The second-generation Charger is a mid-size muscle car that Dodge built from 1968 to 1970, and it's the model most people picture when they think of a classic Charger

The 1968 redesign gave the Charger a longer hood, a fastback roofline, and a hidden headlight setup that became its signature look. Unlike the first generation (1966–1967), which was based on the Coronet platform, the second generation sat on the same frame but received a completely different body. The car came with a range of engine options from a 225-cubic-inch slant-six up to the legendary 426 Hemi V8, and it was available as a two-door hardtop only—no convertible or four-door versions.

This generation is important to understand because it's the one that defined the Charger's reputation as a performance car and made it a cultural icon. If you're looking at buying one, working on one, or just want to know what makes it different from other Dodge muscle cars of that era, the mechanical and design details matter to how the car behaves and what it will cost to maintain.

Key Takeaways

  • The 1968–1970 Charger used a unibody frame shared with the Coronet but had a completely new body with a distinctive fastback roof and hidden headlights.
  • Engine options ranged from a 225-cubic-inch slant-six to the 426 Hemi V8, and the engine you have determines fuel consumption, cooling demands, and parts availability.
  • The Charger's hidden headlight system uses a mechanical motor that can fail, and replacement parts are expensive because they are reproduction-only items now.
  • Rust is the biggest threat to these cars because the unibody design means corrosion weakens the structural frame, not just the appearance.
  • Finding original parts is difficult; most restoration work relies on reproduction suppliers, and fitment can vary between model years.

Engine options and what they mean for ownership

The second-generation Charger came with five main engine choices, and which one your car has affects everything from fuel economy to how hard the cooling system has to work. The base engine was the 225-cubic-inch slant-six, which produced 145 horsepower and was designed for economy rather than performance. The 318-cubic-inch V8 (230 hp) and 383-cubic-inch V8 (290–330 hp depending on year) were the middle options. The 440-cubic-inch V8 (375 hp) and the legendary 426 Hemi V8 (425 hp) were the high-performance choices.

If you own or are considering a Charger with a Hemi engine, understand that this engine runs hotter than the others and demands a properly functioning cooling system. The Hemi has a different block design, different head configuration, and different intake manifold than the other big blocks, which means parts are not interchangeable. Reproduction Hemi parts exist, but they are more expensive and sourcing them takes longer. The slant-six is the easiest to maintain because parts are common and the engine is straightforward, but it's also the slowest and least valuable in the collector market.

The hidden headlight system and why it fails

The second-generation Charger's most distinctive feature is the hidden headlight setup, where the headlights sit behind a motorized panel that opens and closes. This was a styling choice that made the front end look cleaner, but it introduced a mechanical component that wears out. The motor that operates the panel is a small electric unit that can fail from age, corrosion, or straightforward being stuck in one position for too long.

When the motor fails, you have three options: repair the original motor (difficult and rarely successful), replace it with a reproduction motor (expensive, $300–$500 per side), or convert to fixed open headlights (permanent change that affects the car's appearance). The panel itself can also warp or crack, and replacement panels are reproduction-only. If you're buying a second-generation Charger, test the headlight doors before you commit—a stuck or non-functioning system is a red flag that suggests the car has been sitting or neglected.

Rust and structural integrity in unibody construction

The second-generation Charger uses unibody construction, which means the frame and body are welded together as one unit rather than bolted together. This design is lighter and more rigid than a separate frame, but it has a critical weakness: rust eats through the structural integrity of the car, not just the cosmetics. Common rust spots on these cars include the floor pans, the rear quarter panels, the trunk floor, and the areas around the rear window.

If rust has penetrated the floor pans or quarter panels, the car is structurally compromised. A patch panel welded over surface rust is a temporary fix; the rust underneath continues to spread. Professional restoration of rusted unibody sections requires cutting out the corroded metal and welding in new pieces, which is expensive and time-consuming. Before buying a second-generation Charger, get underneath and look for soft spots, bubbling paint, or holes. Tap the metal with a small hammer—if it sounds hollow or the hammer goes through, the rust is deep.

Interior design and common wear points

The second-generation Charger's interior was modern for 1968 but used materials that age poorly. The dashboard is a hard plastic that cracks and fades in sunlight, and the seats used vinyl or cloth that tears easily. The steering column is a straightforward design without the safety features of modern cars—there's no collapsible column or airbag, which is something to understand if you plan to drive the car regularly.

The door panels, headliner, and carpet are all reproduction items now, and quality varies widely depending on the supplier. Original seat covers are nearly impossible to find; most restorations use reproduction covers that approximate the original pattern. The instrument cluster is mechanical (not electronic), which means the speedometer and gauges can fail if the cable breaks or the stepper motors wear out. Reproduction clusters exist but are expensive. Climate control is basic—most second-generation Chargers have a straightforward heater and no air conditioning, or an aftermarket A/C unit if one was added later.

Transmission and drivetrain considerations

The second-generation Charger came with either a three-speed automatic (TorqueFlite), a four-speed manual, or a three-speed manual, depending on the engine and model year. The TorqueFlite automatic is reliable and still serviceable, but transmission fluid and filter changes are important because the transmission runs hot in a heavy muscle car. The four-speed manual is a Chrysler A833, which is strong but can develop grinding in third gear if the synchronizers wear.

The rear axle is a 8.75-inch or 9.75-inch Dana axle depending on the engine—the Hemi cars came with the stronger 9.75-inch. These axles are durable but the bearings and seals wear over time, and a leaking rear axle seal will contaminate the brake drums. If you're buying a Charger, check the rear axle for leaks and listen for a clunking sound when shifting between drive and reverse, which indicates worn U-joints or excessive play in the axle shaft.

Cooling system demands and overheating risk

The second-generation Charger, especially with a big-block engine, generates significant heat, and the cooling system has to work hard to manage it. The radiator is a two-core or three-core design depending on the engine, and the water pump is belt-driven. Over time, the radiator clogs with sediment, the water pump impeller corrodes, and the hoses crack. A failing cooling system will cause the engine to overheat, which can warp the cylinder head and crack the block—catastrophic damage that makes the engine unusable.

If you own a second-generation Charger, flush the cooling system every two years and inspect the hoses for cracks or soft spots. The radiator should be professionally cleaned or replaced if the car has been sitting for years. A mechanical fan clutch (which engages when the engine is hot) is standard on these cars, and it can fail silently—the fan will spin freely even when the engine is hot, which means no cooling. If the engine runs hot at idle but cools down at highway speeds, the fan clutch is likely failing.

Finding parts and restoration challenges

Original parts for the second-generation Charger are scarce because the car is now 50+ years old and most original inventory was scrapped or used up in repairs. Reproduction suppliers make panels, trim, interior pieces, and some mechanical parts, but quality and fitment vary. A reproduction floor pan may not align perfectly with the original spot welds, and a reproduction door panel may be slightly different in color or texture from the original.

The best source for hard-to-find parts is a Charger-specific supplier or a Mopar (Chrysler/Dodge) specialist, but these suppliers are not everywhere and shipping can be expensive. Online forums and clubs dedicated to second-generation Chargers are valuable resources for finding out which reproduction suppliers are reliable and which ones have fitment issues. If you're planning a restoration, budget extra time and money for parts sourcing—what should take two weeks can take two months if a part is backordered or doesn't fit correctly on arrival.

Frequently Asked Questions

What's the difference between a 1968, 1969, and 1970 Charger?

The 1968 is the first redesign with hidden headlights and the fastback roof. The 1969 added a more aggressive front grille and revised hood. The 1970 received a new front end with a split bumper and a revised interior. Engine options and horsepower ratings changed year to year, so the year matters for performance specs and parts compatibility.

How much does it cost to restore a second-generation Charger?

A basic restoration (paint, interior, mechanical work) can range from $15,000 to $40,000 depending on the starting condition and how much rust repair is needed. A full frame-off restoration with all original parts can exceed $60,000. The cost depends heavily on whether you do the work yourself, whether the unibody has rust damage, and how many reproduction parts you need.

Are second-generation Chargers reliable for regular driving?

These cars are reliable if they are maintained, but they lack modern safety features and comfort. The cooling system, brakes, and suspension need regular attention. Fuel consumption is poor (10–14 mpg depending on engine), and there's no power steering on some models. They are best suited for weekend driving or short trips, not daily commuting.

Can I swap a modern engine into a second-generation Charger?

Yes, engine swaps are common in the Charger community, but they require custom engine mounts, fuel system modifications, and electrical work. A modern engine will run cooler and more reliably, but it changes the car's character and can affect its value as a collector car. Swaps are expensive and time-consuming, so understand the full scope before starting.

What should I look for when buying a used second-generation Charger?

Check for rust in the floor pans, quarter panels, and trunk. Test the hidden headlight doors. Look at the engine bay for oil leaks and corrosion. Listen for grinding in the transmission and clunking in the rear axle. Ask for service records and find out how long the car has been sitting. A car that has been garaged and maintained is worth more than a barn find, even if the barn find looks better cosmetically.