Load range is a letter code that tells you the maximum weight each tire can safely carry at its rated pressure
Every tire has a load range printed on its sidewall — usually a single letter like C, D, E, or F. This letter is not about the size of the tire or how fast it can go. It tells you the maximum load capacity of that tire when it is inflated to its recommended pressure. A tire marked "D" can carry more weight than one marked "C", and an "E" can carry more than a "D".
Load range matters because using a tire with too low a load range for your vehicle can cause the tire to overheat, wear unevenly, and fail suddenly — especially on long drives or when towing. Using a tire with a higher load range than you need is fine; it straightforward means you have extra capacity you are not using. The key is knowing what your vehicle actually needs and matching it.
Key Takeaways
- Load range is a single letter (C through F on most passenger and light-truck tires) that appears on the tire sidewall and indicates maximum weight capacity at rated pressure.
- Your vehicle's door jamb label or owner's manual specifies the load range required; using a lower range risks overheating and tire failure.
- Load range is separate from tire size and speed rating; you must check all three when replacing tires.
- Light trucks and vehicles that tow or carry heavy loads often require load range E or F, while most sedans use C or D.
How to find your vehicle's required load range
Your vehicle manufacturer specifies the load range your tires must have. The easiest place to find this is on the door jamb label — open the driver's door and look at the sticker on the inside edge of the frame. It lists tire size, pressure, and load range. If the label is missing or unclear, check your owner's manual under "tire specifications" or "tire replacement".
Do not guess or assume that because your current tires work, any tire of the same size will work. Two tires of identical size can have different load ranges. For example, a 265/70R17 might come in load range D or E depending on the manufacturer and model. You must match the load range your vehicle requires, not just the size.
Understanding the load range chart
Load range letters correspond to ply rating, which is an older measurement of tire strength that the industry still uses. A higher letter means more internal reinforcement and greater load capacity. Here is what each range typically means:
| Load Range | Ply Rating | Typical Use | Example Max Load (per tire, varies by size) |
|---|---|---|---|
| C | 6 | Passenger cars, light sedans | 1,000–1,200 lbs |
| D | 8 | Sedans, crossovers, light trucks | 1,200–1,500 lbs |
| E | 10 | Trucks, SUVs, towing vehicles | 1,500–1,800 lbs |
| F | 12 | Heavy-duty trucks, commercial use | 1,800+ lbs |
The actual maximum load for any tire depends on its size and construction, so the numbers above are ranges. Always check the tire's sidewall for its specific load capacity, listed as "Max Load" in pounds or kilograms. This is the weight that single tire can carry when inflated to its rated pressure.
Why load range matters for safety and tire life
A tire with insufficient load range for your vehicle will flex too much under the weight it carries. This excess flexing generates heat inside the tire, which breaks down the rubber and internal cords faster than normal wear. Over time, this can lead to sidewall failure, blowouts, or sudden loss of pressure — often at highway speeds when you cannot safely pull over.
Underrated tires also wear unevenly. The center of the tread may wear faster because the tire is sagging under load, or the edges may wear faster if the tire is overinflated to compensate. Either way, you lose tread life and handling predictability. If you tow a trailer or regularly carry heavy loads, using the correct load range is not optional — it is a safety requirement.
Overinflating an underrated tire to try to make it work is dangerous and does not solve the problem. The tire will still flex excessively at the sidewalls, and overinflation makes the center of the tread wear faster while reducing grip and comfort. The only correct fix is to use tires with the load range your vehicle requires.
Load range versus speed rating and tire size
Load range, speed rating, and tire size are three separate specifications, and you need to match all three when buying replacement tires. A tire might be marked "225/60R17 99H D" — that breaks down as size (225/60R17), load index (99), speed rating (H), and load range (D). Each one matters.
Speed rating (the letter H, V, W, Y, etc.) tells you the maximum sustained speed the tire is designed for. Load index (the number 99) is a shorthand for load capacity that corresponds to the load range. You can have a tire with a high speed rating but a low load range, or vice versa. Always check that your replacement tires meet or exceed all three specifications listed on your vehicle's door jamb label.
Common mistakes when replacing tires
The most common mistake is buying tires based on size alone and assuming the load range will be correct. Tire shops sometimes make this error too, so always verify the load range yourself before purchase. Ask the shop to show you the sidewall marking or the product specification sheet.
Another mistake is upgrading to a larger tire size without checking whether the load range is still adequate. A larger tire might have a higher load capacity, but not always — it depends on the specific model. If you are changing tire size, confirm with your vehicle manufacturer or a tire professional that the new size and load range are compatible with your vehicle.
A third mistake is assuming that a tire rated for a heavier vehicle will work on a lighter one. While it is safe to use a higher load range than required, it is wasteful and unnecessary. You are paying for capacity you do not need. Stick with what your vehicle specifies.
How to read load range on a tire sidewall
The load range letter appears near the end of the tire size marking on the sidewall, after the speed rating. For example, on a tire marked "LT265/70R17 121/118S E", the "E" at the very end is the load range. The "LT" at the beginning stands for "light truck" and indicates the tire is designed for trucks and heavier vehicles.
Passenger tires (without "LT") typically use load ranges C or D. Light-truck tires (marked "LT") typically use E or F. If you cannot find the load range letter on the sidewall, check the tire's product information sheet or the manufacturer's website. You can also call the tire shop where you bought the tire — they have access to the full specification for any tire they sell.
Frequently Asked Questions
Can I use a tire with a higher load range than my vehicle requires?
Yes. A higher load range straightforward means the tire can carry more weight. If your vehicle requires load range D and you install load range E tires, the vehicle will work fine — you just have extra capacity. The downside is that higher load range tires often cost more and may ride slightly stiffer.
What happens if I use a tire with a lower load range than required?
The tire will overheat under your vehicle's weight, especially on long drives or when towing. This causes premature wear, uneven tread wear, and risk of blowout or sidewall failure. Do not do this. Always match or exceed your vehicle's required load range.
Is load range the same as load index?
No. Load index is a number (like 99 or 104) that corresponds to a specific weight capacity. Load range is a letter (C, D, E, F) that groups tires into categories. Both appear on the tire sidewall, and both tell you about weight capacity — they are just different systems.
Do I need a higher load range if I tow a trailer?
Possibly. Check your vehicle's door jamb label and owner's manual for the towing specification. Some vehicles specify a higher load range for towing; others do not. Never assume — the manufacturer will tell you what you need.
Can I mix load ranges on the same vehicle?
No. All four tires should have the same load range. Mixing load ranges can cause uneven wear, unpredictable handling, and safety issues. If you must replace only two tires, install them on the rear axle and keep the original pair on the front, but all four should meet your vehicle's load range requirement.