What you get with a stock Dodge Charger exhaust

The factory exhaust on a Dodge Charger is engineered to meet emissions standards while keeping noise and backpressure within acceptable limits for daily driving. The system runs from the engine manifolds through a catalytic converter, muffler, and resonator before exiting at the rear. On most Chargers, the stock setup is a single-exit design, meaning one tailpipe at the back — though some higher-performance models like the R/T and Scat Pack come with dual exhausts from the factory.

Stock exhausts prioritize longevity and cost control over performance. They're designed to last the life of the vehicle under normal conditions, but they also add weight and restrict airflow compared to aftermarket alternatives. If you're keeping your Charger stock and plan to drive it as-is, the factory system will serve you fine. If you're modifying the engine or want measurable gains in horsepower and sound, an upgrade becomes worth considering.

Key Takeaways

  • Stock Charger exhausts meet emissions standards and are built for durability, but they restrict airflow and add weight compared to performance alternatives.
  • Catback systems (everything behind the catalytic converter) cost $400 to $1,200 and require no tuning, while full systems run $800 to $2,500 and may need ECU adjustments on newer models.
  • Stainless steel exhausts last longer than aluminized steel but cost 30 to 50 percent more and offer no performance advantage over cheaper materials.
  • Horsepower gains from exhaust work alone are typically 5 to 15 HP on naturally aspirated engines and 10 to 25 HP on supercharged models, depending on what else you've modified.
  • Sound character changes dramatically with exhaust choice — a catback system will be noticeably louder, while a full system with a performance muffler can sound aggressive or refined depending on the brand.

Catback versus full exhaust systems

The difference between these two comes down to where the system starts. A catback exhaust begins after the catalytic converter and includes the muffler, resonator, and tailpipes. A full exhaust system starts at the engine manifolds or headers and replaces everything, including the catalytic converter and downpipe.

Catback systems are the most popular upgrade for Chargers because they're cheaper, don't require tuning on most model years, and are legal in all 50 states. They typically cost between $400 and $1,200 depending on material and brand. Full systems run $800 to $2,500 and deliver more airflow improvement, but they may trigger a check engine light on 2015 and newer Chargers unless you tune the ECU to account for the new oxygen sensor readings.

If you're not modifying the engine itself, a catback system gives you 80 percent of the sound improvement and 60 to 70 percent of the performance gain for half the cost. Full systems make sense if you're also adding headers, a supercharger, or tuning the engine for more power.

Material choices: stainless steel versus aluminized steel

Exhaust pipes are made from either aluminized steel or stainless steel. Aluminized steel has a thin aluminum coating that resists rust for 5 to 10 years under normal driving conditions. Stainless steel resists corrosion much longer — typically 15 to 20 years or more — and polishes to a mirror finish if you want a show appearance.

The trade-off is cost and weight. Stainless steel exhausts run 30 to 50 percent more than aluminized alternatives. A $600 aluminized catback might cost $900 to $1,000 in stainless. Neither material offers a performance advantage; the choice is purely about durability and appearance. If you live in a salt-heavy climate or plan to keep the car for 10+ years, stainless pays for itself. If you're in a dry climate or expect to sell within five years, aluminized is the practical choice.

Horsepower and torque gains from exhaust upgrades

Real-world gains depend on what engine you have and what else you've modified. On a stock naturally aspirated Charger (V8 or V6), a catback exhaust typically adds 5 to 10 horsepower and 5 to 8 lb-ft of torque. A full system with headers can push that to 15 to 20 HP. These numbers come from dyno testing by manufacturers like Flowmaster, Magnaflow, and American Racing Headers.

On supercharged models like the Scat Pack and Hellcat, the gains are larger because the engine is already producing more airflow. A catback on a Scat Pack might add 10 to 15 HP, while a full system with tuning can add 20 to 30 HP. The supercharger is already forcing air into the engine, so removing backpressure has a more noticeable effect.

These numbers assume a properly flowing system and no other modifications. If you've already added headers or a cold air intake, the exhaust upgrade will add less because you've already removed some of the restriction. Dyno testing your specific car before and after is the only way to know exactly what you gained.

Sound character and noise levels

Exhaust sound is subjective, but the physics is consistent: larger diameter pipes and fewer restrictions make the engine louder and higher-pitched. A stock Charger is relatively quiet at cruise and moderate throttle. A catback system will be noticeably louder under acceleration and at highway speeds, with a deeper tone. A full system with a performance muffler can range from aggressive and raspy (Borla, Magnaflow) to refined and muscular (Flowmaster, Corsa).

Most aftermarket exhausts for Chargers are in the 85 to 95 decibel range at full throttle, compared to 75 to 80 dB for stock. That's a significant difference in perceived loudness. Some brands offer muffler options that dial the sound up or down — Flowmaster's Delta Flow is quieter than their Super 10, for example. If you want to hear the engine without annoying neighbors, test drive a friend's car with the exhaust you're considering before buying.

Drone — a low-frequency vibration felt in the cabin at steady highway speeds — is common with some exhausts and rare with others. Resonators and muffler design control this. Brands like Corsa and Magnaflow are known for minimal drone, while some budget options can be tiresome on long drives. Read owner reviews on Charger forums before committing.

Installation, warranty, and legal considerations

Most catback exhausts bolt on in 1 to 2 hours with basic hand tools. Full systems take 3 to 4 hours and may require jack stands and a lift. Many shops charge $150 to $300 in labor for a catback and $300 to $500 for a full system. Some people do the work themselves if they have the space and tools; YouTube has detailed walkthroughs for popular Charger exhausts.

Warranty coverage varies by brand and dealer. Most aftermarket exhaust manufacturers offer a lifetime warranty against defects, but Dodge will not cover engine or emissions-related issues if an aftermarket exhaust is installed. Your factory warranty on the powertrain remains intact, but any failure that could be attributed to the exhaust voids coverage for that component. Full systems that replace the catalytic converter may trigger a check engine light if the ECU isn't tuned, which can fail emissions testing in states that require it.

Catback systems are street-legal in all 50 states because they don't alter emissions equipment. Full systems with high-flow catalytic converters are legal in most states but not California, which has stricter emissions rules. Check your state's regulations before ordering if you live in California or another state with CARB certification requirements.

Popular Charger exhaust brands and price ranges

The most common choices for Dodge Chargers are Flowmaster, Magnaflow, Borla, Corsa, and American Racing Headers. Flowmaster catbacks run $500 to $800 and are known for a classic muscle car sound. Magnaflow systems cost $600 to $1,000 and offer a more refined tone with less drone. Borla exhausts are $700 to $1,200 and deliver an aggressive, high-RPM sound. Corsa systems are premium-priced at $1,000 to $1,500 but are considered the quietest and most refined option.

Budget brands like Mbrp and Pypes offer catbacks for $300 to $500, but they tend to be louder and have more drone than the established names. If you're on a tight budget, they work, but most Charger owners report being happier with a mid-range option like Flowmaster or Magnaflow. Headers from American Racing, Hooker, or Edelbrock run $400 to $800 and are necessary if you want maximum performance gains.

Frequently Asked Questions

Will an exhaust system void my Dodge warranty?

Dodge will not cover powertrain or emissions-related failures if an aftermarket exhaust is installed, but your factory warranty on other components remains valid. If the exhaust itself fails, the manufacturer's warranty on that part covers it. A full system with a high-flow catalytic converter may trigger a check engine light, which could void coverage if Dodge determines the exhaust caused the issue.

How much horsepower will I actually gain?

A catback exhaust on a stock Charger adds 5 to 10 HP. A full system with headers can add 15 to 20 HP on naturally aspirated engines, or 20 to 30 HP on supercharged models. Real gains depend on your specific engine, what else you've modified, and how the system flows. Dyno testing is the only way to know for certain.

Can I install an exhaust myself?

Most catback systems bolt on in 1 to 2 hours with basic tools and no special skills required. Full systems take longer and may need a lift. YouTube has detailed installation videos for popular Charger exhausts. If you're not comfortable working under a car, a shop will charge $150 to $500 in labor depending on the system.

What's the difference between a muffler delete and a full catback?

A muffler delete removes the muffler entirely, leaving only the resonator. It's cheap ($50 to $150) and loud, but it can cause drone and sounds thin compared to a quality catback system. A catback replaces the muffler with a performance unit designed to flow better while controlling sound. It costs more but sounds better and performs better.

Do I need to tune my ECU after installing an exhaust?

Catback systems don't require tuning on any model year. Full systems may trigger a check engine light on 2015 and newer Chargers because the oxygen sensors read different airflow. A tune from a shop like Diablosport or HP Tuners corrects this, usually costing $300 to $600. Without a tune, the car runs fine but the light stays on.