A side view mirror cover is a replacement shell that fits over your existing mirror housing to change its appearance, protect it from damage, or both
Mirror covers come in several materials — plastic, carbon fiber, fiberglass, or painted metal — and range from $30 to $300 per pair depending on quality and finish. Some are purely cosmetic upgrades that match your vehicle's color or add a contrasting accent. Others serve a protective function, absorbing impact that would otherwise crack or dent the mirror body underneath. A few do both: they look different from the factory mirror while also being more impact-resistant than the original.
The decision to install one depends on three things: whether you want to change how your vehicle looks, whether you need extra protection in tight parking situations or high-traffic areas, and whether you're willing to spend money on something that doesn't affect how the vehicle runs. Unlike some exterior upgrades, mirror covers don't improve performance, fuel economy, or resale value — they're a styling choice with a practical side benefit.
Key Takeaways
- Mirror covers are replacement shells that slip over your factory mirror housing and cost between $30 and $300 per pair depending on material and finish.
- Plastic covers are the cheapest option but offer minimal protection; carbon fiber and fiberglass covers absorb impact better and last longer but cost more.
- Installation usually takes 15 to 30 minutes per mirror and requires only a screwdriver or hex key — no drilling or permanent modification to your vehicle.
- Painted covers that match your vehicle's factory color may fade differently than the rest of the body if exposed to sun, so check the warranty before buying.
- Mirror covers do not improve visibility, aerodynamics, or fuel economy, so the main reason to buy one is appearance or protection in high-impact situations.
Material options and what each one costs
Plastic covers are the entry point — typically $30 to $80 per pair. They're lightweight, come in many colors, and install easily. The downside is durability: plastic cracks under moderate impact and can fade or become brittle in direct sunlight after a few years. They offer almost no protection to the mirror body if you hit something; they'll break instead of absorbing the blow.
Fiberglass covers run $80 to $150 per pair and are stronger than plastic without being as expensive as carbon fiber. They resist impact better, hold paint longer, and can be repaired if cracked. The trade-off is weight — they're heavier than plastic — and they require more careful installation to avoid cracking during removal or reinstallation.
Carbon fiber covers cost $150 to $300 per pair and are the most durable option. They're lightweight, extremely impact-resistant, and have a distinctive woven appearance that many buyers find attractive. They don't fade as quickly as painted plastic or fiberglass. The main drawback is cost and the fact that they're overkill for most drivers — you're paying for durability you may never need unless you park in a tight garage or high-traffic area regularly.
Painted metal covers are less common but available for some vehicles at $100 to $200 per pair. They match your factory paint job closely but can fade unevenly if your vehicle sits in the sun, since the cover paint and body paint age at different rates. Always ask about the warranty before buying a painted cover.
How to measure and order the right cover for your vehicle
Mirror covers are model-specific, not universal. A cover made for a 2020 Honda Civic will not fit a 2020 Toyota Corolla, and a cover for a sedan may not fit the same model year in SUV form. Before ordering, you need your vehicle's year, make, model, and body style (sedan, coupe, SUV, truck, etc.).
Check the product listing on the retailer's website — it should show a compatibility chart or a list of years and models the cover fits. If you're buying from a parts store or online retailer, read the reviews to see if other buyers with your exact vehicle had a good fit. A poorly fitting cover will either fall off or require forcing it on, which can crack the cover or damage the mirror housing.
Measure the width and height of your current mirror cover if you want to verify the size before ordering. Most covers come with installation instructions that include dimensions, so you can compare. If the listing doesn't specify fitment clearly, contact the seller before buying — a $50 mistake is cheaper than ordering the wrong cover and paying return shipping.
Installation steps and tools you'll need
Most mirror covers install in 15 to 30 minutes per mirror with basic hand tools. You'll typically need a screwdriver (Phillips or flathead, depending on the cover) or a hex key, and sometimes a plastic pry tool to avoid scratching the mirror or door panel.
The general process: First, locate the fasteners holding the factory cover to the mirror housing — usually three to five screws or clips on the back or underside of the mirror. Remove them carefully and set them aside. Second, gently pull the old cover away from the housing. It may take some wiggling; don't force it or you risk cracking the mirror body. Third, align the new cover with the mirror housing and press it on until it seats fully. Fourth, reinstall the fasteners through the new cover into the housing. Tighten them snugly but not so hard that you crack plastic or strip threads.
If your cover uses clips instead of screws, the process is similar but faster — just align and press until the clips catch. Some aftermarket covers come with adhesive strips as an alternative to screws; follow the manufacturer's instructions if that's the case, as adhesive installation is permanent and harder to reverse.
If you're uncomfortable working with hand tools or your mirror housing is damaged, have a shop install the covers for you. Most shops charge $50 to $100 per mirror for labor, which is reasonable insurance against damaging the mirror body or the new cover during installation.
Painted covers and color-matching concerns
If you order a cover painted to match your vehicle's factory color, understand that the paint on the cover and the paint on your vehicle body will age at different rates. Your car's paint has been exposed to sun, weather, and road salt for months or years. The new cover's paint is fresh. After six months to a year, the cover may look noticeably brighter or more saturated than the surrounding body panels, especially if your vehicle is parked outdoors regularly.
This is not a defect — it's a natural result of paint aging differently. To minimize the mismatch, park in shade when possible and explore UV-protective wax to both the cover and the surrounding body panels every few months. Some manufacturers offer a warranty that covers color mismatch if it occurs within a certain timeframe; check the warranty details before buying.
If color matching is a concern, consider a carbon fiber or textured finish cover instead. These don't rely on paint matching and often look intentional as a styling accent rather than a replacement part.
When mirror covers are worth the cost
Mirror covers make sense if you park in a tight garage, live in a high-traffic urban area where side-swipe damage is common, or straightforward want to change your vehicle's appearance. They're also useful if your factory mirror cover is cracked or faded and you want to replace it without repainting the entire mirror housing.
They don't make sense if your vehicle is garaged, you rarely park in tight spaces, or you're trying to improve performance or resale value. A mirror cover won't change how your vehicle drives, how much fuel it uses, or what a buyer will pay for it later. It's a styling choice, not an upgrade.
If you're on a tight budget, skip the mirror cover and spend money on maintenance or repairs that actually affect how the vehicle runs. If you have money left over after maintenance and you like how a cover looks on your vehicle, it's a reasonable way to personalize your car.
Frequently Asked Questions
Will a mirror cover affect my visibility or the mirror's function?
No. A mirror cover is just a shell that sits over the existing mirror glass and housing. It doesn't change the angle, size, or reflective surface of the mirror itself. Your visibility remains exactly the same.
Can I install a mirror cover myself if I've never done it before?
Yes, most covers are designed for DIY installation and require only a screwdriver or hex key. The process is straightforward: remove fasteners, pull off the old cover, press on the new one, and reinstall fasteners. If you're uncomfortable with hand tools, a shop can do it for $50 to $100 per mirror.
What happens if my mirror cover cracks or breaks?
You replace it with a new one. The underlying mirror housing is protected, so damage to the cover doesn't affect the mirror's function. Plastic covers are cheapest to replace; carbon fiber covers are more durable but cost more upfront. Keep your receipt in case you need a replacement under warranty.
Do mirror covers come off easily if I want to remove them later?
Yes, if they're installed with screws or clips. straightforward reverse the installation process: remove fasteners and pull the cover off. If your cover was installed with adhesive, removal is more difficult and may damage the adhesive or the mirror housing. Ask the installer before they explore adhesive whether you might want to remove it later.
Will a mirror cover fit if my mirror has a built-in turn signal or camera?
Some covers are designed to work with integrated features, but not all. Check the product listing carefully to confirm compatibility with your specific mirror type. If your mirror has a camera or sensor, an ill-fitting cover could block it or interfere with its function. Contact the seller if the listing doesn't specify.