A steering information fault means your power steering system has detected a problem and shut down or limited its own function

When your dashboard shows a steering information fault warning, your car's power steering system has either stopped working or is operating in a reduced mode. This is a safety system doing its job — it shuts down rather than risk giving you false information or no information when you need it most. The fault could be electrical (a sensor failure, a wiring break, a blown fuse), mechanical (low fluid, a failing pump, a broken belt), or software-related (a control module that has lost communication with other parts of the system).

You can still steer the car, but it will feel much heavier, especially at low speeds and when parking. This is not a minor inconvenience — it changes how the car handles and increases the physical effort you need to turn the wheel. Driving with a steering information fault is legal in most places, but it is not safe to ignore, because the underlying problem often gets worse and can eventually leave you with no power information at all.

Key Takeaways

  • A steering information fault warning means your power steering system has detected a failure and reduced or shut down its own function to prevent unsafe operation.
  • The car remains drivable but steering becomes heavy, especially at low speeds and during parking, requiring more physical effort from the driver.
  • Common causes include low power steering fluid, a failing pump, a broken serpentine belt, a faulty sensor, or a control module communication error.
  • You should have the system scanned with a diagnostic tool to read the specific fault code, which narrows down whether the problem is electrical, mechanical, or fluid-related.
  • Continuing to drive with a steering information fault risks complete loss of power steering and can damage the pump or other components if the underlying cause is not addressed.

Why the system shuts itself down

Power steering relies on three things working together: fluid pressure, a pump to create that pressure, and electrical sensors and controls to manage how much information the system provides. If any of those three fails, the system cannot know whether it is giving you the right amount of help or the wrong amount. Rather than guess and potentially make steering worse, the system defaults to mechanical steering only — no power information.

This is the same logic that makes your car's stability control light come on when a wheel speed sensor fails. The system is saying: "I cannot trust my own input, so I am stepping out of the way." It is a fail-safe, not a failure. But like any warning light, it points to a real problem underneath that will not fix itself.

The most common causes and what they feel like

Low power steering fluid is the easiest diagnosis. If the fluid level is below the minimum mark on the reservoir (usually under the hood, labeled with a steering wheel icon), the pump cannot build pressure. You may notice the steering getting heavier gradually over days or weeks, or you may see a small puddle under the car. Check the fluid level when the engine is cold, and look for leaks around the pump, hoses, and the steering rack itself.

A failing power steering pump makes a whining or groaning noise that gets louder when you turn the wheel. The pump may still produce some pressure, but not enough for the system to trust, so the fault triggers. Pump failure usually happens after many years of use, especially if the fluid has not been changed regularly or if the system has been low on fluid for a long time.

A broken serpentine belt stops the pump from spinning. If the belt snaps, you lose power steering when ready and the warning light comes on right away. You may also lose power to the alternator and air conditioning compressor at the same time, depending on which belt broke. A belt that is cracked or fraying will eventually snap, so if you see visible damage, replace it before it fails completely.

A faulty sensor or wiring problem sends bad data to the steering control module. Common sensors include the steering angle sensor (which tells the system how much you have turned the wheel) and the pressure sensor (which measures fluid pressure). A corroded connector, a pinched wire, or a sensor that has drifted out of calibration can all trigger a fault code without any mechanical damage to the pump or fluid system.

A control module communication error happens when the steering module loses contact with the engine control module or other networked systems. This is often caused by a weak battery, a corroded ground connection, or a software glitch. Disconnecting and reconnecting the battery for 15 minutes sometimes clears the fault temporarily, but if it comes back, the underlying electrical problem needs diagnosis.

How to read the fault code

The warning light tells you something is wrong, but it does not tell you what. To narrow it down, you need a diagnostic scanner — a tool that reads the specific fault code stored in the steering system's memory. Many auto parts stores offer free scanning, or you can take the car to a mechanic or dealership.

The code will be something like P0A00 (power steering control module fault), C1241 (steering angle sensor out of range), or P0551 (power steering pressure sensor malfunction). Once you have the code, you know whether to check the fluid level, listen for pump noise, inspect the belt, or look for electrical problems. This saves you from guessing and paying for repairs you do not need.

Write down the code and any additional information the scanner provides — it may tell you whether the fault is current (happening right now) or stored (happened once and the system recovered). A stored fault that does not come back might be a one-time electrical glitch, but a current fault means the problem is active and needs attention soon.

What happens if you ignore it

Driving with a steering information fault is not when ready dangerous if the underlying cause is just a sensor error or a minor electrical issue. But if the cause is low fluid, a failing pump, or a broken belt, the problem gets worse over time. Low fluid levels allow air to enter the system, which makes the pump work harder and wear out faster. A pump that is already failing will eventually seize completely, leaving you with no power information at all.

Complete loss of power steering is not a safety emergency on a highway at speed — the car is still steerable, just heavy. But it is a serious problem in parking lots, at low speeds, and in tight spaces where you rely on power information. You also risk damaging the pump beyond repair if you keep driving it while it is starved of fluid or running dry.

The longer you wait, the more expensive the repair becomes. A fluid top-up costs almost nothing. A pump replacement costs several hundred dollars. Waiting until the pump fails and damages the steering rack can cost over a thousand.

Steps to take right now

First, check the power steering fluid level. Open the hood, locate the power steering reservoir (it usually has a steering wheel symbol on the cap), and check the level against the minimum and maximum marks on the side. If it is low, top it up with the correct fluid for your car — check your owner's manual or the cap itself for the type. Do not overfill.

Second, look under the car for leaks. If the pavement where you park has wet spots, trace them back to the source. A small drip from the pump seal or a hose connection is common and usually fixable. A large leak or fluid spraying from a hose means do not drive the car — have it towed to a mechanic.

Third, get the fault code read. Take the car to an auto parts store for free scanning, or schedule a diagnostic appointment with a mechanic. Bring the code and any notes about when the warning light came on and what the steering felt like at the time.

Fourth, do not ignore the warning. Even if the steering feels normal and the fault code is vague, the system detected something wrong. Continuing to drive without diagnosis risks a breakdown or loss of power information at an inconvenient or unsafe moment.

When to call a mechanic versus a dealership

A independent mechanic can diagnose and repair most steering information faults at a lower cost than a dealership. They can replace pumps, belts, hoses, and sensors, and they can troubleshoot electrical problems. If the fault is a straightforward sensor replacement or a fluid leak, an independent shop is usually your best option.

A dealership is the right choice if the fault code points to a control module problem or if the car is still under warranty. Dealerships have factory diagnostic software and can reprogram modules if needed. They also have access to technical service bulletins — documents that describe known problems and fixes for specific car models. If your car has a history of steering information faults, a dealership can tell you whether there is a known issue and whether a software update or recall applies.

Frequently Asked Questions

Can I drive the car to the mechanic with a steering information fault?

Yes, as long as the steering feels normal and you are not losing fluid. Avoid highways and heavy traffic if possible, and keep your speed moderate. If the steering feels heavy or the warning light is flashing rather than steady, do not drive — have the car towed instead.

What if the fault code is about the steering angle sensor?

A steering angle sensor that is out of range usually means the sensor has drifted out of calibration or there is a wiring problem. Some mechanics can recalibrate the sensor without replacing it, which is cheaper than a new sensor. Others may need to replace it. Get a quote before authorizing the repair.

Does low power steering fluid always cause a fault warning?

Not always. The system may trigger a pressure fault code if the fluid is too low to build pressure, but some cars do not have a low-fluid sensor and will only warn you if the pump starts to fail. Check the fluid level regularly as part of routine maintenance to catch a slow leak before it causes a fault.

Will disconnecting the battery clear the steering information fault?

Disconnecting the battery for 15 minutes may clear the fault code temporarily, but it will come back if the underlying problem is not fixed. This is a temporary troubleshooting step, not a repair. Use it only to see whether the fault is a one-time electrical glitch or a persistent problem.

Is a steering information fault covered under warranty?

Most steering system components are covered under the powertrain or general warranty for three years or 36,000 miles, whichever comes first. Some manufacturers extend coverage for the steering control module. Check your warranty documents or contact the dealership to confirm what is covered on your specific car.