Your tire size is printed on the sidewall of your tire, on a sticker inside your driver's door jamb, and in your owner's manual

You do not need to remove your tire or buy anything to find your tire size. The information is already on your vehicle in at least two places, and you can read it in under a minute. Most people find it fastest by looking at the sticker on the inside of the driver's side door, where the manufacturer lists the correct size for your car.

Knowing your tire size matters because it affects how your speedometer reads, how your car handles, and whether a tire will even fit on your wheel. If you buy the wrong size, you may damage your suspension, throw off your braking distance, or create a safety problem. The size is not a suggestion—it is a specification your vehicle was engineered around.

Key Takeaways

  • The tire size label on your driver's door jamb is the fastest place to look, and it shows the exact size your manufacturer recommends.
  • The sidewall of any tire on your car displays the size in a code like 225/65R17, which you can read without tools.
  • Your owner's manual lists the correct tire size in the specifications or maintenance section, usually near the front or back.
  • The three numbers and letters in a tire size code tell you the width, sidewall height, and wheel diameter—each one matters for fit and safety.

Check the Driver's Door Jamb First

Open your driver's side door and look at the frame where the door closes. You will see a white or silver sticker, usually about the size of a credit card. This sticker is called the tire placard, and it lists the tire size your manufacturer recommends for your vehicle.

The placard shows the size in a format like 225/65R17 or P215/60R16. It also shows the correct air pressure for your tires, the maximum load your tires can carry, and sometimes the spare tire size if your car has one. This sticker is the most reliable source because it reflects what your specific car was designed for.

If the sticker is missing or unreadable, the information is usually repeated on the inside of the fuel door or on a sticker under the hood near the engine bay. Check those locations before moving on to the other methods.

Read the Size Directly from Your Tire Sidewall

Walk to any tire on your car and look at the outer edge of the rubber. You will see a series of numbers and letters molded into the sidewall. The tire size appears early in this sequence, usually within the first few inches of text. It looks like 225/65R17 or 205/55R16—a pattern of numbers, a slash, more numbers, a letter, and a final number.

You can read this code without removing the tire or using any tools. straightforward crouch down and look at the side of the tire facing outward. The size is printed in raised or recessed letters that are straightforward to spot once you know what you are looking for. If your tires are very dirty, you may need to wipe the sidewall with a cloth to read it clearly.

One important note: if your car has been in an accident or had a tire replaced, the tire on the car may not match the size on the door placard. Always use the placard size when buying new tires, not the size of the tire currently on your vehicle. The placard tells you what your car needs; the current tire may be wrong.

Understanding the Tire Size Code

A tire size like 225/65R17 is not random. Each part of the code tells you something specific about the tire, and all three pieces matter for safety and fit.

The first number (225) is the tire width in millimeters, measured from sidewall to sidewall. The second number (65) is the sidewall height as a percentage of the width—so a 65 means the sidewall is 65% as tall as the tire is wide. The letter (R) means the tire has radial construction, which is standard on all modern cars. The final number (17) is the wheel diameter in inches.

If you change any of these numbers, you change how your car handles, how fast it goes at a given engine speed, and how much weight the tire can carry. A tire that is too wide may rub against your suspension. A tire with a sidewall that is too tall or too short changes your speedometer accuracy. A tire for the wrong wheel diameter will not fit at all. This is why the placard size exists—it is the only size that works correctly with your vehicle's engineering.

Check Your Owner's Manual

If you cannot read the door placard or the tire sidewall for any reason, your owner's manual contains the tire size in the specifications or maintenance section. The manual is usually in your glove box, but you can also find a digital copy on the manufacturer's website if you search for your vehicle's year, make, and model.

The manual typically lists tire size in a table alongside other specifications like engine size, fuel capacity, and maintenance intervals. This information is the same as what appears on the door placard, so it serves as a backup source if the placard is damaged or missing.

What to Do If You Cannot Find the Size

If your door placard is missing and you cannot read the tire sidewall, contact your vehicle's manufacturer directly with your vehicle identification number (VIN). The VIN is printed on a sticker on the driver's side dashboard, visible through the windshield. The manufacturer can tell you the correct tire size in a few minutes.

You can also take your car to a tire shop and ask them to look up the size for you. They have access to manufacturer databases and can confirm the correct size based on your VIN. This service is usually free, and it takes only a few minutes.

Do not guess or use the size from a different car of the same make and model. Even two cars from the same year and model line may have different tire sizes depending on trim level or options. Always verify the size for your specific vehicle before you buy.

Why Tire Size Matters for Your Safety

Your tire size affects three critical things: how your brakes work, how your speedometer reads, and how your suspension handles weight. When you use the wrong size, you change all three.

A tire that is too large makes your speedometer read slower than you are actually going. A tire that is too small makes your speedometer read faster. Both create a safety problem because you may be going faster or slower than you think. A tire with the wrong sidewall height changes how much shock your suspension absorbs, which affects braking distance and handling in an emergency.

The placard size is not a suggestion—it is the size your vehicle was engineered to use. Sticking to it keeps your car predictable and safe.

Frequently Asked Questions

Can I use a different tire size if it fits on my wheel?

No. Just because a tire physically fits on your wheel does not mean it is safe for your car. The placard size is the only size that works correctly with your vehicle's brakes, suspension, and speedometer. Using a different size can cause handling problems, change your braking distance, and damage your suspension over time.

What if my door placard is damaged or missing?

Contact your vehicle's manufacturer with your VIN, or take your car to a tire shop and ask them to look up the correct size. Both methods take only a few minutes and are usually free. Do not guess or use the size from another car.

Does the spare tire have the same size as the regular tires?

Usually not. Spare tires are often smaller and are meant only for temporary use to get you to a repair shop. The placard lists both the regular tire size and the spare size. Check the placard to see what size spare your car uses.

If I replace one tire, do all four have to be the same size?

Yes. All four tires on your car should match the placard size. If you replace only one tire, make sure the new tire is the same size as the other three. Mixing sizes can cause handling problems and damage to your drivetrain.

Why do tire shops sometimes recommend a different size than the placard?

They should not. A reputable tire shop will always use the placard size. If a shop recommends something different, ask them to explain why in writing, and consider getting a second opinion. The placard size is the correct size for your vehicle.