The Charger Hellcat hood is a functional air-intake design, not a cosmetic upgrade
The hood on a Dodge Charger Hellcat is engineered to feed cold air directly to the supercharger. Unlike a traditional hood, it has two large functional scoops that draw air from outside the engine bay and channel it through the supercharger intake. This is not a styling choice — it is a requirement for the engine to breathe properly at full power.
The hood itself is made from aluminum on most model years, which reduces weight compared to steel. The scoops are integrated into the hood's structure, so you cannot remove them or replace the hood with a standard Charger hood without affecting engine performance and airflow.
If your Hellcat hood is damaged, you will need a replacement hood designed specifically for the Hellcat model year, not a hood from a standard Charger or a different generation Hellcat.
Key Takeaways
- The Hellcat hood has functional air scoops that feed the supercharger, so it is not interchangeable with standard Charger hoods.
- The hood is aluminum on most years, making it lighter than a steel hood but more expensive to replace if damaged.
- Replacement hoods must match your specific model year because scoop design and mounting points vary between generations.
- Aftermarket hood options exist but are limited, and any non-OEM hood should be tested for proper airflow before full-throttle driving.
How the hood scoops work with the supercharger
The two scoops on top of the Hellcat hood are positioned to capture air as the vehicle moves forward. This air travels down through ducts built into the hood and feeds directly into the supercharger's intake manifold. At highway speeds and during acceleration, this ram-air effect increases the density of the air entering the supercharger, which boosts power output slightly.
The scoops are sealed to the hood structure, meaning air cannot escape to the sides or back. If the hood is cracked or the seals around the scoops are damaged, you lose some of that airflow efficiency. This is why a damaged Hellcat hood should not be ignored as a cosmetic issue — it affects how the engine performs under load.
Replacement hood costs and where to source one
A genuine Dodge Hellcat hood from a dealer typically costs between $800 and $1,200, depending on your model year and whether you need the hood painted to match your car. Painting adds $300 to $500 to the total. Unpainted OEM hoods are cheaper but require a trip to a body shop.
Aftermarket aluminum hoods designed for the Hellcat are available from specialty manufacturers, usually priced $600 to $900 before paint. These hoods replicate the scoop design and airflow path of the OEM hood. Before purchasing an aftermarket hood, confirm that it is designed for your specific model year — Hellcat hoods changed between the 2015–2018 generation and the 2019-and-later generation.
Used OEM hoods can be found through salvage yards or online marketplaces, often for $400 to $700, but you should inspect the scoops and seals carefully before buying. A hood with cracked scoops or damaged seals will not perform as intended.
Installation and what to expect at a body shop
Installing a Hellcat hood is straightforward for a body shop — it bolts on like any hood, using hinges and latches at the front. The job typically takes 30 minutes to an hour if the hood is already painted and ready to install. If you are having the hood painted at the same shop, add 3 to 7 days depending on the shop's schedule and the complexity of matching your car's paint.
When you drop off your car, ask the shop to inspect the hood latches and hinges while they have the hood off. These components wear over time and may need adjustment or replacement. A misaligned hood can rattle or not seal properly, which affects both the appearance and the airflow to the supercharger.
Differences between Hellcat hood generations
The 2015–2018 Charger Hellcat hood has scoops positioned slightly differently than the 2019-and-later design. Dodge refined the scoop angle and duct routing in the second generation to improve airflow. The mounting points are also different, so a 2015 hood will not bolt directly onto a 2020 Hellcat without modification.
If you are shopping for a replacement hood, confirm your car's model year before ordering. The hood itself looks similar to the untrained eye, but the internal duct work and bolt holes are generation-specific. A body shop can tell you the correct hood for your car if you are unsure.
Damage to watch for and when to replace
Cracks in the scoops are the most common damage to a Hellcat hood. Small cracks (under 2 inches) can sometimes be sealed with epoxy or fiberglass repair, but this is a temporary fix. Large cracks or cracks near the duct seams usually mean the hood should be replaced, because the repair will not hold up to engine vibration and airflow pressure.
Dents in the hood are cosmetic unless they are severe enough to deform the scoops or block airflow. A dent in the flat area of the hood can often be pulled out by a body shop without replacing the hood. Dents in the scoops themselves are harder to repair and may require replacement.
If the hood latches are bent or the hinges are cracked, the hood can still be used but may not close securely or may rattle while driving. This should be addressed before the hood is fully installed on your car.
Frequently Asked Questions
Can I use a standard Charger hood on my Hellcat?
No. A standard Charger hood lacks the functional scoops and internal ducts that feed air to the supercharger. Installing a non-Hellcat hood will reduce engine performance and may cause the supercharger to run hotter because it is not receiving the cold-air intake it was designed for.
How much does a Hellcat hood weigh?
An aluminum Hellcat hood weighs approximately 35 to 40 pounds, depending on the model year. This is about 10 to 15 pounds lighter than a steel hood, which is why Dodge chose aluminum for the Hellcat despite the higher cost.
Can I paint my Hellcat hood myself?
You can, but the scoops make it more difficult than painting a flat hood. Masking the scoop edges and getting an even coat inside the ducts requires patience and skill. Most owners have the hood painted at a body shop to may support the finish matches the rest of the car and to avoid paint drips inside the ducts.
What happens if I drive with a cracked hood scoop?
A small crack may not cause when ready problems, but it allows air to escape from the duct system, reducing the airflow to the supercharger. Over time, the crack will likely grow due to engine vibration and pressure changes. You will notice slightly lower power output and potentially higher supercharger temperatures under hard acceleration.
Are there carbon fiber Hellcat hoods available?
Yes, some aftermarket manufacturers offer carbon fiber hoods for the Hellcat, priced $1,200 to $2,000. These are lighter than aluminum but more expensive and require careful handling because carbon fiber can crack if impacted. They are popular with owners building high-performance versions of the Hellcat.