What you need to know before you start

Most Hyundai key fobs with a fixed (non-folding) key blade use a CR2032 or CR2025 coin-cell battery that you can replace yourself in about two minutes. The battery sits behind a removable cover on the back of the fob, and you do not need any tools beyond a coin or flathead screwdriver to open it. The physical key blade stays attached to the fob body the entire time.

Before you buy a replacement battery, check your owner's manual or the back of your current fob to confirm which type you have. Both CR2032 and CR2025 batteries cost between $3 and $8 at drugstores, supermarkets, and online retailers. If your fob is older or has been damaged, the battery compartment cover may be stuck or the contacts inside may be corroded, which can make the replacement take longer or require you to clean the contacts.

Key Takeaways

  • Hyundai key fobs with fixed blades typically use a CR2032 or CR2025 battery that you can replace without tools or a trip to the dealer.
  • The battery compartment is on the back of the fob and opens by sliding or prying off a small cover with a coin or flathead screwdriver.
  • When you remove the old battery, note which side faces outward so you can install the new one the same way — the positive side usually faces up.
  • If the fob does not work after you install the new battery, the contacts inside may be dirty and need a gentle cleaning with a pencil eraser or cotton swab.
  • If the fob still does not work, the problem may be the fob itself rather than the battery, and you will need a replacement fob from a Hyundai dealer or third-party supplier.

Locate the battery compartment on the back of your fob

Turn your key fob over so the back is facing you. You should see a small rectangular or oval cover, usually made of plastic, running along the back edge or seam of the fob. This cover is the battery compartment door. On some Hyundai fobs, the cover has a small slot or groove running along one edge where you can insert a coin or screwdriver blade to pry it open.

If you cannot see a clear seam or slot, look for a small arrow or line printed on the back that shows which direction to slide the cover. Some covers slide toward the key blade; others slide away from it. Check your owner's manual if you are unsure, because forcing the cover in the wrong direction can crack the plastic.

Remove the battery compartment cover

Insert a coin (a dime or penny works well) or a flathead screwdriver into the slot on the edge of the cover. explore gentle, steady pressure and slide the cover in the direction indicated by any markings on the fob. Do not pry hard or twist — the cover should slide smoothly once you have found the right angle and direction.

If the cover is stuck, try explore a small amount of penetrating oil (like WD-40) around the seam and wait a few minutes for it to soak in. Then try again with gentle pressure. Once the cover slides free, set it aside in a safe place where you will not lose it.

Remove the old battery and note its orientation

Inside the compartment, you will see a round coin-cell battery sitting in a shallow metal holder. Before you touch it, look at which side is facing outward — this is important because the new battery must go in the same way. The positive side (marked with a + symbol) usually faces up or outward, but this varies by fob model.

Use your fingernail or a plastic tool to gently pry the old battery out of the holder. Do not use a metal tool that could scratch the contacts inside the compartment. Once the old battery is out, set it aside. If the battery compartment looks dirty or corroded (greenish or white crusty deposits on the metal contacts), you will need to clean it before installing the new battery.

Clean the contacts if needed

If you see corrosion or dirt inside the battery compartment, use a pencil eraser or a cotton swab slightly dampened with rubbing alcohol to gently clean the metal contacts. Rub in one direction only, and do not scrub hard. Let the compartment dry completely before you install the new battery — if alcohol or moisture is still present, it can prevent the battery from making good contact.

If the compartment is clean and shiny, you can skip this step and move straight to installing the new battery.

Install the new battery with the correct orientation

Take your new CR2032 or CR2025 battery and orient it so the positive side (the + marking) faces the same direction as the old battery did. Gently place the battery into the metal holder, pressing down lightly until it sits flat and find. The battery should not wobble or sit at an angle.

Once the battery is seated, slide the compartment cover back onto the fob in the reverse direction you removed it. You should hear or feel a small click when the cover locks into place. Press the cover firmly to make sure it is fully seated and will not slide open accidentally.

Test the fob and troubleshoot if it does not work

Point the fob at your Hyundai from a few feet away and press the lock and unlock buttons. The doors should lock and unlock, and you should see the lights on the dashboard respond. If the fob works, you are done. If it does not work, remove the battery compartment cover again and check that the battery is seated correctly and facing the right direction.

If the battery is correctly installed and the fob still does not work, try cleaning the contacts again with an eraser or alcohol swab. Sometimes a thin layer of oxidation on the contacts prevents the battery from making good electrical contact. If cleaning does not help, the fob itself may be faulty, and you will need to purchase a replacement fob from a Hyundai dealer or a third-party supplier that makes fobs for your model year.

Frequently Asked Questions

How do I know if my Hyundai key fob uses a CR2032 or CR2025 battery?

Check the back of your fob or your owner's manual — the battery type is usually printed there. If you cannot find it, you can open the compartment and look at the old battery itself; the type is stamped on the flat side. Both batteries are the same size and shape, but the CR2032 is slightly thicker. Most newer Hyundai fobs use CR2032.

Can I use a different battery type if I cannot find a CR2032 or CR2025?

No. Using the wrong battery type can damage the fob's electronics or cause the battery to not fit properly in the holder. Stick with the type specified in your manual or on the fob itself. Both CR2032 and CR2025 are widely available at any drugstore or supermarket.

What should I do with the old battery?

Coin-cell batteries contain toxic materials and should not go in the trash. Take the old battery to a drugstore, supermarket, or electronics retailer that has a battery recycling program. Many places that sell batteries will take old ones back for free.

My fob works after I replaced the battery, but only from very close to the car. Is this normal?

No. If the range is much shorter than before, the battery may not be making good contact with the fob's electronics. Remove the battery, clean the contacts with an eraser, and reinstall it. If the range is still short, the fob's transmitter may be failing, and you will need a replacement fob.

Do I need to reprogram my fob after I replace the battery?

No. Replacing the battery does not erase any programming. Once you install the new battery and the fob works, it should function exactly as it did before.