Remote start installation typically costs between $300 and $1,500, depending on your vehicle, the system chosen, and whether you use a dealer or independent shop.

The wide range exists because several factors change the final bill. A basic aftermarket remote start on a straightforward vehicle might run $300 to $500 at an independent installer. A factory system retrofit on a luxury car with push-button start and multiple security layers can exceed $1,000. Dealer installations almost always cost more than independent shops, sometimes by $200 to $400 for the same hardware.

Labor time is the largest variable. A straightforward installation on a sedan with a traditional ignition takes two to three hours. A vehicle with push-button start, keyless entry integration, or a complex electrical layout can take five to eight hours. Some shops charge hourly rates ($75 to $150 per hour); others quote a flat fee for your specific vehicle model.

Key Takeaways

  • Basic aftermarket remote start systems cost $200 to $600 for the hardware alone, with labor adding $100 to $900 depending on vehicle complexity.
  • Factory-installed remote start through a dealer costs more upfront but integrates with your existing key fob and warranty.
  • Vehicles with push-button start, keyless entry, or complex security systems require longer installation and cost more than traditional ignition vehicles.
  • Independent shops typically charge $100 to $300 less than dealers for the same system on the same vehicle.
  • Getting quotes from at least two installers in your area is the only way to know your actual cost, since pricing varies widely by location and shop.

Aftermarket systems versus factory installation

An aftermarket remote start is a third-party system you add after purchase. The hardware itself costs $200 to $600 depending on features—basic models start around $200, while systems with smartphone control, GPS tracking, or two-way feedback run $400 to $600. Labor to install it ranges from $100 to $900 depending on your vehicle's electrical complexity and the installer's hourly rate.

Factory remote start is built into your vehicle from the manufacturer or added through the dealer. If your car came with it, you have nothing to pay. If you want it added after purchase, dealers typically charge $500 to $1,500 total, including both the system and installation. Factory systems integrate seamlessly with your existing key fob, your vehicle's security system, and your warranty—but you pay a premium for that integration.

Aftermarket systems are cheaper upfront but may not integrate as smoothly with your vehicle's electronics. Some aftermarket installers warranty their work for one to three years; factory installations usually carry the dealer's warranty, which may be longer.

What vehicle type and features affect installation cost

A traditional ignition vehicle—one where you turn a physical key or press a button to start the engine—is the cheapest to retrofit. The installer runs wires from the starter, battery, and ignition to the remote module. This takes two to three hours on most sedans and trucks.

A push-button start vehicle requires the installer to integrate the remote system with your car's existing electronic start module. This is more complex because the system must communicate with your vehicle's security computer. Installation often takes five to eight hours and costs $200 to $400 more than a traditional ignition retrofit.

Vehicles with keyless entry and proximity sensors add another layer. The remote start must work alongside these systems without triggering false alarms or security lockouts. Some luxury vehicles require dealer-level diagnostics to install aftermarket systems safely, which can push costs toward $1,000 or beyond.

Automatic transmissions are standard for remote start installation. Manual transmissions require additional safety modules to prevent the engine from starting in gear, adding $100 to $300 to the cost. Some installers refuse manual transmission jobs altogether because of liability concerns.

Dealer versus independent shop pricing

Dealers typically charge $100 to $400 more than independent shops for the same remote start system on the same vehicle. A dealer might quote $1,200 for a factory system retrofit; an independent shop might quote $800 to $900 for an equivalent aftermarket system with similar features.

Dealers have higher overhead, warranty obligations, and access to factory diagnostic tools. They also integrate the system into your vehicle's service history and warranty. If something goes wrong, you return to the dealer where you bought it. Independent shops have lower overhead and often charge hourly rates that reflect local labor costs.

The trade-off is support and integration. A dealer can may provide compatibility with your vehicle's factory systems and may offer longer warranty coverage. An independent shop may offer faster service and lower cost but less integration with your vehicle's original electronics. Check reviews and ask about warranty length before choosing either route.

Additional costs and hidden fees

Some installations require extra parts beyond the basic remote start module. If your vehicle needs a bypass module to disable the security system safely, that adds $50 to $150. If the installer needs to run wires through tight spaces or remove interior panels, there may be a charge for additional labor or panel removal and reinstallation.

Smartphone integration or two-way feedback systems cost more than basic remote start. A system that lets you start your car from your phone and receive confirmation it started might cost $400 to $600 for hardware alone, plus $200 to $400 in labor. GPS tracking or engine temperature monitoring adds another $100 to $200.

Some shops charge a diagnostic fee ($50 to $100) to assess your vehicle's electrical system before quoting. This fee is sometimes waived if you proceed with installation, but confirm that in writing before the shop begins work.

How to get accurate quotes for your vehicle

Call or visit at least two independent shops and one dealer in your area. Provide your vehicle's year, make, model, and transmission type. Ask each shop for a written quote that breaks down hardware cost, labor cost, and any additional fees. A good quote lists the specific system being installed (brand and model number) and the estimated labor hours.

Ask whether the quote includes warranty coverage and for how long. Ask whether the shop handles your vehicle's specific security system or if there are compatibility concerns. Ask whether the price includes removal and reinstallation of interior panels if needed.

Prices vary significantly by region. A remote start installation in a rural area might cost $400 to $600; the same job in a major city might cost $800 to $1,200. Getting local quotes is the only way to know what you will actually pay.

Frequently Asked Questions

Can I install remote start myself to save money?

If you have automotive electrical experience, some aftermarket systems are designed for DIY installation and cost only the hardware ($200 to $600). However, improper installation can damage your vehicle's electrical system, void your warranty, or create safety issues. Most people should hire a professional. The labor cost is worth the may provide that the system works correctly.

Will remote start void my vehicle's warranty?

Factory remote start will not void your warranty. Aftermarket systems may, depending on your manufacturer and what goes wrong. If the remote start system causes electrical damage, the manufacturer might deny a warranty claim. Ask the installer whether they carry liability insurance and whether they warrant their work against damage to your vehicle.

Does remote start use extra fuel or battery power?

Remote start does use fuel and battery power when the engine runs unattended. Most systems let you set a timer so the engine shuts off after 10 to 15 minutes. Battery drain from the remote module itself is minimal when the car is off. The real cost is the fuel burned during those idle minutes.

Can I add remote start to a vehicle with a manual transmission?

Yes, but it costs more and some shops decline the job. A manual transmission requires a safety module that prevents the engine from starting unless the clutch is fully engaged. This adds $100 to $300 to the installation cost and requires more complex wiring. Ask shops in your area whether they install on manual transmissions before shopping for quotes.

What is the difference between a one-way and two-way remote start system?

A one-way system sends a signal to start your car but does not send confirmation back to your key fob. A two-way system confirms the engine started by flashing lights or beeping. Two-way systems cost $100 to $200 more for hardware and may require additional labor. The choice depends on whether you want confirmation your car actually started.