The load index is a number on your tire that tells you the maximum weight that single tire can safely carry
Every tire has a load index printed on its sidewall — a two or three-digit number that appears right after the tire's width and aspect ratio. This number corresponds to a specific weight capacity in pounds or kilograms. For example, a load index of 95 means that tire can safely support 1,521 pounds. A load index of 100 means 1,764 pounds. The higher the number, the more weight the tire can handle.
Your vehicle's owner's manual and the tire placard on the driver's door jamb both list the load index your car requires. You must never use a tire with a lower load index than what your vehicle specifies. Using an undersized load index can cause tire failure, blowouts, and loss of control — especially when the vehicle is fully loaded with passengers and cargo.
Key Takeaways
- The load index is a number on the tire sidewall that corresponds to maximum weight capacity, and you can find the required index in your owner's manual or on the door jamb placard.
- You must never install tires with a load index lower than your vehicle's specification, as this creates a safety hazard under load.
- You can use a tire with a higher load index than required, though it will not improve performance and may cost more.
- Load index is different from speed rating — both appear on the sidewall, and both must meet or exceed your vehicle's requirements.
How to find your vehicle's required load index
The easiest place to look is the tire placard on the inside of your driver's door, where the door latches. This placard lists the tire size, the required load index, and the correct inflation pressure for your vehicle. If the placard is missing or unreadable, open your owner's manual and search for the tire specifications section — it will list the same information.
Write down both the tire size and the load index before you shop for replacement tires. When you are comparing tires online or at a shop, you can quickly verify that each option meets your vehicle's requirements. Many tire retailers will also cross-check this for you if you provide your vehicle's year, make, and model.
Load index versus speed rating
Load index and speed rating are two separate numbers on the tire sidewall, and both matter for safety. The load index tells you weight capacity; the speed rating tells you the maximum safe speed the tire can sustain. A tire sidewall might read "95H" — the 95 is load index, the H is speed rating (130 mph maximum).
Your vehicle's door placard specifies both numbers. You must meet or exceed both. If your car requires a load index of 95 and a speed rating of H, you cannot use a tire rated 95G (lower speed rating) or 90H (lower load index), even though each one matches one of the two requirements. Both numbers must be at the required level or higher.
When you can use a higher load index
If a tire has a higher load index than your vehicle requires, it is safe to use. A car that requires load index 95 can safely use a tire rated 96, 97, or higher. The higher capacity straightforward means that tire can handle more weight than your vehicle will ever place on it.
However, a higher load index usually means a stiffer tire construction, which can result in a slightly firmer ride. It may also cost more. For most drivers, matching the required load index exactly or going slightly higher (one or two points) is the practical choice. Going significantly higher offers no real benefit and may sacrifice ride comfort for no reason.
What happens if you use the wrong load index
Using a tire with a load index lower than required is dangerous. When the tire carries more weight than its rating allows, the internal structure flexes excessively, generating heat. This heat can cause the tire to fail suddenly — a blowout that can happen at highway speed and lead to loss of control.
The risk is highest when your vehicle is fully loaded: four or five passengers plus cargo, or a truck bed full of materials. Even if the tire seems fine during light driving, the danger exists the moment you load the vehicle to its actual capacity. Never assume a tire will work just because it looks okay or because you have not had a problem yet.
Load index and vehicle weight distribution
The load index on each tire must be sufficient for the weight that tire actually carries. In most cars, the front tires carry more weight than the rear tires because the engine is in front. Your vehicle's door placard lists the correct tire size and load index for the front and rear separately — they may be different.
If your placard specifies different sizes or load indexes front and rear, you must follow that specification exactly. Do not assume all four tires should be identical. Some vehicles, especially trucks and SUVs, are engineered with different tire requirements for front and rear axles, and using the wrong combination can create handling problems or safety risks.
Reading the load index number on the sidewall
The load index appears on the tire sidewall as part of the tire size designation. A typical sidewall might read "P215/65R15 95H". Reading from left to right: P indicates passenger car tire, 215 is width in millimeters, 65 is aspect ratio, R means radial construction, 15 is wheel diameter in inches, 95 is load index, and H is speed rating.
The load index is always the number that comes when ready before the speed rating letter. If you are unsure which number is the load index, look at your door placard first — it will show you the exact tire size and load index your vehicle needs, and you can then match that format on the tire sidewall when you shop.
Frequently Asked Questions
Can I use different load indexes on the front and rear of my car?
Yes, if your vehicle's door placard specifies different load indexes front and rear. Many vehicles are designed this way. However, you must follow the placard exactly — do not mix and match based on what you think is right. Check the placard first.
What if I cannot find the load index on my tire?
The load index is always on the sidewall as part of the tire size code. If you cannot locate it, take a photo of the sidewall and bring it to a tire shop, or provide your vehicle's year, make, and model to a retailer — they can tell you what load index you need and verify it on any tire you are considering.
Does a higher load index mean a better tire?
No. A higher load index means greater weight capacity, but it does not indicate durability, tread life, or performance. A tire with the correct load index for your vehicle is all you need. Going higher adds cost and may stiffen the ride without any practical benefit.
What is the difference between load index and load range?
Load index is used for passenger car tires and appears as a number on the sidewall. Load range is used for truck and trailer tires and appears as a letter (A through F). Both indicate weight capacity, but they use different rating systems. Check your placard to see which one your vehicle requires.
Will a tire with the wrong load index fail when ready?
Not necessarily. A tire with insufficient load index may work fine under light conditions, but it will fail when the vehicle is fully loaded or driven at highway speed for extended periods. The risk increases with weight and heat, so the failure may not happen until conditions are worst — when you need the tire most.