Your tire size is printed on the sidewall of every tire on your car, and also on a label inside your driver's door jamb
The sidewall of your tire carries a code like P215/65R15 or LT245/75R16. This is the actual size and type of tire mounted on your vehicle right now. The door jamb label — usually on the inside of the driver's door or the door frame itself — shows the tire size your manufacturer recommends for your car. These two may not always match, especially if you have replaced your tires, but the sidewall tells you what is actually on the road.
You need to know your tire size for three reasons: to buy replacement tires that fit your car safely, to understand load and speed ratings that affect how your tires perform, and to spot when someone has put the wrong size on your vehicle. A tire that is too small, too large, or the wrong load rating can affect your speedometer accuracy, your fuel economy, your handling, and your safety.
Key Takeaways
- Your tire size is stamped on the outer sidewall of every tire in a code like P215/65R15, and you can read it without removing the tire.
- The driver's door jamb label shows what size your manufacturer recommends, which is the safest choice for your specific car.
- Each letter and number in the tire code tells you the tire type, width, aspect ratio, construction, and wheel diameter — all of which affect how the tire performs.
- If you replace your tires with a different size, you must stay within the manufacturer's approved range or risk damaging your speedometer, suspension, and brakes.
Reading the tire sidewall code
The tire size code breaks down into distinct parts, and each one matters. A code like P215/65R15 95H reads like this: the P means passenger car tire (as opposed to LT for light truck or T for temporary spare). The 215 is the tire width in millimeters. The 65 is the aspect ratio — the height of the sidewall as a percentage of the width. The R means radial construction, which is standard on all modern tires. The 15 is the wheel diameter in inches. The 95 is the load index, which tells you how much weight that tire can safely carry. The H is the speed rating, which tells you the maximum speed the tire is designed for.
You do not need to memorize this code, but you do need to understand that changing any of these numbers changes how your tire performs. A tire that is one size larger in diameter will make your speedometer read slower than you are actually going. A tire with a lower load index than recommended can fail under your car's weight. A tire with a lower speed rating than your car's top speed creates a safety gap.
Finding the manufacturer recommendation on your door jamb
Open your driver's door and look at the frame where the door closes — usually on the inside edge of the door pillar. You will see a white or yellow label with tire and pressure information printed on it. This label shows the tire size your manufacturer tested and approved for your specific car. It also shows the correct tire pressure for your front and rear tires, which may be different.
This label is the safest reference point because your manufacturer has tested this exact tire size with your car's weight, suspension, brakes, and engine. Staying within the manufacturer's recommendation keeps your speedometer accurate, your handling predictable, and your brakes and suspension working as designed. If the label shows multiple approved sizes, all of them are safe — the manufacturer has tested each one.
Some older vehicles have the tire information on a label inside the fuel door or on the inside of the trunk lid instead. If you cannot find it on the door jamb, check those locations or look in your owner's manual, which always lists the correct tire size.
What to do if your tires do not match the door jamb label
If the sidewall code on your tires does not match the size on your door jamb label, you have a tire that does not meet your manufacturer's specification. This can happen if a previous owner replaced the tires with a different size, or if a tire shop installed the wrong size by mistake.
A tire that is slightly different — one size up or down in diameter, for example — may still be safe if it falls within the manufacturer's approved range. Many manufacturers approve two or three sizes for the same vehicle. But a tire that is significantly different can cause real problems: your speedometer will be inaccurate, your anti-lock brakes may not work correctly, your traction control may not engage properly, and your suspension and steering may feel loose or unstable.
The safest move is to replace the mismatched tire with one that matches your door jamb label. If you want to use a different size, check your owner's manual or contact your manufacturer to confirm that size is approved for your car before you buy.
Load index and speed rating matter for safety
The load index and speed rating are printed at the end of the tire code, and they are not decorative. The load index is a number that corresponds to the maximum weight one tire can carry. A tire with a load index of 95 can carry 1,521 pounds. A tire with a load index of 100 can carry 1,764 pounds. If you replace your tires with a lower load index, you are reducing the total weight your car can safely carry.
The speed rating is a letter — H, V, W, Y, and so on — that tells you the maximum speed the tire is designed for. An H-rated tire is safe up to 130 mph. A V-rated tire is safe up to 149 mph. If your car is capable of going faster than your tire's speed rating, you have created a mismatch: the tire will fail before the car reaches its limit. This is especially important if you drive a sports car or a high-performance sedan.
Your manufacturer chose a load index and speed rating that match your car's weight and performance. Replacing with a lower rating does not save money in any meaningful way — it creates a safety gap that can cause a blowout or loss of control.
Using tire size information when you shop for replacements
When you are ready to buy new tires, bring the sidewall code from your current tires or the size from your door jamb label to the tire shop. The shop can then show you tires in that exact size, or in other sizes your manufacturer approves. Do not guess at the size or rely on memory — the code is specific, and a small mistake can lead to the wrong tire.
If a tire shop suggests a different size than what is on your door jamb, ask them to show you the manufacturer's approval for that size. Reputable shops will have this information and will explain why they are recommending a change. If they cannot show you the approval, stick with the manufacturer's recommended size.
You can also find tire size information online through your car's VIN (vehicle identification number). Many tire retailers have a tool where you enter your VIN, and the system shows you all approved tire sizes for your exact year, make, and model. This is a fast way to confirm what you should be buying.
Frequently Asked Questions
Can I use a different tire size than what is on my door jamb label?
Only if your manufacturer approves it. Check your owner's manual or contact the manufacturer to confirm the size is on the approved list. Many cars have two or three approved sizes, but using an unapproved size can damage your speedometer, brakes, and suspension.
What does the R in the tire code mean?
R stands for radial construction, which is the standard for all modern passenger car and truck tires. It refers to how the tire's internal layers are arranged. You will not see any other letter in this position on a tire you can buy today.
If my door jamb label is missing or unreadable, where else can I find the tire size?
Check your owner's manual, which always lists the correct tire size. You can also contact your car's manufacturer with your VIN, or use an online tire retailer's VIN lookup tool. The sidewall of your current tires also shows the size, though that may not be the manufacturer's recommendation if the tires were changed.
Does a larger tire size make my car go faster?
No. A larger tire diameter makes your speedometer read slower than you are actually going, so you may be speeding without realizing it. It also changes your handling and can strain your suspension and brakes. Stick with the manufacturer's recommended size.
What happens if I put a tire with a lower load index on my car?
You reduce the maximum weight your car can safely carry. If your car weighs more than the tire's load rating allows, the tire can overheat, fail, or blow out. Always match or exceed the load index on your door jamb label.