What a Glock extension magazine does
A Glock extension magazine is a baseplate and follower assembly that attaches to the bottom of a standard Glock magazine to increase its round capacity. Instead of carrying 15 rounds in a standard Glock 17 magazine, an extension might hold 17, 19, or more rounds in the same magazine body. The extension sits flush or slightly proud of the magazine, depending on the design, and the magazine still fits in your Glock's magwell without modification.
Extensions work by adding height to the magazine's base, which pushes the spring and follower down slightly and allows more rounds to stack inside. The spring tension remains the same, so feeding reliability depends entirely on the quality of the extension and how well it's manufactured. A poorly made extension can cause double-feeds, failure to feed, or rounds that sit too high and jam against the slide.
Glock extensions are legal to own and use in most states for civilian carry and sport shooting, but some states and localities restrict magazine capacity. Before purchasing or carrying an extended magazine, check your local and state laws—capacity limits vary widely and change frequently.
Key Takeaways
- Extension magazines add 2 to 5 rounds to a standard Glock magazine by replacing the baseplate and follower with a taller assembly.
- The magazine body itself does not change, so extended magazines still fit your Glock's magwell and holster without modification.
- Reliability depends on manufacturing quality; cheap extensions can cause feeding failures that a quality extension will not.
- Magazine capacity is restricted by law in some states and cities, so you must verify local law before carrying an extended magazine.
- Extended magazines are heavier and sit lower in a holster, which affects draw speed and concealment compared to standard magazines.
How extension baseplates and followers fit together
A Glock extension consists of two main parts: a baseplate (the bottom piece you see) and a follower (the plastic piece that sits on top of the spring inside the magazine). When you remove the standard baseplate by pushing it forward and down, you slide out the spring and follower. The extension baseplate and follower then slide back in, and the new baseplate locks into place the same way the original did.
The follower is slightly taller or shaped differently than the standard follower, which allows the spring to compress less and fit more rounds. Some extensions use a standard-height follower but a much taller baseplate; others use a taller follower with a standard baseplate. The best extensions use both—a taller follower and a baseplate that's engineered to work together and maintain proper spring tension.
Installation takes less than a minute and requires no tools. You can swap extensions between magazines of the same model, and you can keep your original baseplates and followers if you want to revert to standard capacity. Many shooters carry one extended magazine as a backup and keep standard magazines for everyday carry or concealed carry where the extra height matters.
Why extension quality affects reliability
A quality extension from a manufacturer like Taran Tactical, Magpul, or ETS maintains the same spring curve and follower geometry as the original magazine. This means rounds feed smoothly and the magazine functions exactly as Glock designed it, just with more capacity. The baseplate locks securely, the follower doesn't tilt, and the spring doesn't bind.
A cheap extension often uses a follower that's too tall or a spring that's compressed too much, which causes rounds to sit at an angle inside the magazine. When you chamber a round, the next round in line may not align with the feed lips, causing a double-feed or failure to feed. Some cheap extensions also have baseplates that don't lock tightly, allowing the magazine to rattle or come apart during use.
If you're going to run an extended magazine for self-defense or duty use, test it thoroughly before you carry it. Load it to full capacity, chamber rounds, and fire at least 50 rounds through it to confirm it feeds reliably. If you see any failures to feed or double-feeds, the extension is not reliable enough for carry—go back to a standard magazine or try a different extension brand.
How extension magazines affect concealment and draw speed
An extended magazine sits lower in your holster than a standard magazine, which changes how your gun sits on your body. If you carry inside the waistband (IWB), the extra height may print more visibly through your shirt, especially if you're carrying a compact Glock like a G19. The magazine itself becomes heavier when fully loaded, which can shift your gun's balance and make it sit differently in the holster.
Draw speed is affected because your hand has to travel slightly farther to clear the magazine from the holster. For most shooters this difference is negligible—a few milliseconds—but for competition or duty use where speed matters, every fraction of a second counts. Some shooters prefer to carry a standard magazine for everyday carry and keep an extended magazine as a backup in a pocket or bag.
Holster fit also changes. A holster designed for a standard Glock 17 magazine may be too loose around an extended magazine, or the extended magazine may not fit at all depending on how the holster is cut. If you switch to extended magazines, you may need a holster designed to accommodate them, or you may need to use a magazine carrier instead of carrying the gun with the extended magazine in the same holster.
Magazine capacity laws by state and locality
Several states ban magazines that hold more than a certain number of rounds. California, Colorado, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, and Vermont all have state-level capacity restrictions that range from 10 to 15 rounds. Some of these states allow you to own extended magazines but prohibit carrying them loaded, or they allow them only for sport shooting at a range.
Even within states that don't have statewide restrictions, individual cities and counties may ban high-capacity magazines. New York City, for example, restricts magazines to 10 rounds even though New York State allows 10-round magazines. You must check both your state law and your local city or county ordinances before purchasing or carrying an extended magazine.
Laws change frequently, and some restrictions have been challenged in court. Before you buy, search "[your state] magazine capacity law" or contact your local police department's non-emergency line to confirm what's legal in your area. Carrying a magazine that violates local law can result in criminal charges, even if you never fire the gun.
Choosing between standard and extended magazines
For concealed carry, a standard magazine usually makes more sense. It prints less, fits more holsters, and doesn't add weight or change your gun's balance. If you carry a compact Glock like a G19 or G26, the difference between standard and extended capacity is often only 2 to 3 rounds, which may not justify the concealment trade-off.
For home defense, sport shooting, or duty carry where concealment isn't a priority, an extended magazine gives you more rounds without changing your gun. A G17 with an extended magazine can hold 17 to 19 rounds instead of 15, which is a meaningful increase if you're in a situation where you need to fire many rounds. Many competition shooters use extended magazines because they reduce the number of reloads needed during a stage.
If you do carry an extended magazine, carry at least one standard magazine as a backup. Standard magazines are more likely to fit in borrowed holsters, and they're more universally compatible with other shooters' guns if you ever need to hand off a magazine. Keep your original baseplates and followers so you can revert to standard capacity if you move to a state with capacity restrictions.
Frequently Asked Questions
Will an extension magazine fit in my Glock's magwell without modification?
Yes. The magazine body doesn't change, only the baseplate and follower. An extended magazine fits the magwell exactly the way a standard magazine does. Some extensions sit slightly proud of the magwell, but this is normal and doesn't affect function or fit.
Can I use an extension magazine in a Glock that's not a G17?
Extensions are made for specific Glock models. A G19 extension won't fit a G17 magazine, and a G26 extension won't fit a G19 magazine. When you buy an extension, confirm it's designed for your exact Glock model. Mixing extensions and magazines can cause feeding failures.
Do extension magazines affect my gun's warranty?
Glock's warranty covers the gun frame and slide, not magazines. Using an extension magazine won't void your gun's warranty. However, if a feeding failure is caused by the extension, Glock won't cover it—that's a magazine issue, not a gun issue.
What's the difference between an extension and a +2 or +5 baseplate?
The terms are used interchangeably. A "+2" extension adds 2 rounds, a "+5" adds 5 rounds. The number refers to how many extra rounds the extension allows compared to the standard magazine for that gun. A G17 standard magazine holds 15 rounds, so a "+2" extension holds 17.
Can I carry an extended magazine in a standard Glock holster?
It depends on the holster. Some holsters are cut generously and will accommodate an extended magazine. Others are cut tight to the standard magazine and won't fit an extension. If you switch to extended magazines, test the fit before you carry, or buy a holster designed for extended magazines.