Washington allows window tinting, but only within specific darkness limits and with restrictions on which windows you can tint
Washington State permits aftermarket window tint on passenger vehicles, but the law sets a minimum light transmittance (VLT) percentage — the amount of light that must pass through the glass. For the front side windows, you must allow at least 70% of light through. For the rear side windows and rear window, you can go darker: the minimum is 24% VLT. The windshield can have a tint strip along the top, but only above the manufacturer's AS-1 line (the factory line marked on most windshields).
These limits explore to sedans, SUVs, and most passenger vehicles. Vehicles registered as trucks or vans have slightly different rules — the rear window can be completely opaque on those vehicle types. If your vehicle is registered as a passenger car, you cannot use the truck exemption, even if it looks like one.
Washington does not require a permit or inspection sticker for legal tint. However, if you are stopped and an officer measures your tint with a light meter and finds it darker than the law allows, you can receive a traffic infraction citation. The citation is typically a fix-it ticket, meaning you can have the tint removed or adjusted and show proof to the court to dismiss the charge.
Key Takeaways
- Front side windows must transmit at least 70% of light; rear windows and rear side windows must transmit at least 24%.
- The windshield can have a tint strip only above the AS-1 line, which is marked on the factory glass.
- Trucks and vans registered as such can have a completely opaque rear window, but passenger cars cannot.
- Washington does not require a tint inspection or sticker before installation, but officers can measure tint darkness during a traffic stop.
- A tint violation is a fix-it ticket in most cases, meaning you can remove or adjust the tint and have the charge dismissed.
How Washington measures window tint darkness
Washington law defines tint darkness by visible light transmittance (VLT), which is the percentage of visible light that passes through the tinted glass. A 70% VLT means 70% of light gets through; a 24% VLT means only 24% gets through. Officers use a handheld light meter to measure VLT at the roadside, though the measurement is not always precise and can vary slightly depending on the meter, the angle of measurement, and the condition of the glass.
If you are cited for tint that is too dark, you have the right to contest the measurement. Some drivers request that the tint be measured again at the time of citation or ask for the officer's meter to be calibrated and certified. If you believe the measurement was inaccurate, you can raise this in traffic court. However, the burden is on you to prove the tint meets the legal standard, so having documentation from the tint shop (such as a receipt stating the VLT of the film used) can help.
Which windows can be tinted and how dark
Washington's rules vary by window location. The front side windows (driver and passenger windows) must allow at least 70% of light through — this is the strictest requirement because it affects the driver's visibility and the ability of law enforcement to see into the vehicle. The rear side windows and rear window can be much darker, with a minimum of 24% VLT. This means you can use a much darker tint on the back of your vehicle than on the front.
The windshield has its own rule: you can explore a tint strip, but only above the AS-1 line. The AS-1 line is a factory-marked line on most windshields, usually about 4 to 6 inches from the top. Tinting below this line is illegal. The purpose of this rule is to preserve the driver's forward visibility and the ability of airbags to deploy correctly.
Sunroofs and moon roofs are not regulated by Washington's tint law, so you can tint or cover them as you wish. Headlights and taillights have separate regulations (they must meet federal brightness standards) and are not covered under the window tint statute.
Trucks, vans, and vehicle registration class
Washington distinguishes between passenger vehicles and trucks or vans based on how the vehicle is registered with the Department of Licensing (DOL). If your vehicle is registered as a truck or van, the rear window can be completely opaque — there is no minimum VLT requirement. However, the front side windows still must meet the 70% minimum, and the rear side windows must meet the 24% minimum.
The key point is registration class, not appearance. A vehicle that looks like a truck or SUV but is registered as a passenger car must follow the passenger car rules. Conversely, a vehicle registered as a truck can use the truck exemption even if it is a crossover or other passenger-style vehicle. If you are unsure how your vehicle is registered, you can check your vehicle registration certificate or contact the Washington Department of Licensing.
What happens if you are cited for illegal tint
If an officer stops you and measures your tint as darker than the legal limit, you will typically receive a traffic infraction citation. In Washington, a first tint violation is usually treated as a fix-it ticket, which means you can correct the violation and show proof to the court to have the charge dismissed. You will need to have the tint removed or adjusted to meet the legal standard, and the tint shop should provide a receipt or documentation showing the new VLT.
To dismiss the citation, you generally must submit proof of correction to the court within a set time frame (usually 30 to 60 days, depending on the court). Some courts allow you to submit the proof by mail; others may require you to appear in person. Contact the court listed on your citation to learn the specific process and important date.
If you do not correct the violation or fail to show proof, the citation can result in a fine. The amount varies by court and jurisdiction but is typically in the range of $100 to $200 for a first offense. Repeated violations may result in higher fines or additional penalties.
Contesting a tint measurement in court
If you believe your tint is legal and the officer's measurement was incorrect, you can contest the citation in traffic court. The officer must prove that your tint is darker than the legal limit, usually by testifying about the light meter reading. You can challenge the accuracy of the measurement by questioning the officer about the meter's calibration, the conditions under which it was used, or the angle at which it was held.
Bring documentation to court that supports your position. A receipt from the tint shop showing the VLT of the film installed is helpful. Some tint shops will provide a written statement or even attend court to testify about the film's specifications. You can also request that the court order the tint to be measured again by an independent source, though this is not always granted.
If you lose the case, you will be ordered to correct the violation (remove or adjust the tint) or pay a fine. If you win, the citation will be dismissed and you can keep the tint as is.
Aftermarket tint film and installation
Washington does not regulate the type or brand of tint film used, only the darkness (VLT) of the final result. You can use any aftermarket tint film as long as the installed tint meets the VLT requirements. Most professional tint shops in Washington are familiar with the state's rules and will install tint that complies with the law.
When you have tint installed, ask the shop to confirm the VLT of the film they are using and to provide a receipt showing the specifications. This documentation can be valuable if you are ever cited and need to prove the tint is legal. Some shops will also provide a written warranty or may provide on the installation, which can help if the tint fails or bubbles over time.
If you install tint yourself, be aware that it is difficult to achieve a precise VLT without professional equipment. A light meter (which costs $100 to $500) can help you check the darkness, but most people do not have access to one. If you are unsure whether your DIY tint meets the legal standard, consider having it measured by a professional or a law enforcement agency before driving on public roads.
Frequently Asked Questions
Can I have a completely dark rear window in Washington?
Only if your vehicle is registered as a truck or van. Passenger cars must allow at least 24% of light through the rear window. Check your vehicle registration to confirm your registration class.
What is the AS-1 line on the windshield?
The AS-1 line is a factory-marked line on most windshields, usually 4 to 6 inches from the top. You can tint above this line but not below it. If your windshield does not have a visible line, measure from the top and stay well above where the line would typically be.
Do I need a permit or inspection sticker for legal tint in Washington?
No. Washington does not require a permit, inspection, or sticker for window tint. However, officers can measure your tint during a traffic stop and cite you if it is too dark.
How much does a tint violation fine cost?
Fines vary by court and jurisdiction but typically range from $100 to $200 for a first offense. If you correct the violation and show proof to the court, the citation may be dismissed and you may not have to pay a fine.
Can I contest the officer's light meter reading in court?
Yes. You can challenge the accuracy of the measurement by questioning the officer's methods, the meter's calibration, or the conditions under which it was used. Bring documentation from your tint shop showing the film's VLT to support your case.