You can replace a Subaru key fob battery yourself in about five minutes with no tools
Most Subaru key fobs use a coin-cell battery—usually CR2032 or CR2025—that you can buy at any pharmacy, supermarket, or hardware store for two to five dollars. The fob itself is designed to open without tools: you slide a coin into the seam on the edge, twist gently, and the two halves separate. Once you swap the old battery for a new one, the fob works when ready. You do not need a dealer visit, a technician, or any special equipment.
The only real decision is whether your fob uses a CR2032 (the more common size) or a CR2025 (slightly thinner). If you are not sure, open the fob first and look at the battery itself—the size is printed on it. You can also call your Subaru dealer with your vehicle year and model, and they will tell you which one you need.
Key Takeaways
- Subaru key fobs open by sliding a coin into the seam on the edge and twisting—no screwdriver required.
- The battery type (usually CR2032 or CR2025) is printed on the old battery itself, so check before you buy a replacement.
- A new coin-cell battery costs two to five dollars and is sold at pharmacies, supermarkets, and hardware stores.
- After you install the new battery and close the fob, test the lock and unlock buttons to confirm it works before you rely on it.
How to open your Subaru key fob
Look at the edge of your fob for a thin seam running around the perimeter. This is where the two plastic halves meet. Slide a coin—a dime, penny, or quarter works—into that seam on the side opposite the key ring attachment. You are aiming for the slot, not forcing the coin in; it should slide in with light pressure.
Once the coin is seated in the seam, twist it gently as if you are opening a jar. You will feel the two halves start to separate. Do not force it; if it is stuck, try a different spot along the seam or make sure the coin is fully seated. After a quarter-turn or so, the fob will pop open. Set the two halves aside on a clean surface so you do not lose the small spring or contact points inside.
Identifying and removing the old battery
Inside the fob, you will see a flat, round battery sitting in a small metal holder or clip. This is the coin-cell battery. Look at the top surface of the battery—the size and type are printed there (CR2032, CR2025, or another designation). Write this down or take a photo with your phone so you know exactly what to buy.
To remove the battery, gently pry it out of the holder using your fingernail or the edge of a coin. It should come free with light pressure. Do not use a screwdriver or anything sharp, because you can damage the plastic holder or the circuit board underneath. Once the old battery is out, set it aside. If the fob has been sitting unused for months or years, the old battery may be dead or corroded; that is normal and expected.
Installing the new battery
Before you install the new battery, check that the positive side (marked with a + symbol) is facing up toward you. This matters: if you install it upside down, the fob will not work, and you will have to open it again and flip it over.
Slide the new battery into the metal holder, positive side up, until it sits flat and level. It should fit snugly without forcing. If the holder has a small clip or tab, make sure the battery is seated under it so it does not rattle loose. Close the fob by pressing the two halves together until you hear or feel a click. The seam should be flush all the way around; if there is a gap, open it again and check that the battery is seated properly and nothing is blocking the edges.
Testing your key fob after replacement
Before you put the fob in your pocket or bag, test both the lock and unlock buttons while standing near your Subaru. Press the lock button and listen for the doors to lock and the lights to flash. Press the unlock button and confirm the doors unlock. If both buttons work, the battery is installed correctly and the fob is ready to use.
If the fob does not respond, open it again and check that the battery is seated correctly with the positive side facing up. If it still does not work after you reseat the battery, the battery itself may be defective (rare but possible), or the fob may have an internal problem unrelated to the battery. In that case, a Subaru dealer can test the fob and replace it if necessary.
Where to buy a replacement battery
Coin-cell batteries are sold almost everywhere: pharmacies like CVS and Walgreens, supermarkets, hardware stores like Home Depot and Lowe's, and online retailers. You can also buy them at Subaru dealerships, though the price is usually higher (five to ten dollars versus two to five dollars elsewhere). Many retailers sell multi-packs of the same battery type, which is useful if you have multiple fobs or want a spare on hand.
If you are not sure which size you need before you leave home, call your Subaru dealer with your vehicle year and model number. They can tell you the correct battery type in one phone call. Alternatively, open your fob first, look at the old battery, and buy the exact same type.
What to do if your fob still does not work after battery replacement
If you installed a new battery, tested both buttons, and the fob still does not respond, the problem is usually not the battery. The most common causes are a loose or corroded contact point inside the fob, water damage, or a failed circuit board. These are not things you can fix at home.
Contact your Subaru dealer with your vehicle year and model. They can test the fob, replace it if it is defective, and program a new one to your vehicle if needed. The cost of a replacement fob varies by model year and whether it has remote start or other features, but a dealer can give you a quote over the phone. In the meantime, you can still unlock and start your vehicle using the physical key blade that is usually hidden inside the fob.
Frequently Asked Questions
Can I use a different battery size if I cannot find the exact one?
No. CR2032 and CR2025 are different thicknesses, and using the wrong size can prevent the fob from closing properly or cause the battery to rattle loose. Always use the exact size printed on your old battery. If your local store does not have it in stock, order it online or try a different retailer.
How often do I need to replace the battery?
Most Subaru key fob batteries last three to four years with normal use. If you use the fob frequently or live in a humid climate, the battery may wear out sooner. You will notice the range decreasing (you have to stand closer to the car) before the fob stops working entirely.
What if I drop the fob in water?
If your fob gets wet, remove the battery when ready and let both the fob and battery dry completely for at least 24 hours in a warm, dry place. Then install a fresh battery and test it. If water got inside the circuit board, the fob may not work even with a new battery, and you will need a replacement from your dealer.
Do I need to reprogram the fob after changing the battery?
No. Changing the battery does not erase the fob's programming. Once you install the new battery and close the fob, it will work when ready without any reprogramming steps.
Is it safe to handle the battery with my bare hands?
Yes. Coin-cell batteries are safe to touch with bare hands. Wash your hands afterward if you prefer, but there is no risk from handling the battery itself. Avoid touching the positive and negative terminals with wet fingers, as moisture can corrode the contacts.