds cost if you don't have the tools.

What the parts themselves cost

Aftermarket strut assemblies run $150 to $300 per side and come from brands like KYB, Monroe, and Bilstein. These are not cheap knockoffs — they're made by the same manufacturers that supply OEM parts, just sold under different names. Most carry a three-year or 36,000-mile warranty.

OEM struts from your vehicle's manufacturer cost $250 to $600 per side. You buy them through a dealership parts department. They carry the full factory warranty, which matters if you plan to keep the vehicle long-term, but you're paying for the brand name and the dealership markup.

Premium struts from Bilstein, Koni, or similar performance brands run $300 to $600 per side and are worth considering if your vehicle has high mileage or you drive on rough roads. They last longer and handle better than budget options, but the difference is noticeable mainly if you're comparing them side by side.

Labor costs at different shop types

A dealership typically charges $200 to $400 per side in labor. This includes removing the old strut, installing the new one, and a wheel alignment afterward. Dealerships have the right equipment and know your vehicle's exact specifications, but they charge the highest hourly rate.

Independent mechanics usually charge $150 to $300 per side. The quality varies — a good independent shop will do the alignment and get it right; a rushed one might skip it or do it poorly. Ask whether the quote includes alignment before you commit.

Chain shops like Firestone, Midas, or Monro fall in the middle at $175 to $350 per side. They have alignment bays and standardized procedures, so the work is usually consistent. They often run promotions on suspension work, so it's worth calling a few locations in your area.

Why alignment costs are part of the real bill

After strut replacement, your wheels need a four-wheel alignment. This is not optional — new struts change your suspension geometry, and driving without alignment will wear your tires unevenly and make the steering feel off. Alignment typically costs $100 to $200 at an independent shop and $150 to $250 at a dealership.

Some shops bundle alignment into the strut labor quote; others charge it separately. When you call for a quote, ask specifically whether alignment is included. If it's not, add it to the total before comparing prices.

Signs your front struts need replacement

Struts wear out gradually, so you might not notice until the ride becomes noticeably bouncy or the steering feels loose. Common signs include the car bouncing after hitting a bump instead of settling quickly, nose-diving when you brake hard, or a clunking sound from the front suspension over rough roads.

A mechanic can inspect them during a regular service. If you're at 80,000 miles or higher, struts are worth inspecting even if you don't notice symptoms — they often fail without obvious warning, and a failed strut can damage other suspension parts if you keep driving.

Aftermarket versus OEM: which makes sense

If you plan to sell or trade the vehicle within a few years, aftermarket struts from a known brand like KYB or Monroe are the practical choice. They cost less, work well, and come with a solid warranty. Most buyers won't know or care whether the struts are OEM or aftermarket.

If you're keeping the vehicle long-term or it already has high mileage, OEM struts make more sense. They're engineered specifically for your vehicle, and the factory warranty gives you peace of mind if something goes wrong. The extra cost is smaller when spread over many years of ownership.

Premium struts like Bilstein are worth considering if you drive on rough roads, tow a trailer, or want a noticeably smoother ride. They cost more upfront but last longer and handle better than budget options.

What affects the final price

FactorHow it changes cost
Vehicle typeTrucks and luxury vehicles cost more than compact cars; SUVs fall in the middle
Strut brandAftermarket is cheapest, OEM is mid-range, premium brands cost most
Shop typeIndependent mechanics are usually cheapest, dealerships most expensive, chains in the middle
LocationUrban areas and coastal regions charge more than rural areas
Additional workIf the strut mounts or springs are damaged, repair costs increase

When you call shops for quotes, give them your vehicle's year, make, model, and mileage. Quotes that vary wildly — say, $500 versus $1,200 — usually mean one shop is using cheaper parts or skipping alignment. Ask what's included in each quote before deciding.

Frequently Asked Questions

Can I replace just one front strut instead of both?

Technically yes, but it's not recommended. Struts wear at similar rates on both sides, so the other one will likely fail soon. Replacing both at once keeps your suspension balanced and saves you a second trip to the shop. Most mechanics will advise against doing one at a time.

How long does strut replacement take?

The actual work takes two to four hours at a shop. If alignment is included, add another hour. Most shops can finish in a day, but call ahead to confirm availability. Some may need to order parts if they don't stock your vehicle's struts.

Do I need an alignment after strut replacement?

Yes. New struts change the angle of your wheels, and driving without alignment will wear your tires unevenly and make steering feel loose. Most shops include this in the quote, but confirm it before you commit.

What's the difference between a strut and a shock absorber?

A strut is a complete assembly that includes the shock absorber, spring, and mounting hardware in one unit. A shock absorber is just the damping part. Front suspensions typically use struts; rear suspensions often use shocks and separate springs. Your front struts do both jobs at once.

Is it worth paying more for OEM struts?

It depends on how long you're keeping the vehicle. For a car you'll own for many more years, OEM struts and the factory warranty are worth the extra cost. If you're selling soon, a quality aftermarket brand saves money without sacrificing reliability.