Superpro is an aftermarket suspension brand that makes replacement bushings, control arm kits, and steering components for older and classic vehicles

Superpro manufactures suspension parts designed to restore or improve how a vehicle handles by replacing worn rubber bushings and worn steering linkage. The company focuses on vehicles from the 1960s through early 2000s, particularly British Leyland, Jaguar, and other European makes, though they also produce parts for American and Japanese vehicles. Their parts are sold through specialty retailers and online suppliers rather than through dealerships.

Superpro parts are not original equipment — they are aftermarket replacements. Some are direct substitutes for factory parts that have worn out or cracked. Others are performance upgrades, meaning they change how the suspension behaves compared to the original design. Understanding which type you are looking at matters, because a worn bushing that needs replacement is different from a bushing you are choosing to upgrade.

Key Takeaways

  • Superpro makes bushings, control arm assemblies, and steering parts for vehicles that are difficult to find original parts for, particularly older European cars.
  • Replacement bushings restore worn suspension to original behavior, while performance bushings change how the car handles and may make the ride firmer.
  • Installation requires removing suspension components and often pressing old bushings out and new ones in, which usually needs a shop with a press or specialized tools.
  • Superpro parts are sold through specialty retailers and online suppliers, not through car dealerships or major chain stores.

What Superpro suspension parts actually replace

Suspension bushings are rubber or polyurethane sleeves that sit between metal parts and absorb movement and vibration. Over time, rubber bushings crack, compress, and allow metal-to-metal contact. When that happens, you feel clunking, the steering becomes loose, and the car no longer tracks straight. Superpro replacement bushings restore that connection by filling the gap with new material.

Superpro also sells complete control arm assemblies — the metal arms that connect the wheel to the frame and allow it to move up and down. On older cars, finding a used arm in good condition is difficult, and new original parts may not exist. Superpro control arms come with bushings already installed, so you replace the whole assembly rather than trying to press out old bushings.

The company also makes tie rod ends, ball joints, and steering dampers. These are the parts that connect your steering wheel input to the wheels themselves. When they wear, the steering becomes vague and the car wanders on the highway.

Replacement bushings versus performance upgrades

Superpro makes two categories of bushings: those designed to match original specifications, and those designed to be stiffer and reduce suspension movement. A replacement bushing restores the car to how it handled when new. A performance bushing (often made of polyurethane instead of rubber) reduces flex in the suspension, which can improve cornering but usually makes the ride firmer and may transmit more road noise into the cabin.

If you are replacing a worn bushing because the car is clunking or loose, you want a replacement bushing that matches the original. If you are upgrading a car you plan to drive hard or autocross, you might choose a performance bushing. The part number and product description will tell you which type you are buying — look for language like "performance" or "polyurethane" for upgrades, and "replacement" or "OEM equivalent" for restoration parts.

How Superpro parts are installed

Installing Superpro bushings and control arms requires removing the suspension component from the car. On some vehicles this is straightforward — unbolt the control arm, take it to a shop with a hydraulic press, press out the old bushing, press in the new one, and bolt it back. On others, the component is welded or requires removing other parts first.

Most independent shops and suspension specialists can install Superpro parts. Chain tire shops and dealerships often will not, because the work is not in their standard service menu. Before ordering parts, call a local shop that works on your vehicle type and ask whether they have installed Superpro parts before and what the labor cost will be. Some shops charge by the hour; others charge a flat rate per bushing or control arm.

You will need the part number and vehicle year, make, and model to order correctly. Superpro publishes fitment guides on their website and through retailers. If you are unsure which part fits your car, contact the retailer or the shop that will install it — they can confirm before you buy.

Where to buy Superpro suspension parts

Superpro parts are not sold through dealerships or major chain retailers. They are available through specialty online retailers that focus on classic cars or British vehicles, and through some independent suspension shops. Common sources include British car specialists, European car forums that have vendor relationships, and general classic car parts suppliers.

Prices vary by part and retailer. A single bushing kit might cost $20 to $60. A complete control arm assembly might cost $150 to $400. Shipping is usually reasonable because the parts are small and light. Before ordering, confirm the part number matches your vehicle year and model, because Superpro makes different versions for different generations of the same car.

Signs your suspension bushings need replacement

Worn bushings produce specific symptoms. You may hear a clunking or knocking sound from the front or rear suspension when driving over bumps or when turning. The steering may feel loose or vague — the car does not respond when ready when you turn the wheel, or it wanders on the highway. The car may sit lower on one side, or the wheels may not be aligned even after a recent alignment.

A mechanic can confirm worn bushings by lifting the car and grabbing the control arm or tie rod end and moving it by hand. If there is excessive play or movement, the bushing is worn. A visual inspection under the car will show cracked or missing rubber. If you see metal-to-metal contact where a bushing should be, replacement is necessary.

Frequently Asked Questions

Do I need to replace all the bushings at once?

No. You can replace bushings one at a time as they wear. However, if multiple bushings are worn, replacing them all at once reduces labor costs because the shop does not have to remove and reinstall components multiple times. Many shops recommend replacing both sides of the suspension together for even handling.

Will Superpro parts fit my car if it is not a British Leyland?

Superpro makes parts for many vehicle types beyond British cars. Check the product listing or fitment guide for your specific year, make, and model. If your car is not listed, contact the retailer or manufacturer to confirm compatibility before ordering.

Can I install Superpro bushings myself?

Some bushings can be replaced at home if you have a hydraulic press and the right tools, but most require a shop. Pressing bushings in and out by hand is difficult and risks damaging the component. A shop with a press can usually do the work in an hour or two per bushing.

Are Superpro parts better than original parts?

Replacement Superpro bushings restore the car to original behavior. Performance versions may improve handling but change the ride. Original parts, if available, are usually the same quality — Superpro exists because original parts are often unavailable for older vehicles, not because they are superior.

How long do Superpro bushings last?

Rubber replacement bushings typically last 5 to 10 years depending on driving conditions and climate. Polyurethane performance bushings often last longer but may harden over time. The lifespan depends more on how much you drive and the weather where you live than on the brand.