The suspension button adjusts how much the front fork compresses when you ride

The front suspension button on the Velotric Fold 1 Plus controls the lockout feature of your front fork. When you press it, the button locks the suspension in place so the fork does not compress at all. When you release it, the suspension moves freely again. This is a mechanical on-off switch, not a dial — it either locks or it does not.

The button sits on the left side of the handlebars, within thumb reach while you grip the bar. You will feel it click when you press it. The purpose is to give you control over when your fork absorbs bumps and when it stays rigid, depending on what surface you are riding on and how much energy you want to waste fighting suspension movement.

Key Takeaways

  • The suspension button locks the front fork solid when pressed and unlocks it when released, giving you two riding modes instead of one.
  • Lock the suspension on smooth pavement or when climbing hills to reduce energy loss from fork compression.
  • Unlock the suspension on rough ground, gravel, or trails to let the fork absorb impacts and improve traction.
  • The button is a straightforward mechanical switch with no battery or electronics — it works the same way every time you press it.

When to lock the suspension

Lock the suspension when you are riding on smooth, predictable surfaces where bumps are small or nonexistent. This includes paved roads, smooth bike paths, and well-maintained pavement. Locking the fork keeps it from compressing under your weight and pedaling motion, which means less energy is wasted in the suspension and more of your effort goes into forward motion.

Locking is also useful when climbing hills. A moving suspension absorbs some of your pedal power as it compresses and extends. On a steep climb where every bit of efficiency matters, locking the fork keeps all your effort directed upward. Once you reach the top or transition to flat ground, you can unlock it again.

When to unlock the suspension

Unlock the suspension whenever you encounter rough or uneven ground. This includes gravel paths, dirt trails, potholes, curbs, and any surface with impacts larger than a few millimeters. An unlocked fork compresses when it hits a bump, absorbing the impact instead of transferring it to your wrists, arms, and spine. This makes the ride more comfortable and gives your tires better contact with the ground, which improves traction and control.

Unlock the suspension for any off-road riding or urban riding where you cannot predict the surface. The Velotric Fold 1 Plus is a folding commuter bike, so you may switch between paved streets and rougher paths in a single trip. Unlocking gives you the flexibility to handle both without stopping to adjust anything.

How to press the button correctly

The button requires a deliberate press — a light touch will not engage it. Use your thumb while holding the handlebars normally. Press firmly until you feel the click. You should hear or feel a distinct mechanical response. If you are not sure whether the button is locked or unlocked, press it again and listen for the click.

The button does not require any special technique or timing. You can press it while moving or while stopped. There is no delay between pressing and the fork responding — the change is when ready. If you are riding and want to switch modes mid-ride, it is safe to do so, though it is easier to press the button when you are not navigating a technical section.

Maintenance and troubleshooting

The suspension button is a mechanical part with no electronics, so it requires minimal maintenance. Keep the button and the area around it clean and dry. If dirt or grime builds up, wipe it away with a dry cloth. Do not spray water directly at the button or soak it.

If the button stops clicking or feels stuck, the lockout mechanism may need adjustment or lubrication. Check the Velotric manual for your model or contact Velotric support for guidance. Do not force the button if it feels jammed — forcing it can damage the internal mechanism. If the fork is not responding to the button (compressing when it should be locked, or not compressing when it should be unlocked), the issue is likely in the fork itself, not the button, and you should have the fork inspected by a bike mechanic.

Suspension button versus full suspension bikes

The Velotric Fold 1 Plus has a front suspension fork only — there is no rear suspension. The suspension button controls only the front fork. This is typical for commuter and hybrid bikes, which prioritize efficiency and simplicity over the comfort of a full-suspension setup. A front fork is enough to handle the bumps of urban riding and light trails.

Full-suspension bikes have both front and rear suspension and are heavier and more expensive. They are designed for serious mountain biking or rough terrain. For a folding commuter bike, front suspension with a lockout button is the right balance between comfort and practicality.

Frequently Asked Questions

Can I ride with the suspension locked all the time?

Yes, you can, but you will feel every bump in the road and your wrists and arms will absorb more impact. On smooth pavement it is fine. On rough surfaces, unlocking the suspension will make the ride noticeably more comfortable and give you better control.

Does locking the suspension make the bike faster?

Locking reduces energy loss from fork compression, so you waste less effort. On smooth ground or climbs, this can make a small difference in speed or efficiency. On rough ground, the difference is negligible because the fork is not compressing much anyway.

What happens if I forget to unlock the suspension on a rough trail?

The fork will not compress, so you will feel every bump and your traction will be worse. It is uncomfortable but not dangerous. As soon as you unlock it, the fork will respond normally again. There is no damage from riding locked on rough ground.

Is the suspension button the same as suspension on other bikes?

Most front suspension forks have a lockout feature, but not all have a button on the handlebars. Some require you to reach down to the fork itself or use a remote lever. The Velotric button is convenient because you can operate it without letting go of the bars.

Do I need to adjust the suspension button seasonally?

No. The button is a straightforward mechanical switch that works the same way year-round. You only need to press it based on the terrain you are riding, not the season or weather.