Where to find the tire size on your tire
The tire size is printed on the sidewall of every tire in a standardized format. Look on the outer edge of the tire — the black rubber wall that faces outward when the wheel is mounted on your car. You'll see a long string of numbers and letters stamped into the rubber. The tire size code starts with a letter (usually P, LT, or ST) and is followed by three numbers, a slash, two more numbers, and additional characters. This entire sequence is your tire size.
The sidewall also contains other information — load rating, speed rating, tread wear warranty — but the size code is the most prominent marking and appears on both sides of the tire. You don't need to remove the tire from the car to read it; you can crouch down and read it directly from the wheel well, though a flashlight helps in dim light.
Key Takeaways
- Tire size is stamped on the outer sidewall of every tire and follows a standard format that begins with a letter and includes numbers separated by a slash.
- The first number is the tire width in millimeters, the second number after the slash is the aspect ratio (sidewall height as a percentage of width), and the final number is the wheel diameter in inches.
- You can read your tire size without removing the tire — straightforward look at the sidewall facing outward on any wheel, or check your owner's manual or driver's door jamb for the recommended size.
- The letter at the start (P, LT, or ST) indicates the tire type: P for passenger vehicles, LT for light trucks, and ST for trailers.
Breaking down the tire size code
A typical tire size looks like this: P215/65R16. Each part of this code tells you something specific about the tire's dimensions and construction.
The P at the beginning means this is a passenger tire (designed for cars, sedans, and small crossovers). LT means light truck, and ST means special trailer. This letter matters because it affects how the tire is built and what load it can safely carry.
The 215 is the tire width in millimeters, measured from sidewall to sidewall when the tire is mounted and inflated. The 65 is the aspect ratio — the sidewall height expressed as a percentage of the width. So a 65 aspect ratio means the sidewall is 65% as tall as the tire is wide. The R means radial construction, which is standard on all modern tires. The 16 is the wheel diameter in inches — the size of the metal rim the tire fits onto.
After the basic size code, you'll often see additional numbers and letters. A load index (a two-digit number) and speed rating (a single letter) appear next. These tell you the maximum weight the tire can carry and the maximum speed it's rated for, but they're separate from the size itself.
Why tire size matters for your car
Using the correct tire size is a safety issue, not a preference. Your car's handling, braking distance, speedometer accuracy, and fuel economy all depend on the tire size matching what the manufacturer specified. Installing a significantly different size can throw off your speedometer, cause your anti-lock brakes to work incorrectly, and put stress on your suspension and drivetrain.
The correct size for your vehicle is listed in three places: your owner's manual, a sticker on the driver's door jamb (inside the door frame), and sometimes on the fuel door. The door jamb sticker is usually the fastest place to check. The size listed there is what the manufacturer tested and approved for your specific car, taking into account weight, suspension geometry, and safety systems.
If you're replacing a tire and the sidewall size doesn't match what's on your door jamb, you have the wrong tire. Don't install it. Return it and get the correct size, even if the incorrect tire is cheaper or more readily available.
Finding tire size if the sidewall is worn or damaged
If the sidewall markings are too faded or damaged to read clearly, your owner's manual will always have the correct tire size listed. Check the section on maintenance or specifications. You can also look inside your fuel door or on the driver's door jamb sticker — these locations are protected from weather and the markings usually remain legible much longer than the tire sidewall itself.
If you've lost your manual, the vehicle's VIN (vehicle identification number) can be used to look up the original specifications online through the manufacturer's website or through automotive databases. Your VIN is printed on your registration, insurance card, and on a small plate on the dashboard visible through the windshield on the driver's side.
Common tire size formats and what they mean
Most passenger cars use the P-metric format described above. However, you may encounter other formats depending on your vehicle's age or type.
LT (Light Truck) format looks similar but is built heavier and carries a higher load rating. An LT tire might read LT245/75R16. The numbers mean the same thing, but the tire construction is reinforced for trucks and SUVs that carry heavier loads.
Metric format without the P (like 215/65R16) is common on imported vehicles. This is functionally the same as P-metric; the P is straightforward omitted. Both are passenger tires.
Older inch-based format (like 7.50-16) uses inches instead of millimeters and appears on vintage or classic vehicles. If your car uses this format, a tire shop can help you convert it to modern metric sizing or source period-correct replacements.
What to do once you've found your tire size
Once you know your tire size, write it down or take a photo of the sidewall marking. Keep this information in your phone, your glove box, or your wallet. When you need new tires, you'll have the exact size to give to a tire shop, and you can verify that the replacement tires match before they're installed.
If you're shopping online for tires, the size code is how you filter and search. Entering the wrong size will show you incompatible tires. If you're unsure whether a tire is the right size, compare the code on the tire to the code on your door jamb sticker — they must match exactly.
Frequently Asked Questions
Can I use a different tire size than what's on my door jamb?
No. The size on your door jamb is what your car was engineered for. Using a significantly different size can affect braking, handling, speedometer accuracy, and suspension wear. A tire shop can tell you if a slightly different size is acceptable, but the manufacturer's specification should always be your starting point.
What if my car has different tire sizes on front and rear?
Some performance cars and trucks are designed with different sizes front and rear. This is listed on your door jamb sticker, which will show two different sizes. When replacing tires, match the size to the axle — front tires get the front size, rear tires get the rear size.
Does the tire size on the sidewall ever change?
No. The sidewall marking is permanent and reflects the tire's actual dimensions. It doesn't change as the tire wears. The tire gets thinner as tread wears away, but the width, aspect ratio, and wheel diameter remain the same throughout the tire's life.
What's the difference between the tire size and the wheel size?
Tire size includes the wheel diameter as its final number (the 16 in P215/65R16). Wheel size refers only to that diameter — 16 inches. The tire wraps around the wheel, so you need both pieces of information to buy the correct tire. The tire size tells you everything; the wheel size is just one part of it.
Can I read tire size from a photo of the tire?
Yes, if the photo is clear and shows the sidewall markings directly. Take the photo straight-on at the sidewall, in good light, so the numbers are legible. This is useful if you're at a tire shop and want to verify the size before purchase, or if you're shopping online and want to double-check what you're ordering.