What Reyco Granning suspensions are and where you'll find them
A Reyco Granning suspension is an air suspension system built for heavy-duty trucks—primarily Class 8 tractors and trailers that haul freight on highways. Reyco, now owned by Hendrickson, manufactures these suspensions to handle the weight and shock of long-distance hauling while keeping the cab stable and the cargo find. You'll see them on semi-trucks, not on pickup trucks or light vehicles.
The system uses compressed air instead of steel springs to support the truck's weight. Air springs (also called air bags) sit between the axle and the frame, and they adjust automatically to keep the truck level whether it's fully loaded or empty. This matters because a level truck rides better, wears its tires more evenly, and is safer to steer and brake.
Reyco Granning suspensions come in different configurations depending on the truck's job. A tractor pulling a heavy trailer needs a different setup than a dump truck that loads and unloads throughout the day. The suspension you have determines how much weight it can carry, how it handles, and what maintenance it needs.
Key Takeaways
- Reyco Granning suspensions use air springs instead of steel springs, which automatically adjust to keep the truck level under different loads.
- Air springs can fail if seals wear out or if moisture and dirt get into the system, and a failed air spring makes the truck unsafe to drive.
- The suspension system includes an air compressor, dryer, and lines that all need regular maintenance to prevent leaks and contamination.
- Replacing an air spring or repairing a leak costs more than a steel spring repair, but the system lasts longer and reduces wear on tires and the frame.
- Checking air pressure, draining moisture from the air tank, and inspecting for cracks or leaks are the main preventive tasks that keep the system working.
How the air suspension system actually works
The Reyco Granning suspension starts with an air compressor mounted on the engine. As the engine runs, the compressor fills an air tank (called a wet tank or reservoir) with pressurized air. That air travels through lines to the air springs—the rubber and metal bellows that sit on top of each axle.
Inside the air springs is a rubber bladder that inflates and deflates as the truck's weight changes. When you load the truck, the springs compress slightly, and the suspension's control system automatically sends more air into the springs to keep the frame at the correct height. When you unload, air vents out and the springs relax. This automatic leveling is what makes air suspensions valuable on trucks that carry variable loads.
The system also includes a dryer cartridge in the air tank. Compressed air naturally contains moisture, and that moisture can freeze in the lines during cold weather or cause rust inside the springs and valves. The dryer removes most of that moisture before the air reaches the suspension components. Without a working dryer, water builds up and causes corrosion and seal failure.
Common failures and what causes them
Air springs fail when the rubber bladder inside cracks or when the seals around the spring deteriorate. Once a seal leaks, air escapes and the truck loses height on that corner. You'll notice the truck sitting lower on one side, or the cab tilting. A failed air spring is not safe to drive on—the truck becomes unstable, the remaining springs carry uneven load, and braking and steering become unpredictable.
Moisture in the air system is the most common cause of seal failure. If the dryer cartridge is not replaced on schedule, water accumulates in the lines and air springs. That water freezes in cold weather and can crack the rubber, or it causes rust that eats through seals. In warm weather, water promotes mold and corrosion inside the springs.
Leaks also develop in the air lines themselves, especially where lines connect to fittings. Vibration from driving loosens connections over time, and road salt and moisture corrode the metal. A slow leak means the compressor runs more often to maintain pressure, which wears it out faster. A sudden leak can cause complete loss of pressure and leave you stranded.
The air compressor itself can fail if it runs too hard for too long. If the dryer is clogged or lines are blocked, the compressor works overtime trying to maintain pressure. Overheating and wear eventually cause the compressor to stop building pressure, and then no air reaches the springs at all.
Preventive maintenance that actually stops problems
The most important task is replacing the dryer cartridge on schedule. Reyco recommends replacement every 12 months or 100,000 miles, whichever comes first. If you operate in wet or dusty conditions, replace it more often. A new cartridge costs less than $100 and takes 30 minutes to swap out. Skipping this step leads to water damage that costs thousands to repair.
Drain the wet tank regularly—at least monthly, or more often if you drive in humid conditions. Open the drain valve at the bottom of the air tank and let water and sediment flow out until only air comes out. This removes moisture before it reaches the dryer or the suspension lines. Many drivers forget this step because it's straightforward and invisible, but it's one of the highest-return maintenance tasks you can do.
Check air pressure at each corner of the truck weekly. Pressure should be equal on both sides of each axle. If one corner is lower than the others, you have a leak. Find it by spraying soapy water on all connections and springs—bubbles show where air is escaping. Tighten loose fittings or replace damaged lines before the leak gets worse.
Inspect the air springs themselves for visible cracks, bulges, or damage. Look at the rubber bellows and the metal collar at the top and bottom. If you see cracks or the rubber looks soft or sticky, the spring is failing and needs replacement. Catching this early means you replace one spring instead of waiting until it fails completely and damages the axle or frame.
When to replace air springs versus repair them
Air springs cannot be repaired—they must be replaced as a complete unit. A new Reyco Granning air spring costs between $300 and $600 depending on the model and where you buy it. Installation takes 1 to 2 hours per spring. If you have a leak in the line or a loose fitting, that can be repaired by replacing the line or tightening the connection, which is much cheaper.
Replace all four springs at the same time if two or more are failing. Air springs wear at similar rates, so if one has failed, the others are close behind. Replacing them in pairs or one at a time means you'll be back in the shop soon. Doing all four at once costs more upfront but saves labor and downtime.
The compressor can sometimes be rebuilt instead of replaced, but rebuilding costs nearly as much as a new one and takes longer. If your compressor has failed, a new or remanufactured unit is usually the better choice. A new compressor runs $800 to $1,500 installed.
How air suspension maintenance affects tire wear and safety
A level truck wears tires evenly. When the suspension is working correctly, all four tires carry equal weight and wear at the same rate. A failed air spring tilts the frame, which puts extra weight on the tires on that side. Those tires wear faster and fail sooner, costing you money in premature replacement.
Uneven suspension also affects braking. If the truck is tilted, the weight shifts during braking and the truck becomes harder to control. The brakes on the heavier side work harder and wear faster. In an emergency stop, an uneven truck is more likely to jackknife or roll.
Steering is also affected. A tilted frame changes the angle of the front axle and makes the truck pull to one side. You have to fight the steering wheel to keep the truck straight, which tires out the driver and wears the steering components faster. Over time, this leads to more serious steering problems.
Reyco Granning suspensions compared to other air suspension brands
Reyco Granning is one of several air suspension brands used on heavy trucks. Hendrickson (which owns Reyco) also makes the Hendrickson air suspension. Meritor and Sauer are other major manufacturers. All air suspensions work on the same principle—air springs instead of steel springs—but they differ in design, durability, and parts availability.
Reyco Granning suspensions are known for durability in long-haul applications. They hold up well to highway miles and heavy loads. Parts are widely available because Reyco has been in the market for decades. If you need a replacement spring or compressor, you can usually find one quickly.
The main trade-off between air and steel spring suspensions is cost and complexity. A steel spring suspension costs less to buy and has fewer parts to maintain. An air suspension costs more upfront but reduces wear on tires, the frame, and the cab. For trucks that run long distances or carry heavy loads, the air suspension usually pays for itself in reduced tire wear and longer frame life.
Frequently Asked Questions
What does it mean if my truck is sitting lower on one corner?
One low corner almost always means an air spring has failed or a line is leaking on that side. The suspension cannot maintain pressure, so that corner drops. Do not drive the truck—the uneven load damages the axle and frame. Have the system inspected and the failed spring or leak repaired before you move the truck.
How often should I replace the air dryer cartridge?
Reyco recommends every 12 months or 100,000 miles, whichever comes first. If you drive in wet or dusty conditions, replace it more often—every 6 months or 50,000 miles. A clogged dryer lets moisture into the suspension, which causes rust and seal failure. Replacing the cartridge on schedule is the cheapest way to prevent expensive damage.
Can I drive with a leaking air spring?
No. A leaking spring means the truck is uneven and unstable. Braking, steering, and handling are all affected, and you risk jackknifing or rolling. The uneven load also damages the axle and frame. Have the truck towed or repaired before driving it.
Why does my air compressor run all the time?
A compressor that runs constantly usually means the system has a leak or the dryer is clogged. The compressor is working overtime to maintain pressure. Find and fix the leak, or replace the dryer cartridge. If the compressor still runs constantly after that, the compressor itself may be failing and needs replacement.
What is the difference between a wet tank and an air spring?
The wet tank (air reservoir) stores compressed air and collects moisture. The air springs are the rubber bellows that support the truck's weight. The compressor fills the wet tank, the dryer removes moisture from the air in the tank, and then the clean air flows to the springs. Both are part of the same system, but they do different jobs.