Load Range H is a tire's weight capacity rating that tells you the maximum load that tire can safely carry at a given pressure

Every tire has a load range — a letter code that indicates how much weight that tire can support. Load Range H is one of the heavier-duty ratings, typically found on pickup trucks, vans, and vehicles that regularly carry substantial cargo or towing loads. The letter itself (A through F for passenger tires, then G and H for light truck tires) corresponds to how much weight each tire can handle when inflated to its maximum rated pressure.

The load range is printed on the tire's sidewall, usually near the size designation. If you see "LT245/75R16 Load Range H," that H tells you this is a light truck tire built to withstand heavier loads than a standard passenger tire of the same size. Understanding what that means for your vehicle matters because using the wrong load range can lead to tire failure, poor handling, and safety problems — especially if you tow or haul regularly.

Key Takeaways

  • Load Range H tires are designed for light trucks and vehicles that carry heavy loads or tow trailers, and each tire can support a specific weight at maximum pressure.
  • The load range letter appears on the tire sidewall and determines the maximum pressure the tire should be inflated to, which directly affects how much weight it can carry.
  • Using a lower load range than your vehicle requires can cause tire overheating, blowouts, and uneven wear, while oversizing the load range is generally safe but unnecessary.
  • Your vehicle's door jamb label specifies the tire size and load range your manufacturer recommends, and you should match that specification or go higher, never lower.

How Load Range H Compares to Other Ratings

Load ranges run from A (lightest) through H (heavier duty). Passenger cars typically use Load Range A, B, or C tires. Most standard pickup trucks and SUVs use Load Range D, E, or F. Load Range G and H are reserved for vehicles designed to carry or tow substantial weight — heavy-duty pickups, commercial vans, and trucks that work for a living.

The difference between Load Range G and H is the maximum pressure rating and therefore the maximum weight capacity. A Load Range H tire can be inflated to a higher pressure (often 80 psi or more) than a Load Range G tire, which means it can carry more weight. If your truck's door jamb says Load Range H, using Load Range G tires means your tires cannot safely carry the full load your truck is designed to handle.

Where to Find Your Vehicle's Load Range Requirement

Your vehicle manufacturer specifies the correct tire size and load range on a label inside the driver's door jamb — the vertical surface you see when you open the door. This label lists the recommended tire size, the load range, and the correct inflation pressure for your vehicle when it is fully loaded. This is the specification you should follow when replacing tires.

Do not rely on the tires currently on your vehicle to tell you what you need. If the previous owner installed the wrong load range, you would be perpetuating that mistake. Always check the door jamb label first. If the label is missing or illegible, your vehicle's owner's manual contains the same information, or you can contact the dealership with your vehicle identification number (VIN).

What Happens When You Use the Wrong Load Range

Using a lower load range than specified creates real safety problems. If your truck requires Load Range H but you install Load Range F tires, those tires cannot safely support the weight your vehicle is designed to carry. The tires will run hotter, wear unevenly, and are at higher risk of blowout — especially when towing or carrying a full load. The sidewalls flex more than they should, generating heat that can cause the tire to fail suddenly.

Using a higher load range than specified is generally safe but unnecessary and more expensive. A Load Range H tire will not hurt your vehicle if your truck only requires Load Range G. However, you are paying for capacity you do not need. The practical concern is that higher load range tires are often stiffer and may produce a slightly firmer ride, though this varies by tire model.

Load Range H and Inflation Pressure

Load range and inflation pressure are connected. Load Range H tires are rated to handle higher maximum pressures — often 80 psi or higher — which is what allows them to carry heavier loads. Your vehicle's door jamb label specifies the correct inflation pressure for your vehicle, and that pressure is calculated based on the load range of the tires you are supposed to use.

Never inflate a tire beyond its maximum rated pressure, which is printed on the tire sidewall itself. Never inflate below the pressure listed on your door jamb label when the vehicle is fully loaded. Underinflation causes the tire to flex excessively, generating heat and leading to premature wear and potential failure. Overinflation makes the tire ride harsh and can cause the center of the tread to wear faster than the edges.

When You Need Load Range H Tires

You need Load Range H tires if your vehicle's door jamb label specifies them. This is most common on heavy-duty pickup trucks (Ford F-250 and above, Chevrolet Silverado 2500 and above, Ram 2500 and above), commercial vans, and work vehicles designed to carry substantial cargo or tow heavy trailers regularly. If you own a standard half-ton pickup or mid-size SUV, you likely need Load Range E or F, not H.

If you plan to upgrade your truck's towing or hauling capacity beyond what it came with, do not straightforward buy Load Range H tires and assume you are safe. Your vehicle's frame, suspension, brakes, and transmission all have limits. Towing capacity is determined by the weakest component in the system, not by tire load range alone. Consult your owner's manual or a dealer before attempting to exceed your vehicle's rated capacity.

Reading the Load Range on Your Tire Sidewall

The load range appears on the tire sidewall as a single letter, usually printed after the tire size. You might see something like "LT265/70R17 Load Range H" or "LT245/75R16 H." The "LT" prefix means "light truck," which is standard for Load Range G and H tires. Some tires use a ply rating instead of a load range letter — an older system that listed the number of fabric layers — but modern tires use the letter system.

If you are shopping for replacement tires and the sidewall shows only a ply rating (like "10-ply"), ask the tire shop to confirm the load range letter. The ply rating is not the same as load range and can be misleading. A 10-ply tire might be Load Range H or Load Range G depending on its construction, so the letter designation is more reliable.

Frequently Asked Questions

Can I use Load Range G tires if my truck specifies Load Range H?

No. Load Range G tires cannot safely carry the maximum load your truck is designed to handle. They will overheat and wear prematurely under full load or towing. Always match or exceed the load range specified on your door jamb label.

Do Load Range H tires cost more than other load ranges?

Yes, Load Range H tires are generally more expensive because they use heavier-duty materials and construction. The price difference varies by brand and tire model, but expect to pay more for the added capacity and durability.

What does the maximum pressure number on the tire sidewall mean?

That is the absolute maximum pressure the tire can safely hold, not the pressure you should use. Your vehicle's door jamb label specifies the correct pressure for your vehicle. The sidewall maximum is a safety ceiling, not a target.

If I only carry light loads, do I still need Load Range H tires?

If your door jamb specifies Load Range H, you should use Load Range H tires even if you rarely carry heavy loads. The load range is part of your vehicle's engineered system. Using a lower range creates safety risk if you ever do load the truck to capacity.

How do I know if my tires are overheating from the wrong load range?

You may notice the tires feeling warm to the touch after driving, uneven wear patterns (center or edges wearing faster), or a bulge in the sidewall. If you suspect overheating, stop driving, let the tires cool, and have them inspected by a tire shop. These are signs the tires are working beyond their capacity.