Windscreen wiper arms wear out and need replacement, usually every three to five years
A windscreen wiper arm is the metal or plastic rod that holds the rubber blade and moves it across your windscreen. When the arm stops moving smoothly, leaves streaks, or sits at an odd angle, replacement is usually the fix. The arm itself — not the blade — has failed. This is different from replacing just the rubber blade, which you might do more often.
Replacement takes 15 to 30 minutes and costs between £15 and £60 per arm at a garage, or £5 to £20 in parts if you do it yourself. Most vehicles have two arms (driver and passenger side), so budget for both if both need work. The job requires no special tools beyond what comes in most home toolkits.
Key Takeaways
- Wiper arms fail when internal springs weaken or the metal bends, causing uneven pressure on the windscreen or complete loss of movement.
- You can replace an arm yourself in under 30 minutes using basic hand tools, or pay a garage £30 to £60 per arm for labour and parts combined.
- The arm clips or bolts to the wiper motor shaft under a plastic cover; removing that cover is the first step and usually requires only a flat screwdriver.
- Buying the correct arm for your vehicle model matters — arms are not universal, and fitting the wrong one will either not attach or sit at the wrong angle.
- If both arms need replacement, do both at the same time to keep wiping pressure balanced across the windscreen.
Signs your wiper arm needs replacement, not just a new blade
A worn blade leaves streaks or skips across the glass. A failing arm does something different: it moves slowly, jerks, or stops mid-stroke. You might also notice the arm sitting at an angle when parked, or the blade pressing harder on one side of the windscreen than the other. These are signs the arm's internal spring has weakened or the metal has bent.
If you replace the blade and the problem persists, the arm is the culprit. Lift the arm away from the windscreen by hand — it should move smoothly and return to rest position under spring tension. If it feels stiff, moves in jerks, or won't return to the parked position, replacement is needed.
What you need to replace a wiper arm yourself
You will need the correct replacement arm for your vehicle model, a flat-head screwdriver, a socket wrench or spanner (usually 8mm or 10mm, depending on your car), and possibly a small pry tool or old butter knife. Check your vehicle's manual or contact the parts supplier to confirm the bolt size and whether your arms clip or bolt on.
Order the arm online or buy it at a motor factors shop. Prices range from £5 to £20 per arm depending on whether you choose an original equipment manufacturer (OEM) part or an aftermarket alternative. OEM parts fit more precisely but cost more. Aftermarket arms work well if they are listed as compatible with your exact model and year.
Step-by-step replacement process
Start with the engine off and the wipers in the parked position. Locate the plastic cover or cap at the base of the wiper arm where it meets the windscreen. Prise this cover away gently with a flat screwdriver — it usually clips on and comes free with light pressure. Do not force it; if it resists, check that you are not pulling at an angle.
Underneath the cover, you will see either a bolt or a clip. If it is a bolt, use your socket wrench or spanner to remove it — usually one turn is enough to free the arm. If it is a clip, press or slide it to release the arm from the shaft. Once the fastener is loose, lift the arm straight up and away from the windscreen. It should come free without resistance.
Position the new arm on the shaft in the same angle as the old one sat. If you are unsure of the angle, check your vehicle manual or look at photos of the other arm. Align the arm so the blade will sit flat against the windscreen when parked. Reattach the bolt or clip, tightening firmly but not so hard that you crack the plastic cover. Replace the plastic cap and test the wipers by turning on the ignition and running them through a full cycle.
When to have a garage do the work
If the arm is stuck fast, the bolt is corroded or stripped, or you are uncomfortable working near the windscreen, a garage can handle it. Most charge between £30 and £60 per arm including parts and labour. Independent garages are often cheaper than main dealers, and many will fit arms you have bought yourself for a smaller labour fee.
Some vehicles have arms that are harder to access or require removing trim panels. Your garage can advise whether your model falls into this category. If you are unsure whether you have the right part or the right size bolt, a garage can also confirm this before you buy, saving you a wasted trip to the parts shop.
Choosing between OEM and aftermarket arms
Original equipment manufacturer (OEM) arms are made by the same supplier as your vehicle's original parts. They fit precisely and usually last as long as the car. Aftermarket arms are made by third-party suppliers and cost less, but quality varies. Some are excellent; others fail within a year.
Check the reviews and warranty on any aftermarket arm before buying. If the listing does not specify your exact vehicle model and year, do not assume it will fit. A £3 saving is not worth buying an arm that does not attach or sits at the wrong angle. When in doubt, buy OEM or ask the parts supplier to confirm compatibility in writing.
Frequently Asked Questions
Can I replace just one wiper arm, or do I need to replace both?
You can replace one arm, but if both are old, replace both. Wiper arms wear at similar rates, and mismatched arms create uneven pressure on the windscreen. One new arm and one old arm will wipe unevenly, leaving dry patches.
What if the bolt is stuck and will not turn?
explore penetrating oil (such as WD-40) around the bolt and wait 15 to 20 minutes. Try again gently — do not force it, as you risk stripping the bolt or damaging the shaft. If it still will not budge, a garage can remove it without risk to the windscreen or motor.
How do I know which size bolt my car uses?
Check your vehicle manual, or contact a motor factors shop with your registration number. They can tell you the bolt size and whether your arms clip or bolt on. You can also photograph the old arm and show it to the parts supplier.
Will a wiper arm from a different car model fit my vehicle?
No. Wiper arms are model-specific because the shaft diameter, bolt size, and blade attachment point vary. Fitting the wrong arm will either not attach or sit at an incorrect angle, causing poor wiping. Always order for your exact make, model, and year.
Do I need to replace the blade at the same time as the arm?
Not necessarily. If the blade is in good condition, keep it. If it is worn or streaked, replace it at the same time — blades are cheap and the arm is already off. A new arm with an old blade will wipe better than before, but a new arm and new blade together will perform best.