Skyjacker lifts raise your vehicle's frame and suspension to increase ground clearance and accommodate larger tyres

Skyjacker is a manufacturer of suspension lift kits—systems that replace or modify your vehicle's springs, shocks, and related components to raise the entire chassis higher off the ground. The lift itself does not add power or change how your engine works. Instead, it creates space between your vehicle and the road, which lets you fit larger tyres, clear obstacles that would otherwise catch the undercarriage, and change the angle at which your suspension operates.

Skyjacker kits come in different heights, typically ranging from 2 to 6 inches, depending on the vehicle model and the specific product line. A 2-inch lift is often called a "mild" lift and is common on trucks used for both street and light off-road driving. A 4 to 6-inch lift is more aggressive and is usually chosen by owners who plan serious off-road use or want a more dramatic appearance. The height you choose affects not only how your vehicle looks but also how it handles, what it costs to install, and what other modifications you may need to make.

Key Takeaways

  • Skyjacker lifts raise your frame and suspension to create clearance for larger tyres and rough terrain, but they do not increase engine power.
  • Lift heights range from 2 to 6 inches, with smaller lifts suitable for street use and larger ones for serious off-road driving.
  • Installation requires removing and replacing suspension components and typically costs between $1,500 and $4,000 in labour, depending on lift height and vehicle type.
  • A lifted vehicle handles differently—it sits higher, has a higher centre of gravity, and may need adjustments to steering, braking, and driveline angles.
  • Skyjacker offers different product lines (Softride, Coilover, Nitro) designed for different uses, from daily driving to extreme off-road conditions.

How Skyjacker lifts change your suspension geometry

Your vehicle's suspension is engineered as a system. The springs support the weight of the chassis, the shocks absorb bumps, and the angles of the steering and driveline are set to work together at a specific ride height. When you raise the frame, all of those angles change. The steering geometry becomes steeper, the driveline angles shift, and the springs and shocks operate in a different range of compression and extension.

Skyjacker kits are designed to account for these changes. A complete kit includes new springs (either coil springs or leaf springs, depending on your vehicle), new shocks tuned for the higher ride height, and often new brackets, bushings, and hardware to reconnect everything at the new angles. The manufacturer tests each kit on the specific vehicle it is designed for, so a Skyjacker lift for a Chevrolet Silverado is not the same as one for a Ford F-150, even if both are 4-inch lifts.

The quality of this engineering matters. A poorly designed lift can cause your steering to feel vague, your brakes to fade, or your driveline to bind and wear prematurely. Skyjacker's reputation in the aftermarket suspension industry is built on the idea that a lift should not just look good—it should preserve or improve how the vehicle actually drives.

Skyjacker product lines and what they are built for

Skyjacker makes several different suspension systems under different brand names, each with a different purpose. The Softride line uses coil springs and is designed for street trucks—vehicles that spend most of their time on pavement but may see light off-road use. Softride kits tend to offer a smoother ride on the highway and are often chosen by owners who want the look of a lifted truck without sacrificing comfort on daily commutes.

The Coilover line combines coil springs with adjustable shock absorbers. This setup lets you fine-tune how stiff or soft the suspension feels and gives you more control over ride height. Coilovers are popular with owners who want to dial in their suspension for a specific use—say, a weekend trip to the desert—and then adjust it back for street driving.

The Nitro line is Skyjacker's heavy-duty off-road product. Nitro shocks are built to handle repeated impacts at high speeds over rough terrain. If you plan to do serious rock crawling, desert racing, or backcountry travel, a Nitro-equipped lift is designed to survive that use. It will cost more than a Softride kit, but the shock absorbers are engineered for a different job.

What changes when you install a lift

Installation of a Skyjacker lift requires removing the wheels, unbolting the existing suspension components, and installing the new springs, shocks, and hardware. On a truck with a solid rear axle, this is a straightforward job. On a vehicle with independent front suspension, the work is more involved because you have to disconnect and reconnect steering components and may support the angles are correct.

Most owners have a lift installed by a shop that specializes in suspension work. The labour cost varies widely depending on the lift height, the vehicle, and the shop's location and experience. A 2-inch lift on a truck might take 4 to 6 hours of labour. A 4 to 6-inch lift with additional modifications (like new brake lines or driveline work) can take 12 to 20 hours. You should expect to pay for the kit itself plus installation labour; the total cost is typically between $1,500 and $4,000 in labour alone, plus the cost of the kit.

Once the lift is installed, your vehicle will need a wheel alignment. The suspension geometry has changed, and the steering and suspension angles must be reset so your tyres wear evenly and your steering feels centred. This is not optional—skipping alignment will cause rapid and uneven tyre wear and can make the vehicle unsafe to drive.

How a lifted vehicle handles differently on the road

A lifted vehicle sits higher, which means its centre of gravity is higher. This affects how it behaves in corners, during emergency manoeuvres, and in crosswinds. The vehicle will lean more in a turn, and it may feel less stable on a highway in strong wind. This is not dangerous if you understand it and adjust your driving—it straightforward means you should take corners a bit slower and be aware that the vehicle is not as planted as it was before.

Braking performance can also change. If the lift is very tall and you have not upgraded the brakes, the vehicle's weight transfer during hard braking may be more pronounced, and the front end may dive more noticeably. Some owners upgrade to larger brake rotors or higher-performance pads when they lift their vehicle, especially if they plan to tow or drive in mountainous terrain where braking is frequent.

Steering feel often becomes lighter and less responsive because the steering geometry has changed. Some owners like this; others find it takes getting used to. If you find the steering too vague after a lift, a shop can often adjust the steering box preload or recommend a steering stabilizer to improve feel.

Tyre and wheel changes that usually come with a lift

Most owners lift their vehicle specifically so they can fit larger tyres. A 2-inch lift might allow you to go from 31-inch to 33-inch tyres. A 4-inch lift opens the door to 35-inch or even 37-inch tyres on some trucks. Larger tyres increase rolling resistance, which reduces fuel economy and can make the engine work harder on the highway. They also change your speedometer reading—a 35-inch tyre makes your actual speed slightly lower than what the speedometer shows.

Larger wheels and tyres also add weight to the vehicle, which increases the load on the suspension, brakes, and engine. If you are planning a significant tyre upgrade along with your lift, discuss it with the shop installing the lift. They may recommend stiffer springs or upgraded shocks to handle the extra weight, or they may suggest that your current lift kit is not the right choice for the tyre size you want.

Driveline and steering modifications that may be needed

On a truck with a solid rear axle, a lift can change the angle of the driveshaft—the shaft that connects the transmission to the rear axle. If the angle becomes too steep, the driveshaft can vibrate or wear prematurely. On larger lifts (4 inches or more), a shop may need to install a driveshaft spacer or shim to correct the angle. This is a relatively inexpensive fix but is often overlooked by shops that do not specialise in suspension work.

On the front end, a lift can affect the steering linkage and the angles of the front axle. If you have a solid front axle (common on older trucks), the lift may require new steering geometry correction. If you have independent front suspension, the shop will need to may support that the suspension arms are still at the correct angles after the lift is installed. This is why it is important to have the alignment done by someone who understands lifted vehicles.

Warranty and long-term durability considerations

Installing a suspension lift will void the manufacturer's warranty on your suspension and may affect the warranty on other components. Your vehicle's manufacturer designed the suspension to work at a specific height, and changing that height means the suspension is no longer operating as designed. If something fails, the manufacturer may refuse to cover it under warranty.

Skyjacker kits themselves typically come with a warranty that covers defects in materials and workmanship, but not wear and tear or damage from off-road use. The length and terms of this warranty vary by product line and should be reviewed before you purchase. A shop that installs the kit should also warrant their installation work—typically for one year or a certain number of miles.

Over time, a lifted vehicle will experience more wear on suspension components than a stock vehicle, straightforward because the suspension is working at different angles and under different loads. Regular inspection of shocks, springs, bushings, and steering components is important. Many owners of lifted vehicles have their suspension inspected annually, especially if they use the vehicle off-road.

Frequently Asked Questions

Will a Skyjacker lift affect my fuel economy?

Yes, typically it will reduce fuel economy. The higher ride height increases aerodynamic drag, and if you install larger tyres (which most owners do), the rolling resistance increases further. The reduction is usually 10 to 20 percent, depending on the lift height, tyre size, and how you drive. Highway driving is affected more than city driving.

Can I install a Skyjacker lift myself?

It is possible if you have suspension experience and the right tools, but most owners have it done by a shop. The work requires removing and reinstalling critical safety components, and mistakes can affect steering, braking, and stability. A professional installation also comes with a warranty on the labour.

Do I need to modify my brakes when I lift my vehicle?

Not always, but it depends on the lift height and how you use the vehicle. A 2-inch lift on a light-duty truck may not require brake upgrades. A 4 to 6-inch lift, especially if you are adding larger tyres and towing, often benefits from upgraded brakes. A shop can advise you based on your specific vehicle and plans.

What is the difference between a Skyjacker Softride and a Nitro lift?

Softride is designed for street trucks and offers a smoother highway ride. Nitro is built for off-road use and features heavier-duty shocks designed to handle repeated impacts at speed over rough terrain. Nitro kits cost more but are engineered for a different purpose. Choose based on how you actually plan to use the vehicle.

Will a lift make my vehicle sit level if it sags in the rear?

Yes. Many trucks sag slightly in the rear under load because the factory suspension is a compromise between empty and loaded weight. A lift kit, especially one with stiffer springs, can restore or improve the level stance. This is one reason owners choose lifts even if they do not plan to go off-road.